Skip to main content

Industrial pumps for projects in Agudos do Sul, Paraná

Direct service from our factory in Cabreúva, Brazil. Explore FB Bombas series and tell us what your operation needs to transfer or circulate.

Known series or pump to be selected

Do you already know the pump or need help defining it? Choose the next step for your industrial project.

I have a series or model

Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.

Industrial pump catalog

I need to select a pump

Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.

Describe my application

Information for your project

Application context and points to confirm during technical and commercial review.

Initial guidance

For projects in Agudos do Sul, Paraná, FB Bombas works directly from its factory. Review the industrial pump families and describe the fluid, process and operating conditions. If a pump is already installed, its model and identification help the review. Series, materials, availability and transport are confirmed for the project.

Industrial context

If the project involves plants in different municipalities, list destinations, equipment and technical requirements by facility. The proposal can then describe each supply scope and its transport and service conditions.

Technical criteria

The project location in Agudos do Sul does not determine the pump series. Compare families by fluid and process, then confirm selection using flow, pressure or head, temperature, viscosity and installation conditions.

In the request for Agudos do Sul, describe the fluid source and destination, operating duty and installation constraints. If a pump is already in use, its model and identification complement process data; they do not replace checking current conditions.

Support for Agudos do Sul starts through the factory channels. Have the equipment identification and a description of operating conditions ready to support maintenance, spare-parts or replacement review.

Applications and operation

For economic context, IBGE records GDP of R$ 279 million for Agudos do Sul in 2023. In the 2021 gross value added breakdown, industry accounts for approximately 6.3% and agriculture for approximately 37%. Reference years differ because the 2022–2023 publication does not include a sector breakdown.

These data describe the municipality; pumping requirements need to be specified for your plant’s process.

To organize supply for Agudos do Sul, state the number of pumps and each assembly’s role in the plant. Identify the duty points and operating schedule of each circuit, including the intended conditions for standby equipment.

To describe the industrial application in Agudos do Sul, identify the process stage and whether the pump will transfer, circulate or feed another item of equipment. The same plant may have circuits with different fluid, flow, pressure and duty requirements.

If the operation in Agudos do Sul uses different fluids, record composition, viscosity, temperature and solids content separately for each circuit. Compatibility with one product does not establish that the pump will serve every other plant process.

Source: IBGE — Municipal GDP and methodology

Supply and service

Reference distance

About 385 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.

How the distance is calculated

Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.

The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.

IBGE Mesh API documentation

Replacement, supply and receiving guidance for this state.

Data for review

Send your application in Agudos do Sul to the factory team with the fluid, duty point and installation data. List the drawings and manuals you require: documentation scope and supply conditions are confirmed in the proposal.

Local industry in numbers

Local units and persons employed in the manufacturing divisions, from largest to smallest.

Industrial profile of Agudos do Sul — 2024
Division (CNAE)Local unitsPersons employed
33 · Maintenance, repair and installation of machinery and equipment633
25 · Manufacture of fabricated metal products, except machinery and equipment617
16 · Manufacture of wood products59
10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils38
31 · Manufacture of furniture47
20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide36
Total manufacturing (section C)3797

8 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.

Source: IBGE, Central Business Register 2024 (table 9528).

Understand your application

Review process criteria and prepare the information for equipment selection.

What to send for a technical proposal

Send what you have. Engineering asks for anything missing during the review.

  1. Fluid and process

    What needs to be pumped, where it comes from and where it needs to go.

  2. Operating conditions

    Flow, pressure or head, temperature and operating schedule, when known.

  3. Equipment and installation

    Series, model, identification and space or connection constraints, if a pump is already installed.

  4. Destination and supply

    Project location, requested scope and documents required for your purchase.

Direct service from the factory

FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.

About FB Bombas

Manuals and guides by series and application

Use the family documentation and application guides to prepare your request.

Technical manuals

Installation, operation and maintenance by series, with the document language identified.

Technical pump manuals

The state page, nearby cities and cities with the same largest division by employment, with the closest number of local units in IBGE’s CEMPRE 2024.

Largest division: repair and installation of machinery

Questions about our service

Information to help you prepare your inquiry to FB Bombas.

Are FB Bombas pumps energy efficient?

It depends on the model and the duty point; there is no single efficiency figure for the brand. The FBCN and FBME characteristic curves show the efficiency of each model and, for stainless-steel impellers with passages up to 15 mm, the FBCN manual deducts 2 or 3 points from the curve efficiency (Table 4).

For the project, compare the absorbed power at the process flow, head and fluid, also considering drive, control and operating duty.

Up to what temperature can FB Bombas pumps operate?

