Manufacture of food products
399 persons employed
Guide to syrups, molasses and vegetable oilsThe textiles division employs 629 people, 30% of manufacturing employment in the municipality (IBGE, CEMPRE 2024).
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
Industrial pump catalogTell us the fluid and what the pump will do: transfer, circulate or feed another unit.
Describe my applicationMunicipal figures, each with its source and year.
Manufacturing in Campo Verde has 259 local units, with an average of 8 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after textiles, the next largest division is food products, with 19% of manufacturing employment, followed by repair and installation of machinery, with 17%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 10.7% of the municipality's gross value added; the median across the state's municipalities was 7.2% (IBGE, Municipal GDP).
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.
The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentationLocal units and persons employed in the manufacturing divisions, from largest to smallest.
| Division (CNAE) | Local units | Persons employed |
|---|---|---|
| 13 · Manufacture of textiles | 25 | 629 |
| 10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils | 30 | 399 |
| 33 · Maintenance, repair and installation of machinery and equipment | 71 | 350 |
| 25 · Manufacture of fabricated metal products, except machinery and equipment | 55 | 220 |
| 20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide | 11 | 161 |
| 23 · Manufacture of other non-metallic mineral products | 17 | 74 |
| 14 · Manufacture of wearing apparel and accessories | 8 | 33 |
| 16 · Manufacture of wood products | 3 | 26 |
| 22 · Manufacture of rubber and plastics products | 4 | 20 |
| 28 · Manufacture of machinery and equipment | 4 | 19 |
| 18 · Printing and reproduction of recorded media | 8 | 13 |
| 31 · Manufacture of furniture | 6 | 13 |
| 29 · Manufacture of motor vehicles, trailers and semi-trailers | 4 | 12 |
| 32 · Manufacture of miscellaneous products | 5 | 10 |
| Total manufacturing (section C) | 259 | 2,092 |
7 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.
Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.
399 persons employed
Guide to syrups, molasses and vegetable oils161 persons employed
Chemical and pharmaceutical process guideSelection depends on the fluid and operating conditions. Location identifies the project and delivery destination.

External gear pumps for viscous fluids. From 1/8″ to 4″, in stock in every configuration: ask our team for availability and pricing.
View the models
Internal gear pumps for viscous fluid transfer. Review the configuration, materials and series documentation.
View the models
Standardized centrifugal pumps for industrial processes. Compare curves, nozzles and dimensions to select a model.
View the models
Horizontal construction with multiple stages for pressure elevation. Consult curves, sizes and technical documentation.
View the models
Pumps for thermal oil circulation in industrial heating systems. Consult the series operating conditions.
View the models
Pumping sets for fire protection systems. Review available configurations and the scope of supply.
View the models
Skids, mobile sets and custom solutions. Send your process requirements for engineering review.
View the modelsReview process criteria and prepare the information for equipment selection.
Centrifugal pump selection for raw water intake, treated water pumping, boosters, lift stations and water and wastewater treatment processes: fluid and solids, materials, sealing arrangements, NPSH and the documented limits of the FBCN line — and where the right technology is a different one.
Pump selection for acids, caustic bases, organic solvents, polymers, intermediates and pharmaceutical plant utilities — criteria for material, sealing, classified areas and the boundary between chemical service and sanitary product contact.
Pump selection for diesel S10, gasoline C, jet fuel (QAV-1), heavy fuel oil and refinery utilities — NPSH in volatile products, classified areas and Ex certification, sealing and the FB Bombas service scope.
Chilled water, condenser water, transfer and boosting have different demands. Organise thermal load, flow, head, water quality and controls to assess FBCN against actual building conditions.
Send what you have. Engineering asks for anything missing during the review.
What needs to be pumped, where it comes from and where it needs to go.
Flow, pressure or head, temperature and operating schedule, when known.
Series, model, identification and space or connection constraints, if a pump is already installed.
Project location, requested scope and documents required for your purchase.
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasUse the family documentation and application guides to prepare your request.
Installation, operation and maintenance by series, with the document language identified.
Technical pump manualsUnderstand the process information needed to specify the equipment.
Industrial pump applicationsThe state page, nearby cities and cities with the same largest division by employment, with the closest number of local units in IBGE’s CEMPRE 2024.
Information to help you prepare your inquiry to FB Bombas.
Manufacture of textiles, with 629 persons employed in 25 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.
About 1,205 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
It depends on the series. On the FBCN and FBOT, back pull-out construction allows the bearing-housing assembly to be removed without disconnecting the piping, and the FBEI catalogue also indicates back pull-out construction. The FBE external gear pump is not back pull-out: its shafts are supported on bushings.
Before working on the equipment, check the series manual, the sectional drawing and the parts list.
The portfolio includes pumping sets for fire protection systems. Provide the project, duty point, drive arrangement and required standards and acceptance criteria. Compliance must be checked for the supplied set; standards such as NFPA 20 and NBR 16704 are not certificates issued for the entire company.
Manual MTEC-03/00 does not state that compliance: it states FBCN mechanical construction per ASME B73.1, not its dimensions. So, before a replacement, interchangeability with the existing pump is checked on each model’s drawing, together with the duty point, materials and drive.
The review considers the fluid, flow, required pressure or head, temperature, viscosity and installation conditions. Provide what you already know and identify any equipment in use. The team checks the necessary data before confirming series, model, drive and materials.
Your message goes straight to the factory team.
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Describe the fluid, application and project destination. Include the model and technical data you already have.