Skip to main content

Known series or pump to be selected

Do you already know the pump or need help defining it? Choose the next step for your industrial project.

I have a series or model

Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.

Industrial pump catalog

I need to select a pump

Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.

Describe my application

Industry in Itaúna

Municipal figures, each with its source and year.

Manufacturing in Itaúna has 529 local units, with an average of 20 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after basic metals, the next largest division is wearing apparel, with 13% of manufacturing employment, followed by fabricated metal products, with 13%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 51.5% of the municipality's gross value added; the median across the state's municipalities was 7.6% (IBGE, Municipal GDP).

How the distance is calculated

Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.

The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.

IBGE Mesh API documentation
Replacement, supply and receiving guidance for this state.

Local industry in numbers

Local units and persons employed in the manufacturing divisions, from largest to smallest.

Industrial profile of Itaúna — 2024
Division (CNAE)Local unitsPersons employed
24 · Metallurgy441,634
14 · Manufacture of wearing apparel and accessories401,415
25 · Manufacture of fabricated metal products, except machinery and equipment801,337
10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils83986
13 · Manufacture of textiles18905
28 · Manufacture of machinery and equipment29795
22 · Manufacture of rubber and plastics products11789
32 · Manufacture of miscellaneous products19505
29 · Manufacture of motor vehicles, trailers and semi-trailers8472
15 · Preparation of leather and manufacture of leather goods, travel goods and footwear7315
23 · Manufacture of other non-metallic mineral products42309
20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide9260
33 · Maintenance, repair and installation of machinery and equipment62226
17 · Manufacture of pulp, paper and paper productsKraft pulp and paper guide8174
11 · Manufacture of beverages10135
16 · Manufacture of wood products29124
30 · Manufacture of other transport equipment, except motor vehicles482
31 · Manufacture of furniture1551
18 · Printing and reproduction of recorded media743
Total manufacturing (section C)52910,575

2 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.

Source: IBGE, Central Business Register 2024 (table 9528).

Guides tied to this industry

Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.

Understand your application

Review process criteria and prepare the information for equipment selection.

What to send for a technical proposal

Send what you have. Engineering asks for anything missing during the review.

  1. Fluid and process

    What needs to be pumped, where it comes from and where it needs to go.

  2. Operating conditions

    Flow, pressure or head, temperature and operating schedule, when known.

  3. Equipment and installation

    Series, model, identification and space or connection constraints, if a pump is already installed.

  4. Destination and supply

    Project location, requested scope and documents required for your purchase.

Direct service from the factory

FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.

About FB Bombas

Manuals and guides by series and application

Use the family documentation and application guides to prepare your request.

Technical manuals

Installation, operation and maintenance by series, with the document language identified.

Technical pump manuals

Questions about our service

Information to help you prepare your inquiry to FB Bombas.

Which manufacturing division employs the most people in Itaúna?

Metallurgy, with 1,634 persons employed in 44 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.

How far is Itaúna from the FB Bombas factory?

About 435 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.

Up to what temperature can FB Bombas pumps operate?

It depends on the series. The published limits are up to 260 °C for the FBCN, 350 °C for the FBOT, 340 °C for the FBEI and 140 °C for the FBME. For the FBE, the 2026 catalogue gives a range of 10 °C to 500 °C; the limit of each configuration depends on materials and sealing.

These are series limits: they do not automatically apply to every model, nor do they necessarily occur together with the other maximums. State the start-up, operating and cleaning temperatures of the process.

What types of pumps does FB Bombas manufacture?

The catalogue includes FBE external gear, FBEI internal gear, FBCN standardized centrifugal, FBME multistage centrifugal and FBOT thermal oil pumps, fire systems and custom solutions. Review each family’s documentation; configuration and availability are confirmed in the quotation.

Does FB Bombas retrofit older pumps?

By replacement, not refurbishment. FB Bombas replaces the old pump with a new, complete FB Bombas pump. Before the order, engineering assesses the installation and issues a data sheet and dimensional drawing; the drawing confirms whether the existing baseplate and piping can be kept or need adaptation.

FB Bombas does not refurbish other manufacturers’ pumps, sell third-party parts or reuse the installed casing. For FB Bombas pumps in service, it supplies original parts and maintenance contracts.

Is the FBCN dimensionally compliant with ASME B73.1?

Manual MTEC-03/00 does not state that compliance: it states FBCN mechanical construction per ASME B73.1, not its dimensions. So, before a replacement, interchangeability with the existing pump is checked on each model’s drawing, together with the duty point, materials and drive.

Send your process data to engineering in Cabreúva

Your message goes straight to the factory team.

What happens next

The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.

Application details

Describe the fluid, application and project destination. Include the model and technical data you already have.

Your contact detailsComplete the fields marked as required.

Include the area code. No need to repeat +55.

Fluid, application or model, if you already know it.

Our team replies with the quote or with any questions we still have.