Industrial pumps for projects in
The textiles division employs 1,496 people, 22% of manufacturing employment in the municipality (IBGE, CEMPRE 2024).
Known series or pump to be selected
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
I have a series or model
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
Industrial pump catalogI need to select a pump
Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.
Describe my applicationIndustry in Poá
Municipal figures, each with its source and year.
- 6,945persons employed in manufacturingIBGE, CEMPRE 2024
- R$ 4.6 billionmunicipal GDP, 2023IBGE, Municipal GDP
- 106,288inhabitants, 2026 estimateIBGE, Population Estimates
- 80 kmin a straight line to the factoryIBGE, municipal centroid
Manufacturing in Poá has 437 local units, with an average of 16 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after textiles, the next largest division is non-metallic mineral products, with 20% of manufacturing employment, followed by electrical equipment, with 14%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 30.8% of the municipality's gross value added; the median across the state's municipalities was 15.1% (IBGE, Municipal GDP).
How the distance is calculated
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.
The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentationLocal industry in numbers
Local units and persons employed in the manufacturing divisions, from largest to smallest.
| Division (CNAE) | Local units | Persons employed |
|---|---|---|
| 13 · Manufacture of textiles | 23 | 1,496 |
| 23 · Manufacture of other non-metallic mineral products | 16 | 1,408 |
| 27 · Manufacture of electrical machinery, apparatus and materials | 27 | 983 |
| 17 · Manufacture of pulp, paper and paper productsKraft pulp and paper guide | 20 | 902 |
| 25 · Manufacture of fabricated metal products, except machinery and equipment | 53 | 386 |
| 31 · Manufacture of furniture | 22 | 268 |
| 10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils | 29 | 265 |
| 33 · Maintenance, repair and installation of machinery and equipment | 62 | 254 |
| 22 · Manufacture of rubber and plastics products | 20 | 219 |
| 14 · Manufacture of wearing apparel and accessories | 52 | 212 |
| 28 · Manufacture of machinery and equipment | 21 | 129 |
| 32 · Manufacture of miscellaneous products | 26 | 85 |
| 24 · Metallurgy | 12 | 83 |
| 18 · Printing and reproduction of recorded media | 26 | 56 |
| 20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide | 9 | 50 |
| 29 · Manufacture of motor vehicles, trailers and semi-trailers | 5 | 50 |
| 30 · Manufacture of other transport equipment, except motor vehicles | 4 | 41 |
| 11 · Manufacture of beverages | 5 | 26 |
| Total manufacturing (section C) | 437 | 6,945 |
2 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.
Guides tied to this industry
Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.
Manufacture of food products
265 persons employed
Guide to syrups, molasses and vegetable oilsWhich series fits each fluid
Selection depends on the fluid and operating conditions. Location identifies the project and delivery destination.

External Gear Pumps
External gear pumps for viscous fluids. From 1/8″ to 4″, in stock in every configuration: ask our team for availability and pricing.
View the models
Internal Gear Pumps
Internal gear pumps for viscous fluid transfer. Review the configuration, materials and series documentation.
View the models
Centrifugal Pumps
Standardized centrifugal pumps for industrial processes. Compare curves, nozzles and dimensions to select a model.
View the models
Multistage Centrifugal Pumps
Horizontal construction with multiple stages for pressure elevation. Consult curves, sizes and technical documentation.
View the models
Thermal Oil Pumps
Pumps for thermal oil circulation in industrial heating systems. Consult the series operating conditions.
View the models
Fire Fighting Systems
Pumping sets for fire protection systems. Review available configurations and the scope of supply.
View the models
Custom Engineering
Skids, mobile sets and custom solutions. Send your process requirements for engineering review.
View the modelsUnderstand your application
Review process criteria and prepare the information for equipment selection.
Pumps for Sanitation, Water Treatment and Sewerage: Technical Guide for Brazilian Water Utilities
Centrifugal pump selection for raw water intake, treated water pumping, boosters, lift stations and water and wastewater treatment processes: fluid and solids, materials, sealing arrangements, NPSH and the documented limits of the FBCN line — and where the right technology is a different one.
