Skip to main content

Industrial pumps for projects in Franco da Rocha, São Paulo

The fabricated metal products division employs 845 people, 20% of manufacturing employment in the municipality (IBGE, CEMPRE 2024).

Known series or pump to be selected

Do you already know the pump or need help defining it? Choose the next step for your industrial project.

I have a series or model

Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.

Industrial pump catalog

I need to select a pump

Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.

Describe my application

Industry in Franco da Rocha

Municipal figures, each with its source and year.

Manufacturing in Franco da Rocha has 257 local units, with an average of 17 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after fabricated metal products, the next largest division is chemicals, with 18% of manufacturing employment, followed by rubber and plastics, with 13%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 35.0% of the municipality's gross value added; the median across the state's municipalities was 15.1% (IBGE, Municipal GDP).

How the distance is calculated

Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.

The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.

IBGE Mesh API documentation
Replacement, supply and receiving guidance for this state.

Local industry in numbers

Local units and persons employed in the manufacturing divisions, from largest to smallest.

Industrial profile of Franco da Rocha — 2024
Division (CNAE)Local unitsPersons employed
25 · Manufacture of fabricated metal products, except machinery and equipment32845
20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide21755
22 · Manufacture of rubber and plastics products47565
14 · Manufacture of wearing apparel and accessories26429
28 · Manufacture of machinery and equipment14237
19 · Manufacture of coke, petroleum products and biofuels4211
27 · Manufacture of electrical machinery, apparatus and materials8200
33 · Maintenance, repair and installation of machinery and equipment34187
13 · Manufacture of textiles4185
10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils19174
32 · Manufacture of miscellaneous products10157
29 · Manufacture of motor vehicles, trailers and semi-trailers7146
24 · Metallurgy788
23 · Manufacture of other non-metallic mineral products642
31 · Manufacture of furniture318
16 · Manufacture of wood products312
18 · Printing and reproduction of recorded media44
17 · Manufacture of pulp, paper and paper productsKraft pulp and paper guide63
Total manufacturing (section C)2574,259

2 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.

Source: IBGE, Central Business Register 2024 (table 9528).

Guides tied to this industry

Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.

Understand your application

Review process criteria and prepare the information for equipment selection.

What to send for a technical proposal

Send what you have. Engineering asks for anything missing during the review.

  1. Fluid and process

    What needs to be pumped, where it comes from and where it needs to go.

  2. Operating conditions

    Flow, pressure or head, temperature and operating schedule, when known.

  3. Equipment and installation

    Series, model, identification and space or connection constraints, if a pump is already installed.

  4. Destination and supply

    Project location, requested scope and documents required for your purchase.

Direct service from the factory

FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.

About FB Bombas

Manuals and guides by series and application

Use the family documentation and application guides to prepare your request.

Technical manuals

Installation, operation and maintenance by series, with the document language identified.

Technical pump manuals

Questions about our service

Information to help you prepare your inquiry to FB Bombas.

Which manufacturing division employs the most people in Franco da Rocha?

Manufacture of fabricated metal products, except machinery and equipment, with 845 persons employed in 32 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.

How far is Franco da Rocha from the FB Bombas factory?

About 35 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.

How long has FB Bombas been in the market?

FB Bombas began manufacturing industrial pumps in 1944. The Our History page presents the company’s development; each series’ technical documentation supports equipment evaluation for your project.

What types of fluids can FB Bombas pumps handle?

It depends on the series. The catalogue for the FBE external gear pump lists oils in general, greases, asphalt, diesel oil, kerosene, paints, varnishes, resins and solvents, as well as lubrication systems and hydraulic equipment. The FBEI internal gear pump is intended for high-viscosity liquids.

The FBCN and FBME handle clean or turbid liquids, and the FBOT handles organic thermal oils free of abrasive particles and of substances that chemically attack the pump. For the process, state the composition, temperature, viscosity and solids content; fluids with suspended solids must be assessed by FB Bombas engineering.

Does FB Bombas retrofit older pumps?

By replacement, not refurbishment. FB Bombas replaces the old pump with a new, complete FB Bombas pump. Before the order, engineering assesses the installation and issues a data sheet and dimensional drawing; the drawing confirms whether the existing baseplate and piping can be kept or need adaptation.

FB Bombas does not refurbish other manufacturers’ pumps, sell third-party parts or reuse the installed casing. For FB Bombas pumps in service, it supplies original parts and maintenance contracts.

Does FB Bombas serve fire protection systems?

The portfolio includes pumping sets for fire protection systems. Provide the project, duty point, drive arrangement and required standards and acceptance criteria. Compliance must be checked for the supplied set; standards such as NFPA 20 and NBR 16704 are not certificates issued for the entire company.

Send your process data to engineering in Cabreúva

Your message goes straight to the factory team.

What happens next

The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.

Application details

Describe the fluid, application and project destination. Include the model and technical data you already have.

Your contact detailsComplete the fields marked as required.

Include the area code. No need to repeat +55.

Fluid, application or model, if you already know it.

Our team replies with the quote or with any questions we still have.