I have a series or model
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
View the catalog
100%Brazilian company
Centrifugal pumps for projects in
Direct service from our factory in Cabreúva, Brazil. Explore FB Bombas series and tell us what your operation needs to transfer or circulate.
Start with your requirements
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
I need to select a pump
Tell us which fluid you need to transfer or circulate and how the pump will be used. You can start the conversation without all the technical details.
Describe my applicationSeries for your process
Selection depends on the fluid and operating conditions. Location identifies the project and delivery destination.
FBCN Series
Centrifugal Pumps
Standardized centrifugal pumps for industrial processes. Compare curves, nozzles and dimensions to select a model.
Explore models
FBME Series
Multistage Centrifugal Pumps
Horizontal construction with multiple stages for pressure elevation. Consult curves, sizes and technical documentation.
Explore models
FBOT Series
Thermal Oil Pumps
Pumps for thermal oil circulation in industrial heating systems. Consult the series operating conditions.
Explore modelsInformation for your project
Application context and points to confirm during technical and commercial review.
Initial guidance
For projects in Brotas, São Paulo, FB Bombas provides service from its factory in Cabreúva, Brazil. Review FBCN for industrial processes, FBME for multistage configurations and FBOT for thermal oil circulation. Selection depends on fluid, flow, head and installation conditions. Check the model curve and documentation with the team.
Industrial context
Describe your plant activity and the pump’s role in the process: transfer, circulation or feed. The team combines this information with fluid and installation data to guide the review of product families.
For industrial projects in Brotas, FB Bombas provides direct service from its factory in Cabreúva, Brazil. A pump manufacturer since 1944, the company reviews the process, fluid and installation conditions with your team to define the equipment.
Delivery planning for Brotas needs the full address and plant access restrictions. Surrounding roads help locate the project, but the cargo route, carrier and timing must be confirmed when contracting transport.
State whether the requirement is an expansion, new installation or equipment replacement. For replacement, pump identification and its dimensional drawing help check the duty point and existing interfaces.
Technical criteria
For centrifugal pumps in Brotas, check the model curve at the proposed speed and impeller diameter. Flow and head duty, suction conditions, fluid and installation interfaces need to be reviewed together before confirming the equipment.
To define materials for the project in Brotas, provide fluid composition, concentration, temperature and solids content. Also describe the external environment; the city name does not establish chemical compatibility or determine pump material.
The project location in Brotas does not determine the pump series. Compare families by fluid and process, then confirm selection using flow, pressure or head, temperature, viscosity and installation conditions.
Support for Brotas starts through the factory channels in Cabreúva, Brazil. Have the equipment identification and a description of operating conditions ready to support maintenance, spare-parts or replacement review.
Applications and operation
For economic context, IBGE records GDP of R$ 1.6 billion for Brotas in 2023. In the 2021 gross value added breakdown, industry accounts for approximately 27.9% and agriculture for approximately 10.9%. Reference years differ because the 2022–2023 publication does not include a sector breakdown. These data describe the municipality; pumping requirements need to be specified for your plant’s process.
To organize supply for Brotas, state the number of pumps and each assembly’s role in the plant. Identify the duty points and operating schedule of each circuit, including the intended conditions for standby equipment.
To describe the industrial application in Brotas, identify the process stage and whether the pump will transfer, circulate or feed another item of equipment. The same plant may have circuits with different fluid, flow, pressure and duty requirements.
If the operation in Brotas uses different fluids, record composition, viscosity, temperature and solids content separately for each circuit. Compatibility with one product does not establish that the pump will serve every other plant process.
Source: IBGE — Municipal GDP and methodologySupply and service
- Reference distance
About 150 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
How the distance is calculated
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026. The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentation
The project destination in Brotas should be included in the quotation with the delivery address and access conditions. Route and transit time are confirmed for the cargo and selected carrier; distance between cities does not replace that planning.
Service for Brotas starts through the factory channels in Cabreúva, Brazil. Describe the need and equipment. Site visits, commissioning or field service depend on scope review, scheduling and commercial conditions.
Send your requirements
To review the FBCN / FBME / FBOT families for the project in Brotas, send the fluid and any known flow, pressure or head and temperature data. For replacement, add the installed pump’s identification and drawing. The team confirms the configuration and proposal scope.
Understand your application
Review process criteria and prepare the information for equipment selection.
Pumps for Sanitation, Water Treatment and Sewerage: Technical Guide for Brazilian Water Utilities
Centrifugal pump selection for raw water intake, treated water pumping, boosters, lift stations and water and wastewater treatment processes: fluid and solids, materials, sealing arrangements, NPSH and the documented limits of the FBCN line — and where the right technology is a different one.
View applicationPumps for Chemical and Pharmaceutical Industry: Selection Guide by Material and Fluid Family
Pump selection for acids, caustic bases, organic solvents, polymers, intermediates and pharmaceutical plant utilities — criteria for material, sealing, classified areas and the boundary between chemical service and sanitary product contact.
View applicationPumps for HVAC, Building Pressurization and Water Supply: Technical Guide for Commercial Buildings and Hospitals
Chilled water, condenser water, transfer and boosting have different demands. Organise thermal load, flow, head, water quality and controls to assess FBCN against actual building conditions.
View applicationBoiler Feed Water and Industrial Hot Water Pump: Condensate Return and HVAC
How to select the boiler feed water pump (feed and condensate return) and the hot water pump for cooling towers, building HVAC, sanitary hot water and solar heating: the three limits that must be checked separately — the pump, the sealing and the system NPSH — and what the FBCN and FBME series manuals document for each.
