I have a series or model
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
View the catalog
100%Brazilian company
Centrifugal pumps for projects in
Direct service from our factory in Cabreúva, Brazil. Explore FB Bombas series and tell us what your operation needs to transfer or circulate.
Start with your requirements
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
I need to select a pump
Tell us which fluid you need to transfer or circulate and how the pump will be used. You can start the conversation without all the technical details.
Describe my applicationSeries for your process
Selection depends on the fluid and operating conditions. Location identifies the project and delivery destination.
FBCN Series
Centrifugal Pumps
Standardized centrifugal pumps for industrial processes. Compare curves, nozzles and dimensions to select a model.
Explore models
FBME Series
Multistage Centrifugal Pumps
Horizontal construction with multiple stages for pressure elevation. Consult curves, sizes and technical documentation.
Explore models
FBOT Series
Thermal Oil Pumps
Pumps for thermal oil circulation in industrial heating systems. Consult the series operating conditions.
Explore modelsInformation for your project
Application context and points to confirm during technical and commercial review.
Initial guidance
For projects in Alto do Rodrigues, Rio Grande do Norte, FB Bombas provides service from its factory in Cabreúva, Brazil. Review FBCN for industrial processes, FBME for multistage configurations and FBOT for thermal oil circulation. Selection depends on fluid, flow, head and installation conditions. Check the model curve and documentation with the team.
Industrial context
Describe your plant activity and the pump’s role in the process: transfer, circulation or feed. The team combines this information with fluid and installation data to guide the review of product families.
Identify the fluid by its trade name and available composition. Add viscosity at operating temperature, solids content and startup conditions. These data allow materials and sealing to be assessed before the configuration is confirmed.
Delivery planning for Alto do Rodrigues needs the full address and plant access restrictions. Surrounding roads help locate the project, but the cargo route, carrier and timing must be confirmed when contracting transport.
State whether the requirement is an expansion, new installation or equipment replacement. For replacement, pump identification and its dimensional drawing help check the duty point and existing interfaces.
Technical criteria
For centrifugal pumps in Alto do Rodrigues, check the model curve at the proposed speed and impeller diameter. Flow and head duty, suction conditions, fluid and installation interfaces need to be reviewed together before confirming the equipment.
The project location in Alto do Rodrigues does not determine the pump series. Compare families by fluid and process, then confirm selection using flow, pressure or head, temperature, viscosity and installation conditions.
In the request for Alto do Rodrigues, describe the fluid source and destination, operating duty and installation constraints. If a pump is already in use, its model and identification complement process data; they do not replace checking current conditions.
Support for Alto do Rodrigues starts through the factory channels in Cabreúva, Brazil. Have the equipment identification and a description of operating conditions ready to support maintenance, spare-parts or replacement review.
Applications and operation
For economic context, IBGE records GDP of R$ 903 million for Alto do Rodrigues in 2023. In the 2021 gross value added breakdown, industry accounts for approximately 52.8% and agriculture for approximately 3.7%. Reference years differ because the 2022–2023 publication does not include a sector breakdown. These data describe the municipality; pumping requirements need to be specified for your plant’s process.
To organize supply for Alto do Rodrigues, state the number of pumps and each assembly’s role in the plant. Identify the duty points and operating schedule of each circuit, including the intended conditions for standby equipment.
To describe the industrial application in Alto do Rodrigues, identify the process stage and whether the pump will transfer, circulate or feed another item of equipment. The same plant may have circuits with different fluid, flow, pressure and duty requirements.
If the operation in Alto do Rodrigues uses different fluids, record composition, viscosity, temperature and solids content separately for each circuit. Compatibility with one product does not establish that the pump will serve every other plant process.
Source: IBGE — Municipal GDP and methodologySupply and service
- Reference distance
About 2,275 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
How the distance is calculated
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026. The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentation
The project destination in Alto do Rodrigues should be included in the quotation with the delivery address and access conditions. Route and transit time are confirmed for the cargo and selected carrier; distance between cities does not replace that planning.
Service for Alto do Rodrigues starts through the factory channels in Cabreúva, Brazil. Describe the need and equipment. Site visits, commissioning or field service depend on scope review, scheduling and commercial conditions.
Send your requirements
To review the FBCN / FBME / FBOT families for the project in Alto do Rodrigues, send the fluid and any known flow, pressure or head and temperature data. For replacement, add the installed pump’s identification and drawing. The team confirms the configuration and proposal scope.
Understand your application
Review process criteria and prepare the information for equipment selection.
Pumps for Sanitation, Water Treatment and Sewerage: Technical Guide for Brazilian Water Utilities
Centrifugal pump selection for raw water intake, treated water pumping, boosters, lift stations and water and wastewater treatment processes: fluid and solids, materials, sealing arrangements, NPSH and the documented limits of the FBCN line — and where the right technology is a different one.
View applicationPumps for Chemical and Pharmaceutical Industry: Selection Guide by Material and Fluid Family
Pump selection for acids, caustic bases, organic solvents, polymers, intermediates and pharmaceutical plant utilities — criteria for material, sealing, classified areas and the boundary between chemical service and sanitary product contact.
View applicationPumps for HVAC, Building Pressurization and Water Supply: Technical Guide for Commercial Buildings and Hospitals
Chilled water, condenser water, transfer and boosting have different demands. Organise thermal load, flow, head, water quality and controls to assess FBCN against actual building conditions.
View applicationBoiler Feed Water and Industrial Hot Water Pump: Condensate Return and HVAC
How to select the boiler feed water pump (feed and condensate return) and the hot water pump for cooling towers, building HVAC, sanitary hot water and solar heating: the three limits that must be checked separately — the pump, the sealing and the system NPSH — and what the FBCN and FBME series manuals document for each.
