Gear pumps (internal & external) and centrifugal pumps manufactured in Cabreúva/SP. Serving São Lourenço da Mata and region — factory 2125km away. Technical response within 24h.
Gear pumps (internal & external) and centrifugal pumps manufactured in Cabreúva/SP. Serving São Lourenço da Mata and region — factory 2125km away. Technical response within 24h.
Years
Certified
Warranty
Direct answer for industrial projects — recommended series, standards compliance and logistics.
São Lourenço da Mata, Pernambuco is FB Bombas territory: FBE+FBEI, FBCN+FBOT series for sucroalcooleiro, vertically integrated manufacturing in Cabreúva-SP (2136 km), API 610/676 compliance and Petrobras CRCC. Typical lead time: 96h to 7 days.
FB Bombas is a Brazilian manufacturer of industrial pumps serving São Lourenço da Mata, Pernambuco, with the FBE series applied to the sucroalcooleiro sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and certification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. São Lourenço da Mata sits 31 km from the port cluster centered in Cabo De Santo Agostinho, a proximity that usually means shared suppliers and aligned maintenance standards. The BR-101 (via AL) corridor combined with highways BR-101, BR-232 and BR-116 composes the freight mesh to São Lourenço da Mata — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. São Lourenço da Mata's industrial profile centers on Sucroalcooleiro and Alimentos — sectors with specific pumping demands that FB Bombas meets with dedicated product series. The melaço, óleos lubrificantes, óleos comestíveis and caldo de cana profile observed in São Lourenço da Mata maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. In São Lourenço da Mata, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. Membership in the Metropolitana de Recife mesoregion (IBGE) places São Lourenço da Mata in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. For projects in São Lourenço da Mata that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. For São Lourenço da Mata, where sucroalcooleiro is the dominant calling, FB Bombas recommends the FBE series: FBE external gear pumps for transfer of molasses, ethanol, lubricating oils and viscous fluids in sugarcane mills. Technical window: Ideal for molasses and honey, Operation with crystallized products, Easy cleaning. Based in Cabreúva-SP at 2136 km via BR-101 (via AL), FB Bombas delivers to São Lourenço da Mata industrial pumps manufactured in-house since 1944 plus continuous technical support.
For the technical profile observed in São Lourenço da Mata, FB Bombas application engineering recommends FBE+FBEI and FBCN+FBOT as a starting point for sizing, subject to refinement per Q×H curve, available NPSH and actual fluid temperature. Sitting in the technical context of a portuario cluster, São Lourenço da Mata benefits from accumulated learning around bunker fuel oil (BPF), seawater for cooling and liquid bulk movement. The transferência de melaço, dosagem de aditivos, transferência de óleos and circulação de caldo set accounts for a large share of industrial demand in São Lourenço da Mata; FB Bombas keeps documented history of analogous applications for sizing benchmarks. In São Lourenço da Mata, the sealing strategy starts at single cartridge mechanical seal (Plan 11/13) for general service, upgradable to dual when the fluid requires secondary containment — combined with API 682 plan selection (Plan 11/13/52/53/62) and specific commissioning care. In São Lourenço da Mata, FBCN centrifugal pumps with flow up to 2,200 m³/h, head up to 135 m and temperature up to 260°C (thermal oil via FBOT up to 350°C) — this range covers most of the Q×H diagram operated in the field; off-envelope points are handled with custom selection (trimmed impeller, larger motor, double-suction when applicable). For melaço, óleos lubrificantes and óleos comestíveis in São Lourenço da Mata, the baseline is AISI 316 or for chloride resistance in marine atmosphere — FB engineering tunes from immersion tests, field history and iron/stainless/duplex compatibility within the local fluid classes. Technical-and-commercial support for São Lourenço da Mata is covered from Cabreúva-SP, with typical lead time for critical parts of 96h to 7 days via dedicated carrier.
São Lourenço da Mata: logistics is a significant economic factor — order consolidation and integrated packages are recommended — a relevant input for pricing and commercial strategy. São Lourenço da Mata: by affinity to the portuario cluster, continuous flow with seasonality tied to agricultural harvests (bulk) and fuel supply — a variable that enters commercial planning. At state scale, São Lourenço da Mata belongs to the set of cities with relevant industrial scale in the state. São Lourenço da Mata: medium density — regular and predictable opportunity pipeline — a variable influencing commercial strategy and service logistics. With a GDP of R$ 1.8 billion (IBGE, 2023) and industry accounting for 17.7% of value added (2021), São Lourenço da Mata combines productive plants with a strong services sector — the typical mix demanding utility centrifugals and process pumps in parallel. São Lourenço da Mata has sucroalcooleiro as its main industrial-pump application front — from primary transfer to internal circulation in process equipment. Being among the 50 most populous cities in PE, maintains a relevant industrial base, São Lourenço da Mata presents volume and application diversity that justify FB Bombas' structured service. In São Lourenço da Mata, an active industrial neighborhood enables freight consolidation and technical-visit routing — operational efficiency reflected in shorter lead times. bunker (BPF fuel oil), marine cooling water and liquid-bulk discharge: this is the typical application set around the portuario cluster in which São Lourenço da Mata sits. São Lourenço da Mata: melaço, óleos lubrificantes and óleos comestíveis. Each fluid defines a distinct set of pump requirements — flow, available NPSH, sealing strategy. For São Lourenço da Mata, series FBE+FBEI for transferência de melaço and dosagem de aditivos and series FBCN+FBOT for circulação de caldo and destilação — initial reference for technical discussion with application engineering.