View applicationFrom requirements to a technical proposal
Share what you already know. Additional details can be clarified with the team during review.
Fluid and process
What needs to be pumped, where it comes from and where it needs to go.
Operating conditions
Flow, pressure or head, temperature and operating schedule, when known.
Equipment and installation
Series, model, identification and space or connection constraints, if a pump is already installed.
Destination and supply
Project location, requested scope and documents required for your purchase.
Direct service from the factory
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together CNC machining, assembly and a hydraulic test bench. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasReview the documentation
Use the family documentation and application guides to prepare your request.
Technical manuals
Installation, operation and maintenance by series, with the document language identified.
Application guides
Understand the process information needed to specify the equipment.
View applicationsMore on industrial pumps in Brotas
See the other pages for this city and for other cities. Service is provided by the factory in Cabreúva, Brazil.
In the same region
Questions about our service
Information to help you prepare your inquiry to FB Bombas.
How do I contact FB Bombas’ technical team?
Use WhatsApp +55 11 97287-4837, telephone +55 11 4898-9200, comercial@fbbombas.com.br or the website form. To help the team, describe the application, project destination and any pump data already available.
Up to what viscosity can FBE pumps operate?
It depends on the size. According to Table 2 of manual MTEC-01/01, the maximum is 2,500 SSU for sizes 1/8" to 1/4", 7,500 SSU for 3/8" to 1", 50,000 SSU for 1.1/2" to 2" and 100,000 SSU for 3" to 6". Speed decreases as viscosity rises: the drive is direct up to 7,500 SSU and, above that, by pulley or gear reducer, down to 150 rpm in the 50,000 to 100,000 SSU range. State the viscosity of the fluid for the project in Brotas at start-up and operating temperatures so that engineering can confirm size and speed.
What is the advantage of buying from a national manufacturer like FB Bombas?
FB Bombas serves projects in Brotas from its Cabreúva-SP factory, with direct engineering support and parts supply for its equipment. Availability, lead time, transport and on-site service are assessed according to the request. Its industrial pump manufacturing history began in 1944.
What is the hydrostatic test pressure of FB pumps?
It depends on the series, as set out in each manual: 10 kgf/cm² for the FBE (MTEC-01/01, Table 5), 1.5 times the operating pressure for the FBOT (MTEC-16/00), 1.5 times the working pressure for the FBME (MTEC-08/01) and per ANSI B73.1 for the FBCN (MTEC-03/00). The test is performed on the factory bench in Cabreúva, Brazil; certificates, additional tests and customer witnessing are defined in the proposal for supply to Brotas.
Does FB Bombas retrofit older pumps?
By replacement, not refurbishment. FB Bombas replaces the old pump with a new, complete FB pump manufactured in Cabreúva, Brazil. Before the order, engineering assesses the installation and issues a data sheet and dimensional drawing; the drawing confirms whether the existing baseplate and piping can be kept or need adaptation. FB does not refurbish other manufacturers’ pumps, sell third-party parts or reuse the installed casing. For FB pumps in service, it supplies original parts and maintenance contracts.
Is FB Bombas a national alternative to imported manufacturers in Brotas?
FB Bombas is a Brazilian manufacturer with direct service from its factory in Cabreúva. To compare an alternative for the project in Brotas, check performance, materials, dimensions, documentation and commercial conditions. Brazilian origin alone does not guarantee lower cost, shorter lead time or technical equivalence.
What certifications does FB Bombas hold?
FB Bombas reports a registration in the Petrobras supplier registry (CRC, formerly CRCC). It is a supplier registration, not a product certification; validity and supply families appear on the current certificate, provided on request. Technical standards depend on the series: mechanical construction per ASME B73.1 for the FBCN, NFPA 20 or ABNT NBR 16704 for FBFS fire pump sets when the project requires it, and API 610 for engineered-to-order projects. These bodies publish standards; they do not certify the company. Tests and certificates for each supply are defined in the proposal.
How long has FB Bombas been in the market?
FB Bombas began manufacturing industrial pumps in 1944. Its current factory is in Cabreúva, Brazil. The Our History page presents the company’s development; each series’ technical documentation supports equipment evaluation for your project in Brotas.
Which pump does FB recommend for water and utilities in Brotas?
The FBCN, a standardized centrifugal pump for clean or turbid liquids, with a series range of up to 2,200 m³/h and 135 m; when a higher head is required, the multistage FBME reaches 300 m. Each model has its own limits in the manual tables. For the project in Brotas, state the fluid and the flow and head duty point; selection checks the model curve, suction conditions, materials, drive and installation interfaces.
How do I request urgent spare parts for Brotas?
With the pump and part identification. State the pump model and identification, the part as shown in the parts list of the series manual, the urgency and the destination in Brotas; the team checks availability and confirms service and transport options. There is no published universal parts lead time or automatic guarantee of consignment stock. To reduce downtime, the FBEI (MAN001-10) and FBME (MSERV-08/01) manuals include the list of spare parts for two years of operation.
Tell us about your project
Send your application to our factory team. You do not need every parameter defined to start the conversation.
Talk to usMon–Fri 8 a.m.–5 p.m.
What happens next
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Your industrial requirements
Describe the fluid, application and project destination. Include the model and technical data you already have.