Pumps for Chemical and Pharmaceutical Industry: Selection Guide by Material and Fluid Family
Pump selection for acids, caustic bases, organic solvents, polymers, intermediates and pharmaceutical plant utilities — criteria for material, sealing, classified areas and the boundary between chemical service and sanitary product contact.
Pumps for Petrochemical and Fuels: Technical Guide for Distribution Bases and Terminals
Pump selection for diesel S10, gasoline C, jet fuel (QAV-1), heavy fuel oil and refinery utilities — NPSH in volatile products, classified areas and Ex certification, sealing and the FB Bombas service scope.
Pumps for HVAC, Building Pressurization and Water Supply: Technical Guide for Commercial Buildings and Hospitals
Chilled water, condenser water, transfer and boosting have different demands. Organise thermal load, flow, head, water quality and controls to assess FBCN against actual building conditions.
What to send for a technical proposal
Send what you have. Engineering asks for anything missing during the review.
Fluid and process
What needs to be pumped, where it comes from and where it needs to go.
Operating conditions
Flow, pressure or head, temperature and operating schedule, when known.
Equipment and installation
Series, model, identification and space or connection constraints, if a pump is already installed.
Destination and supply
Project location, requested scope and documents required for your purchase.
Direct service from the factory
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasManuals and guides by series and application
Use the family documentation and application guides to prepare your request.
Technical manuals
Installation, operation and maintenance by series, with the document language identified.
Technical pump manualsApplication guides
Understand the process information needed to specify the equipment.
Industrial pump applicationsMore on industrial pumps in Poá
The state page, nearby cities and cities with the same largest division by employment, with the closest number of local units in IBGE’s CEMPRE 2024.
In the same region
Questions about our service
Information to help you prepare your inquiry to FB Bombas.
Which manufacturing division employs the most people in Poá?
Manufacture of textiles, with 1,496 persons employed in 23 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.
How far is Poá from the FB Bombas factory?
About 80 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
Where can I find installation, operation and maintenance instructions for FB Bombas pumps?
It depends on the series. Installation and operation instructions are in FBEI manual MAN001-10 and in FBME service manual MSERV-08/01, which also covers maintenance and recommends supervision authorized by FB Bombas during installation.
The FBE (MTEC-01/01), FBCN (MTEC-03/00) and FBOT (MTEC-16/00) technical manuals provide technical data, sectional drawings, parts lists and dimensions; for installing and maintaining these series, the published services include on-site start-up and commissioning and maintenance contracts. The manuals are on the website’s technical manuals page (PDFs in Portuguese), and MSERV-08/01 is on the FBME series page.
For the operation, identify the series and model from the pump’s nameplate.
Are FB Bombas pumps energy efficient?
It depends on the model and the duty point; there is no single efficiency figure for the brand. The FBCN and FBME characteristic curves show the efficiency of each model and, for stainless-steel impellers with passages up to 15 mm, the FBCN manual deducts 2 or 3 points from the curve efficiency (Table 4).
For the project, compare the absorbed power at the process flow, head and fluid, also considering drive, control and operating duty.
Up to what temperature can FB Bombas pumps operate?
It depends on the series. The published limits are up to 260 °C for the FBCN, 350 °C for the FBOT, 340 °C for the FBEI and 140 °C for the FBME. For the FBE, the 2026 catalogue gives a range of 10 °C to 500 °C; the limit of each configuration depends on materials and sealing.
These are series limits: they do not automatically apply to every model, nor do they necessarily occur together with the other maximums. State the start-up, operating and cleaning temperatures of the process.
Are FB Bombas pumps easy to maintain?
It depends on the series. On the FBCN and FBOT, back pull-out construction allows the bearing-housing assembly to be removed without disconnecting the piping, and the FBEI catalogue also indicates back pull-out construction. The FBE external gear pump is not back pull-out: its shafts are supported on bushings.
Before working on the equipment, check the series manual, the sectional drawing and the parts list.
Send your process data to engineering in Cabreúva
Your message goes straight to the factory team.
What happens next
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Application details
Describe the fluid, application and project destination. Include the model and technical data you already have.
