I have a series or model
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
View the catalog
100%Brazilian company
Centrifugal pumps for projects in
Direct service from our factory in Cabreúva, Brazil. Explore FB Bombas series and tell us what your operation needs to transfer or circulate.
Start with your requirements
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
I need to select a pump
Tell us which fluid you need to transfer or circulate and how the pump will be used. You can start the conversation without all the technical details.
Describe my applicationSeries for your process
Selection depends on the fluid and operating conditions. Location identifies the project and delivery destination.
FBCN Series
Centrifugal Pumps
Standardized centrifugal pumps for industrial processes. Compare curves, nozzles and dimensions to select a model.
Explore models
FBME Series
Multistage Centrifugal Pumps
Horizontal construction with multiple stages for pressure elevation. Consult curves, sizes and technical documentation.
Explore models
FBOT Series
Thermal Oil Pumps
Pumps for thermal oil circulation in industrial heating systems. Consult the series operating conditions.
Explore modelsInformation for your project
Application context and points to confirm during technical and commercial review.
Initial guidance
For projects in Umuarama, Paraná, FB Bombas provides service from its factory in Cabreúva, Brazil. Review FBCN for industrial processes, FBME for multistage configurations and FBOT for thermal oil circulation. Selection depends on fluid, flow, head and installation conditions. Check the model curve and documentation with the team.
Industrial context
Describe your plant activity and the pump’s role in the process: transfer, circulation or feed. The team combines this information with fluid and installation data to guide the review of product families.
For supplier qualification on a project in Umuarama, provide the standards, tests and documents required by the buyer. The team confirms the configuration and documentation applicable to the series; supplier registration does not certify every pump.
State whether the requirement is an expansion, new installation or equipment replacement. For replacement, pump identification and its dimensional drawing help check the duty point and existing interfaces.
Technical criteria
For centrifugal pumps in Umuarama, check the model curve at the proposed speed and impeller diameter. Flow and head duty, suction conditions, fluid and installation interfaces need to be reviewed together before confirming the equipment.
In the request for Umuarama, describe the fluid source and destination, operating duty and installation constraints. If a pump is already in use, its model and identification complement process data; they do not replace checking current conditions.
Support for Umuarama starts through the factory channels in Cabreúva, Brazil. Have the equipment identification and a description of operating conditions ready to support maintenance, spare-parts or replacement review.
Applications and operation
For economic context, IBGE records GDP of R$ 5.1 billion for Umuarama in 2023. In the 2021 gross value added breakdown, industry accounts for approximately 19% and agriculture for approximately 4.2%. Reference years differ because the 2022–2023 publication does not include a sector breakdown. These data describe the municipality; pumping requirements need to be specified for your plant’s process.
To organize supply for Umuarama, state the number of pumps and each assembly’s role in the plant. Identify the duty points and operating schedule of each circuit, including the intended conditions for standby equipment.
To describe the industrial application in Umuarama, identify the process stage and whether the pump will transfer, circulate or feed another item of equipment. The same plant may have circuits with different fluid, flow, pressure and duty requirements.
If the operation in Umuarama uses different fluids, record composition, viscosity, temperature and solids content separately for each circuit. Compatibility with one product does not establish that the pump will serve every other plant process.
Source: IBGE — Municipal GDP and methodologySupply and service
- Reference distance
About 650 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
How the distance is calculated
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026. The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentation
The project destination in Umuarama should be included in the quotation with the delivery address and access conditions. Route and transit time are confirmed for the cargo and selected carrier; distance between cities does not replace that planning.
Service for Umuarama starts through the factory channels in Cabreúva, Brazil. Describe the need and equipment. Site visits, commissioning or field service depend on scope review, scheduling and commercial conditions.
Send your requirements
To review the FBCN / FBME / FBOT families for the project in Umuarama, send the fluid and any known flow, pressure or head and temperature data. For replacement, add the installed pump’s identification and drawing. The team confirms the configuration and proposal scope.
Understand your application
Review process criteria and prepare the information for equipment selection.
Pumps for Sanitation, Water Treatment and Sewerage: Technical Guide for Brazilian Water Utilities
Centrifugal pump selection for raw water intake, treated water pumping, boosters, lift stations and water and wastewater treatment processes: fluid and solids, materials, sealing arrangements, NPSH and the documented limits of the FBCN line — and where the right technology is a different one.
View applicationPumps for Chemical and Pharmaceutical Industry: Selection Guide by Material and Fluid Family
Pump selection for acids, caustic bases, organic solvents, polymers, intermediates and pharmaceutical plant utilities — criteria for material, sealing, classified areas and the boundary between chemical service and sanitary product contact.
View applicationPumps for HVAC, Building Pressurization and Water Supply: Technical Guide for Commercial Buildings and Hospitals
Chilled water, condenser water, transfer and boosting have different demands. Organise thermal load, flow, head, water quality and controls to assess FBCN against actual building conditions.
