Skip to main content

Known series or pump to be selected

Do you already know the pump or need help defining it? Choose the next step for your industrial project.

I have a series or model

Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.

Industrial pump catalog

I need to select a pump

Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.

Describe my application

Industry in Feira de Santana

Municipal figures, each with its source and year.

Manufacturing in Feira de Santana has 2,306 local units, with an average of 11 persons employed per unit (IBGE, CEMPRE 2024). After rubber and plastics, the next largest division is food products, with 16% of manufacturing employment, followed by pulp and paper, with 9%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 25.9% of the municipality's gross value added; the median across the state's municipalities was 6.3% (IBGE, Municipal GDP).

How the distance is calculated

Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.

The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.

IBGE Mesh API documentation
Replacement, supply and receiving guidance for this state.

Local industry in numbers

Local units and persons employed in the manufacturing divisions, from largest to smallest.

Industrial profile of Feira de Santana — 2024
Division (CNAE)Local unitsPersons employed
22 · Manufacture of rubber and plastics products1144,052
10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils3793,965
17 · Manufacture of pulp, paper and paper productsKraft pulp and paper guide832,256
13 · Manufacture of textiles541,819
25 · Manufacture of fabricated metal products, except machinery and equipment2121,556
23 · Manufacture of other non-metallic mineral products1801,396
27 · Manufacture of electrical machinery, apparatus and materials271,379
14 · Manufacture of wearing apparel and accessories2841,194
20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide961,097
31 · Manufacture of furniture1761,028
32 · Manufacture of miscellaneous products163952
33 · Maintenance, repair and installation of machinery and equipment192641
24 · Metallurgy7554
11 · Manufacture of beverages17503
18 · Printing and reproduction of recorded media108409
29 · Manufacture of motor vehicles, trailers and semi-trailers53356
15 · Preparation of leather and manufacture of leather goods, travel goods and footwear44294
16 · Manufacture of wood products45243
21 · Manufacture of pharmaceutical chemicals and pharmaceutical products6236
28 · Manufacture of machinery and equipment31134
26 · Manufacture of computer, electronic and optical products17128
30 · Manufacture of other transport equipment, except motor vehicles931
19 · Manufacture of coke, petroleum products and biofuels923
Total manufacturing (section C)2,30624,246

Source: IBGE, Central Business Register 2024 (table 9528).

Guides tied to this industry

Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.

Understand your application

Review process criteria and prepare the information for equipment selection.

What to send for a technical proposal

Send what you have. Engineering asks for anything missing during the review.

  1. Fluid and process

    What needs to be pumped, where it comes from and where it needs to go.

  2. Operating conditions

    Flow, pressure or head, temperature and operating schedule, when known.

  3. Equipment and installation

    Series, model, identification and space or connection constraints, if a pump is already installed.

  4. Destination and supply

    Project location, requested scope and documents required for your purchase.

Direct service from the factory

FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.

About FB Bombas

Manuals and guides by series and application

Use the family documentation and application guides to prepare your request.

Technical manuals

Installation, operation and maintenance by series, with the document language identified.

Technical pump manuals

Questions about our service

Information to help you prepare your inquiry to FB Bombas.

Which manufacturing division employs the most people in Feira de Santana?

Manufacture of rubber and plastics products, with 4,052 persons employed in 114 local units, according to IBGE's 2024 Central Business Register (CEMPRE); the table on this page lists the other divisions.

How far is Feira de Santana from the FB Bombas factory?

About 1,495 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.

Does FB Bombas retrofit older pumps?

By replacement, not refurbishment. FB Bombas replaces the old pump with a new, complete FB Bombas pump. Before the order, engineering assesses the installation and issues a data sheet and dimensional drawing; the drawing confirms whether the existing baseplate and piping can be kept or need adaptation.

FB Bombas does not refurbish other manufacturers’ pumps, sell third-party parts or reuse the installed casing. For FB Bombas pumps in service, it supplies original parts and maintenance contracts.

Does FB Bombas serve fire protection systems?

The portfolio includes pumping sets for fire protection systems. Provide the project, duty point, drive arrangement and required standards and acceptance criteria. Compliance must be checked for the supplied set; standards such as NFPA 20 and NBR 16704 are not certificates issued for the entire company.

Where can I find installation, operation and maintenance instructions for FB Bombas pumps?

It depends on the series. Installation and operation instructions are in FBEI manual MAN001-10 and in FBME service manual MSERV-08/01, which also covers maintenance and recommends supervision authorized by FB Bombas during installation.

The FBE (MTEC-01/01), FBCN (MTEC-03/00) and FBOT (MTEC-16/00) technical manuals provide technical data, sectional drawings, parts lists and dimensions; for installing and maintaining these series, the published services include on-site start-up and commissioning and maintenance contracts. The manuals are on the website’s technical manuals page (PDFs in Portuguese), and MSERV-08/01 is on the FBME series page.

For the operation, identify the series and model from the pump’s nameplate.

What type of mechanical seal do FB Bombas pumps use?

It depends on the series. The FBE can have packing, a mechanical seal, a lip seal or a magnetic coupling; the standard seal is type 21, in ceramic, graphite and Viton, with an AISI 304 stainless-steel spring.

The FBCN uses packing or a mechanical seal, the FBOT combines graphite packing as the first sealing stage with a mechanical seal immersed in the bearing-housing oil, and the FBEI accepts packing or a single, double or cartridge mechanical seal. State the fluid, concentration, temperature and pressure of the process to define the arrangement.

Send your process data to engineering in Cabreúva

Your message goes straight to the factory team.

What happens next

The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.

Application details

Describe the fluid, application and project destination. Include the model and technical data you already have.

Your contact detailsComplete the fields marked as required.

Include the area code. No need to repeat +55.

Fluid, application or model, if you already know it.

Our team replies with the quote or with any questions we still have.