Does FB Bombas serve cities neighboring Santana do Mundaú?
Yes. FB Bombas has a single factory and serves projects in other cities through its channels. Provide each project location and required scope to confirm supply and transport conditions.
Which pump does FB Bombas recommend for water and utilities in Santana do Mundaú?
The FBCN, a standardized centrifugal pump for clean or turbid liquids, with a series range of up to 2,200 m³/h and 135 m; when a higher head is required, the multistage FBME reaches 300 m. Each model has its own limits in the manual tables.
For the project, state the fluid and the flow and head duty point; selection checks the model curve, suction conditions, materials, drive and installation interfaces.
Is it possible to replace an imported pump with an FB Bombas pump?
Yes, once equivalence has been confirmed. FB Bombas replaces the installed pump with a complete FB Bombas pump and, before the order, assesses the installation and sends a data sheet and dimensional drawing.
For the installation, send the identification and drawing of the current pump, with its duty point, fluid, materials and drive; origin or a similar designation does not guarantee direct replacement.
How can gear pumps be evaluated for a project in Santana do Mundaú?
Review FBE and FBEI to assess viscous-fluid transfer in your operation. Provide the fluid, viscosity at startup and operating temperatures, and flow and pressure requirements. Size, speed, sealing and any heating depend on the documented configuration.
How can pump delivery to Santana do Mundaú be planned?
The proposal should define availability, dispatch, transport, packaging and responsibilities for delivery. State access, unloading and receiving restrictions. Route, mode and timing are confirmed for the supply; a reference distance is not a road route or delivery time.
Up to what viscosity can FBE pumps operate?
It depends on the size. The FBE manual (MTEC-01/01, Table 2) limits viscosity by connection size: 2,500 SSU for sizes 1/8" to 1/4", 7,500 SSU for 3/8" to 1", 50,000 SSU for 1.1/2" to 2" and 100,000 SSU for 3" to 6".
Speed decreases as viscosity rises: the drive is direct up to 7,500 SSU and, above that, by pulley or gear reducer, down to 150 rpm in the 50,000 to 100,000 SSU range. State the viscosity of the fluid for the project at start-up and operating temperatures to confirm size and speed.
Are FB Bombas pumps delivered to Santana do Mundaú with a traceable Data Book?
When the Data Book is part of the purchase scope. State which drawings and manuals are required; the proposal confirms the documents applicable to the supplied series and configuration. The same Data Book is not assumed for every pump.
How do I request urgent spare parts for Santana do Mundaú?
With the pump and part identification. State the pump model and identification, the part as shown in the parts list of the series manual, the urgency and the destination; the team checks availability and confirms service and transport options. There is no published universal parts lead time or automatic guarantee of consignment stock.
To reduce downtime, the FBEI (MAN001-10) and FBME (MSERV-08/01) manuals include the list of spare parts for two years of operation.
Up to what temperature can FB Bombas pumps operate?
It depends on the series. The published limits are up to 260 °C for the FBCN, 350 °C for the FBOT, 340 °C for the FBEI and 140 °C for the FBME. For the FBE, the 2026 catalogue gives a range of 10 °C to 500 °C; the limit of each configuration depends on materials and sealing.
These are series limits: they do not automatically apply to every model, nor do they necessarily occur together with the other maximums. State the start-up, operating and cleaning temperatures of the process.
Where can I find installation, operation and maintenance instructions for FB Bombas pumps?
It depends on the series. Installation and operation instructions are in FBEI manual MAN001-10 and in FBME service manual MSERV-08/01, which also covers maintenance and recommends supervision authorized by FB Bombas during installation.
The FBE (MTEC-01/01), FBCN (MTEC-03/00) and FBOT (MTEC-16/00) technical manuals provide technical data, sectional drawings, parts lists and dimensions; for installing and maintaining these series, the published services include on-site start-up and commissioning and maintenance contracts. The manuals are on the website’s technical manuals page (PDFs in Portuguese), and MSERV-08/01 is on the FBME series page.
For the operation, identify the series and model from the pump’s nameplate.