View applicationBoiler Feed Water and Industrial Hot Water Pump: Condensate Return and HVAC
How to select the boiler feed water pump (feed and condensate return) and the hot water pump for cooling towers, building HVAC, sanitary hot water and solar heating: the three limits that must be checked separately — the pump, the sealing and the system NPSH — and what the FBCN and FBME series manuals document for each.
View applicationFrom requirements to a technical proposal
Share what you already know. Additional details can be clarified with the team during review.
Fluid and process
What needs to be pumped, where it comes from and where it needs to go.
Operating conditions
Flow, pressure or head, temperature and operating schedule, when known.
Equipment and installation
Series, model, identification and space or connection constraints, if a pump is already installed.
Destination and supply
Project location, requested scope and documents required for your purchase.
Direct service from the factory
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together CNC machining, assembly and a hydraulic test bench. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasReview the documentation
Use the family documentation and application guides to prepare your request.
Technical manuals
Installation, operation and maintenance by series, with the document language identified.
Application guides
Understand the process information needed to specify the equipment.
View applicationsMore on industrial pumps in Umuarama
See the other pages for this city and for other cities. Service is provided by the factory in Cabreúva, Brazil.
In the same region
Questions about our service
Information to help you prepare your inquiry to FB Bombas.
Up to what temperature can FB pumps operate?
It depends on the series. The published limits are up to 260 °C for the FBCN, 350 °C for the FBOT, 340 °C for the FBEI and 140 °C for the FBME. For the FBE, the 2026 catalogue gives a range of 10 °C to 500 °C; the limit of each configuration depends on materials and sealing. These are series limits: they do not automatically apply to every model, nor do they necessarily occur together with the other maximums. State the start-up, operating and cleaning temperatures of the process in Umuarama.
How do I contact FB Bombas’ technical team?
Use WhatsApp +55 11 97287-4837, telephone +55 11 4898-9200, comercial@fbbombas.com.br or the website form. To help the team, describe the application, project destination and any pump data already available.
Does FB Bombas serve cities neighboring Umuarama?
Service can be requested for Umuarama and other destinations through the factory channels in Cabreúva, Brazil. Provide each project location and required scope to confirm supply and transport conditions. This does not represent a physical FB Bombas location in every city.
Is FB Bombas a national alternative to imported manufacturers in Umuarama?
FB Bombas is a Brazilian manufacturer with direct service from its factory in Cabreúva. To compare an alternative for the project in Umuarama, check performance, materials, dimensions, documentation and commercial conditions. Brazilian origin alone does not guarantee lower cost, shorter lead time or technical equivalence.
How is pump sizing performed?
The review for Umuarama considers the fluid, flow, required pressure or head, temperature, viscosity and installation conditions. Provide what you already know and identify any equipment in use. The team checks the necessary data before confirming series, model, drive and materials.
Is it possible to replace an imported pump with an FB Bombas pump?
Yes, once equivalence has been confirmed. FB Bombas replaces the installed pump with a complete FB pump and, before the order, assesses the installation and sends a data sheet and dimensional drawing. For the installation in Umuarama, send the identification and drawing of the current pump, with its duty point, fluid, materials and drive; origin or a similar designation does not guarantee direct replacement.
How do I request urgent spare parts for Umuarama?
With the pump and part identification. State the pump model and identification, the part as shown in the parts list of the series manual, the urgency and the destination in Umuarama; the team checks availability and confirms service and transport options. There is no published universal parts lead time or automatic guarantee of consignment stock. To reduce downtime, the FBEI (MAN001-10) and FBME (MSERV-08/01) manuals include the list of spare parts for two years of operation.
Are FB pumps energy efficient?
It depends on the model and the duty point; there is no single efficiency figure for the brand. The FBCN and FBME characteristic curves show the efficiency of each model and, for stainless-steel impellers with passages up to 15 mm, the FBCN manual deducts 2 or 3 points from the curve efficiency (Table 4). For the project in Umuarama, compare the absorbed power at the process flow, head and fluid, also considering drive, control and operating duty.
Does FB Bombas manufacture custom pumps?
Yes, in the five Custom Solutions categories: custom complete motor-pump assembly, mobile industrial kit, industrial pump skid, retrofit with a new FB pump in place of the installed one, and special materials projects. The scope of each project is defined with engineering before manufacture in Cabreúva, Brazil.
What is the delivery lead time for pumps to Umuarama?
Lead time to Umuarama depends on the model, configuration and transport. Several FBE models are kept in stock; availability and expected dispatch for each item are confirmed in the quotation. State the destination and the date you need so that the proposal also defines freight and delivery responsibilities.
Tell us about your project
Send your application to our factory team. You do not need every parameter defined to start the conversation.
Talk to usMon–Fri 8 a.m.–5 p.m.
What happens next
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Your industrial requirements
Describe the fluid, application and project destination. Include the model and technical data you already have.