Technical summary
The FBOT (normalized centrifugal) line is specified in Descalvado, São Paulo for cerâmica — head up to 135 m, temperature up to 260°C. ASME B73.1, in-house manufacturing in Cabreúva-SP (164 km).
FBCN Centrifugal Pumps
FBCN Centrifugal Pumps in Descalvado
Service to Descalvado is coordinated from the Cabreúva-SP factory, route SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) (164 km), with a technical team for selection, commissioning and replacement support. Descalvado sits 58 km from the sugar-and-ethanol cluster centered in Araraquara, a proximity that usually means shared suppliers and aligned maintenance standards. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Descalvado, São Paulo with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. FB Bombas maintains an installed base in Descalvado with a structure of spare parts (impeller, shaft, wear ring, cartridge mechanical seal, bearings) and scheduled preventive maintenance, with direct supply from the Cabreúva-SP factory. Membership in the Araraquara mesoregion (IBGE) places Descalvado in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. The barbotina and água profile observed in Descalvado maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. The SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) corridor combined with highways SP-300, SP-021, SP-330, BR-116 and BR-374 composes the freight mesh to Descalvado — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. For projects in Descalvado that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Descalvado's industrial profile centers on Cerâmica and Avicultura — sectors with specific pumping demands that FB Bombas meets with dedicated product series.
Nationwide Service
159km from factory
FBCN Centrifugal Pumps|Desde 1944
Service to Descalvado is coordinated from the Cabreúva-SP factory, route SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) (164 km), with a technical team for selection, commissioning and replacement support. Descalvado sits 58 km from the sugar-and-ethanol cluster centered in Araraquara, a proximity that usually means shared suppliers and aligned maintenance standards. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Descalvado, São Paulo with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. FB Bombas maintains an installed base in Descalvado with a structure of spare parts (impeller, shaft, wear ring, cartridge mechanical seal, bearings) and scheduled preventive maintenance, with direct supply from the Cabreúva-SP factory. Membership in the Araraquara mesoregion (IBGE) places Descalvado in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. The barbotina and água profile observed in Descalvado maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. The SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) corridor combined with highways SP-300, SP-021, SP-330, BR-116 and BR-374 composes the freight mesh to Descalvado — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. For projects in Descalvado that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Descalvado's industrial profile centers on Cerâmica and Avicultura — sectors with specific pumping demands that FB Bombas meets with dedicated product series.
Coverage
Nationwide Service
Distance
159km from factory
80+
Years
API
Compliant
100%
Tested
80+
Years in Market
CRCC
Petrobras Approved
27
States Served
API 610/676
Certified Pumps
Technical summary
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBCN Centrifugal Pumps Industrial in Descalvado
Local context
Service to Descalvado is coordinated from the Cabreúva-SP factory, route SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) (164 km), with a technical team for selection, commissioning and replacement support. Descalvado sits 58 km from the sugar-and-ethanol cluster centered in Araraquara, a proximity that usually means shared suppliers and aligned maintenance standards. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Descalvado, São Paulo with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. FB Bombas maintains an installed base in Descalvado with a structure of spare parts (impeller, shaft, wear ring, cartridge mechanical seal, bearings) and scheduled preventive maintenance, with direct supply from the Cabreúva-SP factory. Membership in the Araraquara mesoregion (IBGE) places Descalvado in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. The barbotina and água profile observed in Descalvado maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. The SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) corridor combined with highways SP-300, SP-021, SP-330, BR-116 and BR-374 composes the freight mesh to Descalvado — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. For projects in Descalvado that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Descalvado's industrial profile centers on Cerâmica and Avicultura — sectors with specific pumping demands that FB Bombas meets with dedicated product series.
Technical solutions
Lead time for critical parts to Descalvado is typically 24-48h — a function of distance (164 km) and the available road modal. In Descalvado, alimentação de prensas form the typical-use portfolio — guiding series selection, sealing configuration and internal coating according to fluid abrasiveness or aggressiveness. The technical profile of the sucroalcooleiro cluster near Descalvado involves sugarcane juice, vinasse, molasses and thermal oil for evaporators — 24/7 operation during harvest — information that guides preliminary sizing of FB series. In Descalvado, FBOT cover the technical range observed in the field — from primary transfer and circulation to replacing an installed pump carrying the same ASME B73.1 dimensional designation. For barbotina and água, the materials recommendation in Descalvado converges on cast iron with proper coating or stainless steels when the fluid requires, a starting point adjustable based on field-observed corrosion. In utilities and continuous process in Descalvado, the standardized centrifugal standardizes the fleet: 53 models with bench-tested curves cover the flow × head grid, and the same construction philosophy simplifies spares inventory across sizes — fewer critical items, more availability.