Cabreúva-SP → São Lourenço da Mata via BR-101 (via AL) (2136 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. The BR-101, BR-232 and BR-116 mesh provides logistics redundancy for São Lourenço da Mata — when one route is restricted (rains, construction, accidents), delivery is rerouted without compromising the critical lead time. For São Lourenço da Mata, 72h to 7 days, depending on modal and dry season is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. The distance to São Lourenço da Mata opens room for multimodal routing — road + rail combination (where available) reduces total freight cost in high-volume projects. For São Lourenço da Mata, FB service follows the technical visits planned as a mission — concentrated agenda to cover multiple plants in a single trip model — application engineers conduct pre-scheduled visits while remote support via documentation and phone covers point queries. For São Lourenço da Mata, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
Technical inquiry for São Lourenço da Mata: the FB Bombas team evaluates operating regime, fluid, available NPSH and construction configurations — return with a sized proposal in 24-48 business hours.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Own factory in Cabreúva/SP with full production capability, serving São Lourenço da Mata and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves São Lourenço da Mata and the entire Pernambuco region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteComplete pumping solutions for all industrial needs
Our technical team is ready to develop the ideal solution for your application
Contact Us
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for São Lourenço da Mata
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
FB Bombas serves São Lourenço da Mata and neighboring municipalities with the same technical team — optimized visits and supply in joint campaigns.
Beyond São Lourenço da Mata, FB Bombas supplies the FBE series for sucroalcooleiro plants across multiple Brazilian cities — shared technical repertoire, field-validated materials and traceable Data Book on every project.
It does. FB pumps for stationary fire protection systems follow the NFPA standard (National Fire Protection Association) and ABNT's NBR 16704, requirements demanded in building and industrial projects that call for these certifications.
Application engineering starts from four variables — flow, differential pressure, temperature and viscosity — and refines with available NPSH, duty cycle and chemical compatibility. The study is free for customers in São Lourenço da Mata and results in the exact model recommendation, not a generic family.
Yes. The FAT (Factory Acceptance Test) is executed on the factory bench in Cabreúva/SP, with hydraulic test, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration — witnessed by customer inspection when specified. For projects in São Lourenço da Mata, the SAT (Site Acceptance Test) is supported by application engineering during commissioning, with startup checklist, laser alignment and baseline vibration-signature capture.
Contact can be made via WhatsApp at +55 11 97287-4837, email comercial@fbbombas.com.br or through the form on our website. Technical response is prioritized on the same business day, with direct reply from the application engineering team.
ISO 21940 G2.5 is the grade applied to the rotating set of FB Bombas pumps — direct equivalence with what API 610 asks for heavy-duty service. Critical projects in São Lourenço da Mata depend on this standard: continuous-regime operation, online vibration monitoring at the plant or high cost tied to unplanned downtime. When rotation exceeds 3,600 RPM or rotating mass goes over 50 kg, two-plane balancing is executed using a piezoelectric sensor.
They are. The ASME B73.1 normalization (North American dimensional standard for end-suction process pumps) adopted in the FBCN series makes the pump-and-motor set swappable with KSB, Sulzer, Goulds and Flowserve units already operating in São Lourenço da Mata plants. In a typical retrofit, baseplate, suction/discharge piping and foundations are preserved — only the rotating set is replaced. The dimensional gap analysis is executed by FB application engineering before supplying.
Yes. The entire metropolitan region and the microregions around São Lourenço da Mata receive from FB Bombas the same technical support and logistics structure. With this regional reach, industrial plants spread across several cities are served in a coordinated manner.
The local industrial profile concentrates demand on viscous fluid transfer — circulação de caldo e transferência de melaço em usinas. In these services, the FBE series delivers stable flow regardless of pressure and operates up to 350 °C with a heating jacket, covering from lubricating oils to asphalt and resins.
Mechanical seal configuration is defined by engineering according to the fluid, temperature and operating pressure. Options include single seals, double seals (tandem or back-to-back), cartridge seals and packing glands for specific applications. For hazardous fluids, double seals with barrier are recommended.
For water, condensate and low-viscosity fluids, the recommendation is the FBCN standardized centrifugal — 53 models with bench-tested curves and back-pull-out maintenance, which frees the rotating assembly without dismantling the piping. The exact model comes from the circuit’s flow × head pair.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
