Skip to main content

Known series or pump to be selected

Do you already know the pump or need help defining it? Choose the next step for your industrial project.

I have a series or model

Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.

Industrial pump catalog

I need to select a pump

Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.

Describe my application

Industry in Caaporã

Municipal figures, each with its source and year.

Manufacturing in Caaporã has 38 local units, with an average of 65 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after non-metallic mineral products, the next largest division is repair and installation of machinery, with 10% of manufacturing employment, followed by fabricated metal products, with 5%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 29.0% of the municipality's gross value added; the median across the state's municipalities was 5.2% (IBGE, Municipal GDP).

How the distance is calculated

Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.

The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.

IBGE Mesh API documentation
Replacement, supply and receiving guidance for this state.

Local industry in numbers

Local units and persons employed in the manufacturing divisions, from largest to smallest.

Industrial profile of Caaporã — 2024
Division (CNAE)Local unitsPersons employed
23 · Manufacture of other non-metallic mineral products8257
33 · Maintenance, repair and installation of machinery and equipment11249
25 · Manufacture of fabricated metal products, except machinery and equipment3126
14 · Manufacture of wearing apparel and accessories48
Total manufacturing (section C)382,457

8 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.

Source: IBGE, Central Business Register 2024 (table 9528).

Understand your application

Review process criteria and prepare the information for equipment selection.

What to send for a technical proposal

Send what you have. Engineering asks for anything missing during the review.

  1. Fluid and process

    What needs to be pumped, where it comes from and where it needs to go.

  2. Operating conditions

    Flow, pressure or head, temperature and operating schedule, when known.

  3. Equipment and installation

    Series, model, identification and space or connection constraints, if a pump is already installed.

  4. Destination and supply

    Project location, requested scope and documents required for your purchase.

Direct service from the factory

FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.

About FB Bombas

Manuals and guides by series and application

Use the family documentation and application guides to prepare your request.

Technical manuals

Installation, operation and maintenance by series, with the document language identified.

Technical pump manuals

Questions about our service

Information to help you prepare your inquiry to FB Bombas.

Which manufacturing division employs the most people in Caaporã?

Manufacture of other non-metallic mineral products, with 257 persons employed in 8 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.

How far is Caaporã from the FB Bombas factory?

About 2,180 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.

How long has FB Bombas been in the market?

FB Bombas began manufacturing industrial pumps in 1944. The Our History page presents the company’s development; each series’ technical documentation supports equipment evaluation for your project.

What type of mechanical seal do FB Bombas pumps use?

It depends on the series. The FBE can have packing, a mechanical seal, a lip seal or a magnetic coupling; the standard seal is type 21, in ceramic, graphite and Viton, with an AISI 304 stainless-steel spring.

The FBCN uses packing or a mechanical seal, the FBOT combines graphite packing as the first sealing stage with a mechanical seal immersed in the bearing-housing oil, and the FBEI accepts packing or a single, double or cartridge mechanical seal. State the fluid, concentration, temperature and pressure of the process to define the arrangement.

How is pump sizing performed?

The review considers the fluid, flow, required pressure or head, temperature, viscosity and installation conditions. Provide what you already know and identify any equipment in use. The team checks the necessary data before confirming series, model, drive and materials.

Are FB Bombas pumps energy efficient?

It depends on the model and the duty point; there is no single efficiency figure for the brand. The FBCN and FBME characteristic curves show the efficiency of each model and, for stainless-steel impellers with passages up to 15 mm, the FBCN manual deducts 2 or 3 points from the curve efficiency (Table 4).

For the project, compare the absorbed power at the process flow, head and fluid, also considering drive, control and operating duty.

Send your process data to engineering in Cabreúva

Your message goes straight to the factory team.

What happens next

The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.

Application details

Describe the fluid, application and project destination. Include the model and technical data you already have.

Your contact detailsComplete the fields marked as required.

Include the area code. No need to repeat +55.

Fluid, application or model, if you already know it.

Our team replies with the quote or with any questions we still have.