It depends on the series. The published limits are up to 260 °C for the FBCN, 350 °C for the FBOT, 340 °C for the FBEI and 140 °C for the FBME. For the FBE, the 2026 catalogue gives a range of 10 °C to 500 °C; the limit of each configuration depends on materials and sealing.

These are series limits: they do not automatically apply to every model, nor do they necessarily occur together with the other maximums. State the start-up, operating and cleaning temperatures of the process.

How can I check whether an FBCN can replace the centrifugal pump installed in Agudos do Sul?

FB Bombas supplies the complete FBCN and checks, model by model, the dimensions in manual MTEC-03/00 (baseplate, nozzles, flanges and shaft) and the duty point before the order. Mechanical construction follows ASME B73.1 (MTEC-03/00); dimensional interchangeability with the existing pump is not assumed and is confirmed on the drawing.

Send the identification and drawing of the pump installed, with flow, head, fluid, materials and drive.

What type of mechanical seal do FB Bombas pumps use?

It depends on the series. The FBE can have packing, a mechanical seal, a lip seal or a magnetic coupling; the standard seal is type 21, in ceramic, graphite and Viton, with an AISI 304 stainless-steel spring.

The FBCN uses packing or a mechanical seal, the FBOT combines graphite packing as the first sealing stage with a mechanical seal immersed in the bearing-housing oil, and the FBEI accepts packing or a single, double or cartridge mechanical seal. State the fluid, concentration, temperature and pressure of the process to define the arrangement.

What is the warranty on FB Bombas pumps?

Warranty conditions are defined in the proposal and contract and vary with the series, operating conditions and agreement. The manuals state what can void it. Under the FBEI manual (MAN001-10), operating with a different fluid or outside the pump’s data sheets and certified documents without FB Bombas’ written authorization voids the warranty.

Under the FBME service manual (MSERV-08/01), after parts are replaced, the operating and performance warranty applies only with original parts and FB Bombas’ consent. For the project, confirm the conditions in the quotation.

Does FB Bombas retrofit older pumps?

By replacement, not refurbishment. FB Bombas replaces the old pump with a new, complete FB Bombas pump. Before the order, engineering assesses the installation and issues a data sheet and dimensional drawing; the drawing confirms whether the existing baseplate and piping can be kept or need adaptation.

FB Bombas does not refurbish other manufacturers’ pumps, sell third-party parts or reuse the installed casing. For FB Bombas pumps in service, it supplies original parts and maintenance contracts.

Does the cold climate around Agudos do Sul affect pump selection?

It can, especially with viscous fluids. On the FBE, speed and transmission are set by fluid viscosity (Table 2 of manual MTEC-01/01), and the heating chamber is available only on sizes from 1.1/2" to 6".

On the FBEI (MAN001-10), the fluid must be at the proper temperature and viscosity before start-up; the heating jacket must be supplied gradually, with steam up to 185 °C or thermal fluid up to 232 °C, both up to 10 bar. State the minimum site temperatures and the fluid viscosity at start-up and in operation.

Is FB Bombas a national alternative to imported manufacturers in Agudos do Sul?

FB Bombas is a Brazilian manufacturer with direct service from its factory. To compare an alternative for the project, check performance, materials, dimensions, documentation and commercial conditions. Brazilian origin alone does not guarantee lower cost, shorter lead time or technical equivalence.

Does FB Bombas perform on-site technical visits in Agudos do Sul?

Yes, when field service is part of the contracted scope. The services published by FB Bombas include start-up and commissioning and maintenance contracts for FB Bombas lines, and supervision authorized by FB Bombas is recommended during FBME installation (MSERV-08/01). For the project, describe the service needed and the site; service format, schedule and commercial terms are defined in the proposal.

Where can I find installation, operation and maintenance instructions for FB Bombas pumps?

It depends on the series. Installation and operation instructions are in FBEI manual MAN001-10 and in FBME service manual MSERV-08/01, which also covers maintenance and recommends supervision authorized by FB Bombas during installation.

The FBE (MTEC-01/01), FBCN (MTEC-03/00) and FBOT (MTEC-16/00) technical manuals provide technical data, sectional drawings, parts lists and dimensions; for installing and maintaining these series, the published services include on-site start-up and commissioning and maintenance contracts. The manuals are on the website’s technical manuals page (PDFs in Portuguese), and MSERV-08/01 is on the FBME series page.

For the operation, identify the series and model from the pump’s nameplate.

Send your process data to engineering in Cabreúva

Your message goes straight to the factory team.

What happens next

The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.

Application details

Describe the fluid, application and project destination. Include the model and technical data you already have.

Your contact detailsComplete the fields marked as required.

Include the area code. No need to repeat +55.

Fluid, application or model, if you already know it.

Our team replies with the quote or with any questions we still have.