Manufacture of food products
356 persons employed
Guide to syrups, molasses and vegetable oilsThe leather and footwear division employs 2,932 people, 61% of manufacturing employment in the municipality (IBGE, CEMPRE 2024).
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
Industrial pump catalogTell us the fluid and what the pump will do: transfer, circulate or feed another unit.
Describe my applicationMunicipal figures, each with its source and year.
Manufacturing in Crato has 252 local units, with an average of 19 persons employed per unit (IBGE, CEMPRE 2024). Among divisions with published values, after leather and footwear, the next largest division is non-metallic mineral products, with 13% of manufacturing employment, followed by food products, with 7%. In 2021, industry in the broad sense, including extraction, construction, energy and sanitation, accounted for 11.3% of the municipality's gross value added; the median across the state's municipalities was 4.8% (IBGE, Municipal GDP).
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026.
The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentationLocal units and persons employed in the manufacturing divisions, from largest to smallest.
| Division (CNAE) | Local units | Persons employed |
|---|---|---|
| 15 · Preparation of leather and manufacture of leather goods, travel goods and footwear | 15 | 2,932 |
| 23 · Manufacture of other non-metallic mineral products | 42 | 640 |
| 10 · Manufacture of food productsGuide to syrups, molasses and vegetable oils | 57 | 356 |
| 25 · Manufacture of fabricated metal products, except machinery and equipment | 31 | 207 |
| 24 · Metallurgy | 6 | 118 |
| 11 · Manufacture of beverages | 8 | 63 |
| 18 · Printing and reproduction of recorded media | 13 | 63 |
| 22 · Manufacture of rubber and plastics products | 12 | 38 |
| 33 · Maintenance, repair and installation of machinery and equipment | 13 | 32 |
| 14 · Manufacture of wearing apparel and accessories | 14 | 23 |
| 31 · Manufacture of furniture | 7 | 21 |
| 20 · Manufacture of chemicals and chemical productsChemical and pharmaceutical process guide | 5 | 17 |
| 16 · Manufacture of wood products | 6 | 14 |
| 32 · Manufacture of miscellaneous products | 13 | 11 |
| Total manufacturing (section C) | 252 | 4,789 |
6 divisions are marked X, a value suppressed to protect the respondent's identity; they are excluded from the ranking.
Divisions with the most persons employed that have an application guide on the site. The list is editorial navigation: it does not say what is pumped in the municipality.
356 persons employed
Guide to syrups, molasses and vegetable oilsSelection depends on the fluid and operating conditions. Location identifies the project and delivery destination.

External gear pumps for viscous fluids. From 1/8″ to 4″, in stock in every configuration: ask our team for availability and pricing.
View the models
Internal gear pumps for viscous fluid transfer. Review the configuration, materials and series documentation.
View the models
Standardized centrifugal pumps for industrial processes. Compare curves, nozzles and dimensions to select a model.
View the models
Horizontal construction with multiple stages for pressure elevation. Consult curves, sizes and technical documentation.
View the models
Pumps for thermal oil circulation in industrial heating systems. Consult the series operating conditions.
View the models
Pumping sets for fire protection systems. Review available configurations and the scope of supply.
View the models
Skids, mobile sets and custom solutions. Send your process requirements for engineering review.
View the modelsReview process criteria and prepare the information for equipment selection.
Centrifugal pump selection for raw water intake, treated water pumping, boosters, lift stations and water and wastewater treatment processes: fluid and solids, materials, sealing arrangements, NPSH and the documented limits of the FBCN line — and where the right technology is a different one.
Pump selection for acids, caustic bases, organic solvents, polymers, intermediates and pharmaceutical plant utilities — criteria for material, sealing, classified areas and the boundary between chemical service and sanitary product contact.
Pump selection for diesel S10, gasoline C, jet fuel (QAV-1), heavy fuel oil and refinery utilities — NPSH in volatile products, classified areas and Ex certification, sealing and the FB Bombas service scope.
Chilled water, condenser water, transfer and boosting have different demands. Organise thermal load, flow, head, water quality and controls to assess FBCN against actual building conditions.
Send what you have. Engineering asks for anything missing during the review.
What needs to be pumped, where it comes from and where it needs to go.
Flow, pressure or head, temperature and operating schedule, when known.
Series, model, identification and space or connection constraints, if a pump is already installed.
Project location, requested scope and documents required for your purchase.
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together application engineering and design, CNC machining and assembly. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasUse the family documentation and application guides to prepare your request.
Installation, operation and maintenance by series, with the document language identified.
Technical pump manualsUnderstand the process information needed to specify the equipment.
Industrial pump applicationsThe state page, nearby cities and cities with the same largest division by employment, with the closest number of local units in IBGE’s CEMPRE 2024.
Information to help you prepare your inquiry to FB Bombas.
Preparation of leather and manufacture of leather goods, travel goods and footwear, with 2,932 persons employed in 15 local units, according to IBGE's 2024 Central Business Register (CEMPRE), among divisions with published values; the table on this page lists the other divisions.
About 1,955 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
Manual MTEC-03/00 does not state that compliance: it states FBCN mechanical construction per ASME B73.1, not its dimensions. So, before a replacement, interchangeability with the existing pump is checked on each model’s drawing, together with the duty point, materials and drive.
It depends on the series. The FBE can have packing, a mechanical seal, a lip seal or a magnetic coupling; the standard seal is type 21, in ceramic, graphite and Viton, with an AISI 304 stainless-steel spring.
The FBCN uses packing or a mechanical seal, the FBOT combines graphite packing as the first sealing stage with a mechanical seal immersed in the bearing-housing oil, and the FBEI accepts packing or a single, double or cartridge mechanical seal. State the fluid, concentration, temperature and pressure of the process to define the arrangement.
Yes, once equivalence has been confirmed. FB Bombas replaces the installed pump with a complete FB Bombas pump and, before the order, assesses the installation and sends a data sheet and dimensional drawing.
For the installation, send the identification and drawing of the current pump, with its duty point, fluid, materials and drive; origin or a similar designation does not guarantee direct replacement.
The review considers the fluid, flow, required pressure or head, temperature, viscosity and installation conditions. Provide what you already know and identify any equipment in use. The team checks the necessary data before confirming series, model, drive and materials.
Your message goes straight to the factory team.
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Describe the fluid, application and project destination. Include the model and technical data you already have.