Why FB Bombas
The demand profile in Descalvado reflects medium density — regular and predictable opportunity pipeline. With a GDP of R$ 2.6 billion (IBGE, 2023) and industry accounting for 34.6% of value added (2021), Descalvado combines productive plants with a strong services sector — the typical mix demanding utility centrifugals and process pumps in parallel. Fluid-roster complexity in Descalvado is low — lean fluid roster — technical operation focused on few main vectors. Typical seasonality of the sucroalcooleiro cluster (concentrated harvest season (Apr-Nov) creates short maintenance windows and intense parts demand during milling) directly impacts supply scheduling and PMs in Descalvado. In Descalvado, cerâmica plants concentrate recurring demand for centrifugal pumps for utilities and positive-displacement pumps for viscous fluids. Due to proximity to the sucroalcooleiro cluster, Descalvado shares a technical agenda with juice circulation, molasses transfer, vinasse boost and thermal oil for evaporators — a direct path to series and materials selection. Descalvado is part of an active operational neighborhood, with maintenance and replacement flows that benefit from optimized regional logistics. In Descalvado, series FBOT for alimentação de prensas — a combination that covers the typical local industrial demand. Working with barbotina and água in Descalvado demands attention to viscosity at operating temperature, residual abrasiveness and chemical compatibility — criteria FB engineering applies on every project.
Logistics & support
164 km separate the Cabreúva-SP factory from Descalvado via SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) — an axis sized for movement of pumps, skids and pump-and-motor sets. Alternative routing to Descalvado can use SP-300, SP-021, SP-330, BR-116 and BR-374, which helps in heavy-traffic situations or maintenance on specific roads. Logistics lead time to Descalvado is 12-24h via direct road modal — variable with cargo type, season and specific optimizations. The factory-to-Descalvado logistics cycle begins with documented dispatch: invoice, packing list, test certificates and the equipment's technical manual. The technical-service model in Descalvado is structured as in-person technical visits with rapid mobilization — Cabreúva → customer route in a few hours.
Request your proposal
FB engineers serve Descalvado for the FBCN series with a sized proposal — duty point, fluid, field conditions and supply lead time.
Talk to engineeringWhy FB Bombas
National leadership in industrial pumping
For over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Brazil Differentiators
Advantages for your Industrial Operation
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Complete National Coverage
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Brazil-Wide Logistics
Nationwide deliveries through partner carrier network with optimized lead times.
Dedicated Engineering
Technical team available for sizing, project work and after-sales support across any region.
Strategic Stock
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Discover FB Bombas
Own factory in Cabreúva/SP with full production capability, serving Descalvado and all of Brazil
Own Manufacturing
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
Custom Projects
We size and build complete systems, ready for installation at your industrial plant.
Replacement Parts
We keep original parts in stock for all series, ensuring continuity of your operation.
Industrial Production
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Descalvado and the entire São Paulo region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteOur Product Line
Four catalog series, fire-fighting systems and engineered-to-order — in-house manufacturing and hydrostatic testing on 100% of pumps
Need a Custom Solution?
Our technical team is ready to develop the ideal solution for your application
Contact Us
Industrial Capacity
Production line dedicated to industrial pumps
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
350°C
Max. Temp. FBOT
1,350 l/min
Max. Flow FBE (standard line)
2,200 m³/h
Max. Flow FBCN
Companies that Trust FB Bombas
Present in the largest industrial projects in Brazil and Latin America
Explore by pump type
See specific solutions for Descalvado
Industrial Applications Served
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Pumps for Sanitation, Water Treatment and Sewerage: Technical Guide for Brazilian Water Utilities
Read technical guide
Pumps for Chemical and Pharmaceutical Industry: Selection Guide by Material and Fluid Family
Read technical guide
Pumps for HVAC, Building Pressurization and Water Supply: Technical Guide for Commercial Buildings and Hospitals
Read technical guide
Industrial and Building Hot Water Pumps: HVAC, Boiler, Sanitary and Solar Heating
Read technical guide
Centrifugal Pumps in Nearby Cities
Regional service from Descalvado — same series, same factory in Cabreúva/SP.