View applicationFrom requirements to a technical proposal
Share what you already know. Additional details can be clarified with the team during review.
Fluid and process
What needs to be pumped, where it comes from and where it needs to go.
Operating conditions
Flow, pressure or head, temperature and operating schedule, when known.
Equipment and installation
Series, model, identification and space or connection constraints, if a pump is already installed.
Destination and supply
Project location, requested scope and documents required for your purchase.
Direct service from the factory
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together CNC machining, assembly and a hydraulic test bench. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasReview the documentation
Use the family documentation and application guides to prepare your request.
Technical manuals
Installation, operation and maintenance by series, with the document language identified.
Application guides
Understand the process information needed to specify the equipment.
View applicationsMore on industrial pumps in Alto do Rodrigues
See the other pages for this city and for other cities. Service is provided by the factory in Cabreúva, Brazil.
In the same region
Questions about our service
Information to help you prepare your inquiry to FB Bombas.
Up to what viscosity can FBE pumps operate?
It depends on the size. According to Table 2 of manual MTEC-01/01, the maximum is 2,500 SSU for sizes 1/8" to 1/4", 7,500 SSU for 3/8" to 1", 50,000 SSU for 1.1/2" to 2" and 100,000 SSU for 3" to 6". Speed decreases as viscosity rises: the drive is direct up to 7,500 SSU and, above that, by pulley or gear reducer, down to 150 rpm in the 50,000 to 100,000 SSU range. State the viscosity of the fluid for the project in Alto do Rodrigues at start-up and operating temperatures so that engineering can confirm size and speed.
Does FB Bombas serve Alto do Rodrigues?
Yes. Projects in Alto do Rodrigues are handled by the factory team in Cabreúva, Brazil. Send your industrial requirement and the data already available. Configuration, availability, transport and any on-site service are confirmed according to the requested scope.
How do I contact FB Bombas’ technical team?
Use WhatsApp +55 11 97287-4837, telephone +55 11 4898-9200, comercial@fbbombas.com.br or the website form. To help the team, describe the application, project destination and any pump data already available.
How long has FB Bombas been in the market?
FB Bombas began manufacturing industrial pumps in 1944. Its current factory is in Cabreúva, Brazil. The Our History page presents the company’s development; each series’ technical documentation supports equipment evaluation for your project in Alto do Rodrigues.
Is it possible to replace an imported pump with an FB Bombas pump?
Yes, once equivalence has been confirmed. FB Bombas replaces the installed pump with a complete FB pump and, before the order, assesses the installation and sends a data sheet and dimensional drawing. For the installation in Alto do Rodrigues, send the identification and drawing of the current pump, with its duty point, fluid, materials and drive; origin or a similar designation does not guarantee direct replacement.
How can I check whether a pump purchase for Alto do Rodrigues can use BNDES Finame?
Following the BNDES steps, first check whether the equipment appears on the list of items eligible for BNDES Finame financing, in the CFI Catalog on the bank’s website; for that check, ask the sales team for the identification of the model quoted for Alto do Rodrigues. Then apply for financing through an accredited financial agent, such as a commercial bank, development bank, development agency or credit union. The agent reviews the request and, if it approves the operation, forwards it to BNDES, which evaluates the request and authorizes the financing. Being a Brazilian manufacturer does not, on its own, show that the equipment is accredited.
Does FB Bombas retrofit older pumps?
By replacement, not refurbishment. FB Bombas replaces the old pump with a new, complete FB pump manufactured in Cabreúva, Brazil. Before the order, engineering assesses the installation and issues a data sheet and dimensional drawing; the drawing confirms whether the existing baseplate and piping can be kept or need adaptation. FB does not refurbish other manufacturers’ pumps, sell third-party parts or reuse the installed casing. For FB pumps in service, it supplies original parts and maintenance contracts.
Does the FBOT series serve thermal oil applications in Alto do Rodrigues?
Yes. The FBOT is the FB Bombas series developed for pumping organic thermal oils. Manual MTEC-16/00 states temperatures up to 350 °C within the series range and back pull-out construction, which allows the bearing-housing assembly to be removed without disconnecting the piping; the maximum discharge pressure varies with temperature (Figure 1 of the manual), and the fluid must not contain abrasive particles. For the circuit in Alto do Rodrigues, send the oil identification and technical data sheet, the start-up and operating temperatures and the flow and head duty point; model, materials and sealing are confirmed for the circuit.
Does FB Bombas serve fire protection systems?
The portfolio includes pumping sets for fire protection systems. Provide the project, duty point, drive arrangement and required standards and acceptance criteria. Compliance must be checked for the supplied set; standards such as NFPA 20 and NBR 16704 are not certificates issued for the entire company.
What is the warranty on FB pumps?
Warranty conditions are defined in the proposal and contract and vary with the series, operating conditions and agreement. The manuals state what can void it. Under the FBEI manual (MAN001-10), operating with a different fluid or outside the pump’s data sheets and certified documents without FB’s written authorization voids the warranty. Under the FBME service manual (MSERV-08/01), after parts are replaced, the operating and performance warranty applies only with original parts and FB’s consent. For the project in Alto do Rodrigues, confirm the conditions in the quotation.
Tell us about your project
Send your application to our factory team. You do not need every parameter defined to start the conversation.
Talk to usMon–Fri 8 a.m.–5 p.m.
What happens next
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Your industrial requirements
Describe the fluid, application and project destination. Include the model and technical data you already have.