Gear & Centrifugal Pumps in São Luís

FB pumps are supplied with a warranty against manufacturing defects according to the terms detailed in the commercial proposal. The warranty assumes installation, operation and maintenance within the parameters specified in the manual and sizing performed by engineering. Consult our technical team for specific details of your project in São Luís.

Yes. FB Bombas manufactures pumps for stationary fire protection systems in compliance with NFPA (National Fire Protection Association) and ABNT NBR 16704 standards, serving building and industrial projects that require these certifications.

Yes. FB Bombas application engineering supports ISO 10816 vibration analysis (velocity RMS in mm/s) for diagnosing misalignment, imbalance, bearing defects and cavitation on pumps installed in São Luís. The service includes baseline capture at startup, spectral comparison during PM campaigns, and intervention recommendations (re-balancing, bearing replacement, laser alignment) before vibration exceeds the standard’s zone D.

Maximum temperature depends on the series: FBE and FBEI operate up to 350°C with heating jacket and special sealing; FBOT operates up to 350°C in thermal oil circuits; FBCN operates up to 250°C with proper materials and sealing. Correct sizing of sealing and materials is essential for safe operation.

Yes. The FBCN series complies with ISO 2858 (European interchangeability) and ASME B73.1 (North American interchangeability) — a feature that enables dimensional retrofit on existing baseplates in São Luís plants originally equipped with global manufacturers. Shaft dimensions, suction/discharge flanges, casing feet and impeller centerline follow the respective standards; the rotating set is swapped without changing piping or baseplate.

The FB Bombas rotating set is balanced per ISO 21940 G2.5 (a balancing grade equivalent to API 610 requirements for heavy-duty service) — required for critical projects in São Luís with continuous regime, plants with online vibration monitoring or applications with high cost of unplanned downtime. For machines running above 3,600 RPM or with rotating mass over 50 kg, balancing is performed on two planes with a piezoelectric sensor.

Lead time depends on the chosen series, construction materials and stock availability. For standard configuration pumps, lead times are shorter; for special or custom constructions, the schedule is informed in the technical proposal. Logistics for São Luís is handled by our regular road operator.

Service to São Luís is handled directly by the FB Bombas team at the Cabreúva/SP factory — no intermediaries, no resellers. That means direct contact with application engineering for sizing, technical quotes returned within 24h and original spare parts supplied without distributor markup. On-site technical visits to São Luís are planned based on project criticality.

Yes. The FAT (Factory Acceptance Test) is executed on the factory bench in Cabreúva/SP, with ANSI/HI 14.6 hydraulic test, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration — witnessed by customer inspection when specified. For projects in São Luís, the SAT (Site Acceptance Test) is supported by application engineering during commissioning, with startup checklist, laser alignment and baseline vibration-signature capture.

Yes. FB Bombas is a Brazilian industrial-pump manufacturer since 1944, with a factory in Cabreúva/SP and a technical team for projects in São Luís. The FBCN (centrifugal), FBE/FBEI (gear) and FBOT (thermal oil) series cover applications typically served by global manufacturers such as KSB, Sulzer, Imbil and Grundfos — with advantages in lead time (no import), direct support without intermediaries, fast spare-parts availability and Portuguese-speaking application engineering. For retrofits, ASME B73.1 normalization ensures dimensional interchangeability with existing baseplates.