Frequently Asked Questions about Descalvado
Does FB Bombas offer FAT and SAT support for projects in Descalvado?
Does FB Bombas offer FAT and SAT support for projects in Descalvado?
It offers both. The FAT (Factory Acceptance Test) takes place on the Cabreúva/SP bench and covers hydraulic testing, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration; when the customer specifies, inspection witnesses the tests. In the SAT (Site Acceptance Test) of Descalvado projects, application engineering supports commissioning with startup checklist, laser alignment and capture of the baseline vibration signature.
What is the emergency spare-parts lead time to Descalvado?
What is the emergency spare-parts lead time to Descalvado?
During a plant shutdown in Descalvado, critical parts — mechanical seal, impeller, shaft, wear ring, bearings — enter FB Bombas' emergency flow: pre-invoicing, priority dispatch and choice of alternative modal (express road or air, depending on distance and criticality). Typical lead time depends on the region and the window is negotiated case by case. Customers with an installed base and scheduled PM can keep part of the stock on consignment at the plant.
How long has FB Bombas been in the market?
How long has FB Bombas been in the market?
Since 1944 — over 82 years of continuous experience manufacturing industrial pumps. In Cabreúva/SP, the factory brings engineering, manufacturing and testing together under one roof, which assures total quality control on each unit shipped to Descalvado and all across Brazil.
How do I contact FB Bombas’ technical team?
How do I contact FB Bombas’ technical team?
You can reach us on WhatsApp at +55 11 97287-4837, write to comercial@fbbombas.com.br or fill in the website form. Technical requests receive prioritized feedback within the same business day, coming straight from application engineering.
What is the advantage of Descalvado being close to the FB Bombas factory?
What is the advantage of Descalvado being close to the FB Bombas factory?
The 164 km distance via SP-300 Rodovia Marechal Rondon (via Rodoanel SP-021) shortens everything: more economical freight, faster delivery and easier on-site technical visits for critical projects. During maintenance shutdowns, proximity to Cabreúva/SP cuts the time between the call and the part on site.
Is it possible to replace an imported pump with an FB Bombas pump?
Is it possible to replace an imported pump with an FB Bombas pump?
Yes. FB Bombas’ application engineering analyzes the installed pump specifications (flow, pressure, viscosity, temperature) and proposes dimensional or functional technical equivalence with one of our series. Many clients in Descalvado have already made this replacement with gains in lead time, cost and local support.
Does FB Bombas manufacture custom pumps?
Does FB Bombas manufacture custom pumps?
Yes — the standard catalog is only the starting point. For special applications, FB Bombas engineers custom solutions: changes in construction materials, sealing arrangements, integrated heating systems, skids, mobile assemblies and retrofit of existing installations. Before manufacturing, every special project is validated by engineering.
What certifications does FB Bombas hold?
What certifications does FB Bombas hold?
Credentials include an active Petrobras CRCC, API 676 compliance on the FBE gear line, ASME B73.1 compliance on the FBCN centrifugal and adherence to NFPA 20 and NBR 16704 on fire-fighting systems. Technical documentation and data book accompany supplies upon requirement.
Does FB Bombas perform on-site technical visits in Descalvado?
Does FB Bombas perform on-site technical visits in Descalvado?
Yes. For projects in Descalvado, on-site technical visits by application engineers can be scheduled for process data collection, diagnosis of existing installations and commissioning support. Geographic proximity makes this operation agile and recurring.
Do FBCN pumps follow ASME B73.1 dimensional compliance?
Do FBCN pumps follow ASME B73.1 dimensional compliance?
They do. The FBCN series dimensionally meets ASME B73.1, the North American standard for horizontal end-suction process centrifugal pumps. In practice, a Descalvado plant running a normalized pump of the same designation achieves retrofit on the already-installed baseplate: since shaft dimensions, suction/discharge flanges, casing feet and impeller centerline follow the same standard, the FBCN pump takes the place of the previous one — piping and baseplate stay intact. Hydraulic equivalence (Q×H and NPSH) is checked separately, on the data sheet.
Need gear or centrifugal pumps in Descalvado?
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
Talk to usMon–Fri 8 a.m.–5 p.m.