Skip to main content

Known series or pump to be selected

Do you already know the pump or need help defining it? Choose the next step for your industrial project.

I have a series or model

Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.

Industrial pump catalog

I need to select a pump

Tell us the fluid and what the pump will do: transfer, circulate or feed another unit.

Describe my application

Industry in Juara

Municipal figures, each with its source and year.

Manufacturing in Juara has 220 local units, with an average of 8 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after food products, the next largest division is wood products, with 26% of manufacturing employment, followed by furniture, with 8%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 11.9% of the municipality's gross value added; the median across the state's municipalities was 7.2% (IBGE, Municipal GDP).

How the distance is calculated

Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.

The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.

IBGE Mesh API documentation
Replacement, supply and receiving guidance for this state.

Local industry in numbers

Local units and persons employed in the manufacturing divisions, from largest to smallest.

Industrial profile of Juara — 2024
Division (CNAE)Local unitsPersons employed
10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils32757
16 · Manufacture of wood products61438
31 · Manufacture of furniture26128
25 · Manufacture of fabricated metal products, except machinery and equipment3195
33 · Maintenance, repair and installation of machinery and equipment2482
23 · Manufacture of other non-metallic mineral products2070
29 · Manufacture of motor vehicles, trailers and semi-trailers547
18 · Printing and reproduction of recorded media625
14 · Manufacture of wearing apparel and accessories420
32 · Manufacture of miscellaneous products49
22 · Manufacture of rubber and plastics products36
Total manufacturing (section C)2201,685

3 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.

Source: IBGE, Central Business Register 2024 (table 9528).

Guides tied to this industry

Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.

Understand your application

Review process criteria and prepare the information for equipment selection.

What to send for a technical proposal

Send what you have. Engineering asks for anything missing during the review.

  1. Fluid and process

    What needs to be pumped, where it comes from and where it needs to go.

  2. Operating conditions

    Flow, pressure or head, temperature and operating schedule, when known.

  3. Equipment and installation

    Series, model, identification and space or connection constraints, if a pump is already installed.

  4. Destination and supply

    Project location, requested scope and documents required for your purchase.

Direct service from the factory

FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.

About FB Bombas

Manuals and guides by series and application

Use the family documentation and application guides to prepare your request.

Technical manuals

Installation, operation and maintenance by series, with the document language identified.

Technical pump manuals

Questions about our service

Information to help you prepare your inquiry to FB Bombas.

Which manufacturing division employs the most people in Juara?

Manufacture of food products, with 757 persons employed in 32 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.

How far is Juara from the FB Bombas factory?

About 1,760 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.

Are FB Bombas pumps easy to maintain?

It depends on the series. On the FBCN and FBOT, back pull-out construction allows the bearing-housing assembly to be removed without disconnecting the piping, and the FBEI catalogue also indicates back pull-out construction. The FBE external gear pump is not back pull-out: its shafts are supported on bushings.

Before working on the equipment, check the series manual, the sectional drawing and the parts list.

Up to what temperature can FB Bombas pumps operate?

It depends on the series. The published limits are up to 260 °C for the FBCN, 350 °C for the FBOT, 340 °C for the FBEI and 140 °C for the FBME. For the FBE, the 2026 catalogue gives a range of 10 °C to 500 °C; the limit of each configuration depends on materials and sealing.

These are series limits: they do not automatically apply to every model, nor do they necessarily occur together with the other maximums. State the start-up, operating and cleaning temperatures of the process.

Where can I find installation, operation and maintenance instructions for FB Bombas pumps?

It depends on the series. Installation and operation instructions are in FBEI manual MAN001-10 and in FBME service manual MSERV-08/01, which also covers maintenance and recommends supervision authorized by FB Bombas during installation.

The FBE (MTEC-01/01), FBCN (MTEC-03/00) and FBOT (MTEC-16/00) technical manuals provide technical data, sectional drawings, parts lists and dimensions; for installing and maintaining these series, the published services include on-site start-up and commissioning and maintenance contracts. The manuals are on the website’s technical manuals page (PDFs in Portuguese), and MSERV-08/01 is on the FBME series page.

For the operation, identify the series and model from the pump’s nameplate.

What is the advantage of buying from a national manufacturer like FB Bombas?

FB Bombas serves projects from its factory, with direct engineering support and parts supply for its equipment. Availability, lead time, transport and on-site service are assessed according to the request. Its industrial pump manufacturing history began in 1944.

Send your process data to engineering in Cabreúva

Your message goes straight to the factory team.

What happens next

The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.

Application details

Describe the fluid, application and project destination. Include the model and technical data you already have.

Your contact detailsComplete the fields marked as required.

Include the area code. No need to repeat +55.

Fluid, application or model, if you already know it.

Our team replies with the quote or with any questions we still have.