Technical summary
In Sabará, Minas Gerais, FBCN+FBOT covers siderurgia with ASME B73.1 normalized hydraulics — direct dimensional interchangeability with market references. Cabreúva-SP (514 km), 48-72h lead time.
FBCN Centrifugal Pumps
FBCN Centrifugal Pumps in Sabará
Based in Cabreúva-SP at 514 km via BR-381 Rodovia Fernão Dias, FB Bombas delivers to Sabará industrial pumps manufactured in-house since 1944 plus continuous technical support. The IBGE classification places Sabará in the Metropolitana de Belo Horizonte mesoregion — an area whose industrial profile directly influences demand for rotating equipment. FB Bombas technical service in Sabará covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The óleos lubrificantes de laminação, óleos hidráulicos, fluidos de corte and água de processo profile observed in Sabará maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. FB Bombas maintains in Sabará the technical portfolio of CRCC Petrobras + API 610 + API 676 + ASME B73.1 — a regulatory base that spans refining, petrochemicals, mining, sanitation, food, pulp and paper, sugar-ethanol and steel. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Sabará, Minas Gerais with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 610 / API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers) and a traceable Data Book on every unit shipped. For Sabará, where siderurgia is the dominant calling, FB Bombas recommends the FBOT series: FBOT pumps for industrial heating systems in steel mills, thermal oil transfer in heat treatment processes. Technical window: Temperature up to 350°C, Special seal for hot oil, High durability. Through 12-km proximity to the mining cluster of Nova Lima, Sabará inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. The road network BR-381, BR-040, BR-262 and BR-116, with BR-381 Rodovia Fernão Dias as the main axis, defines response time for critical-part shipments and technical visits to Sabará. Sabará has siderurgia and metalurgia as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant.
Nationwide Service
503km from factory
FBCN Centrifugal Pumps|Desde 1944
Based in Cabreúva-SP at 514 km via BR-381 Rodovia Fernão Dias, FB Bombas delivers to Sabará industrial pumps manufactured in-house since 1944 plus continuous technical support. The IBGE classification places Sabará in the Metropolitana de Belo Horizonte mesoregion — an area whose industrial profile directly influences demand for rotating equipment. FB Bombas technical service in Sabará covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The óleos lubrificantes de laminação, óleos hidráulicos, fluidos de corte and água de processo profile observed in Sabará maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. FB Bombas maintains in Sabará the technical portfolio of CRCC Petrobras + API 610 + API 676 + ASME B73.1 — a regulatory base that spans refining, petrochemicals, mining, sanitation, food, pulp and paper, sugar-ethanol and steel. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Sabará, Minas Gerais with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 610 / API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers) and a traceable Data Book on every unit shipped. For Sabará, where siderurgia is the dominant calling, FB Bombas recommends the FBOT series: FBOT pumps for industrial heating systems in steel mills, thermal oil transfer in heat treatment processes. Technical window: Temperature up to 350°C, Special seal for hot oil, High durability. Through 12-km proximity to the mining cluster of Nova Lima, Sabará inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. The road network BR-381, BR-040, BR-262 and BR-116, with BR-381 Rodovia Fernão Dias as the main axis, defines response time for critical-part shipments and technical visits to Sabará. Sabará has siderurgia and metalurgia as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant.
Coverage
Nationwide Service
Distance
503km from factory
80+
Years
API
Certified
100%
Warranty
80+
Years in Market
CRCC
Petrobras Approved
27
States Served
API 610/676
Certified Pumps
Technical summary
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBCN Centrifugal Pumps Industrial in Sabará
Local context
Based in Cabreúva-SP at 514 km via BR-381 Rodovia Fernão Dias, FB Bombas delivers to Sabará industrial pumps manufactured in-house since 1944 plus continuous technical support. The IBGE classification places Sabará in the Metropolitana de Belo Horizonte mesoregion — an area whose industrial profile directly influences demand for rotating equipment. FB Bombas technical service in Sabará covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The óleos lubrificantes de laminação, óleos hidráulicos, fluidos de corte and água de processo profile observed in Sabará maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. FB Bombas maintains in Sabará the technical portfolio of CRCC Petrobras + API 610 + API 676 + ASME B73.1 — a regulatory base that spans refining, petrochemicals, mining, sanitation, food, pulp and paper, sugar-ethanol and steel. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Sabará, Minas Gerais with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 610 / API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers) and a traceable Data Book on every unit shipped. For Sabará, where siderurgia is the dominant calling, FB Bombas recommends the FBOT series: FBOT pumps for industrial heating systems in steel mills, thermal oil transfer in heat treatment processes. Technical window: Temperature up to 350°C, Special seal for hot oil, High durability. Through 12-km proximity to the mining cluster of Nova Lima, Sabará inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. The road network BR-381, BR-040, BR-262 and BR-116, with BR-381 Rodovia Fernão Dias as the main axis, defines response time for critical-part shipments and technical visits to Sabará. Sabará has siderurgia and metalurgia as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant.
Technical solutions
The FB model for Sabará: 48-72h logistics lead time, with the option to accelerate via air modal or alternative routing in operational emergencies. For sealing in Sabará, single cartridge mechanical seal (Plan 11/13) for general service, upgradable to dual when the fluid requires secondary containment is a defensible starting point; final plan approval involves risk analysis of the specific fluid. In Sabará, influence from the mineracao cluster translates into diluted slurries, process water with abrasive solids and slurry pumps when applicable — variables that enter both preliminary sizing and the selection of materials and constructive configurations. Technically, FBCN centrifugal pumps with flow up to 2,200 m³/h, head up to 138 m and temperature up to 260°C (thermal oil via FBOT up to 350°C) covers the typical range observed in Sabará, with margin for process variants (start-up, by-pass, upset conditions). For óleos lubrificantes de laminação, óleos hidráulicos and fluidos de corte in Sabará, the baseline is austenitic stainless steels (AISI 304/316) with attention to thermal expansion — FB engineering tunes from immersion tests, field history and iron/stainless/duplex compatibility within the local fluid classes. In Sabará, FBEI and FBCN+FBOT cover the technical range observed in the field — from primary transfer and circulation to drop-in retrofit cases (ASME B73.1 dimensional interchangeability) with global majors. Typical applications mapped for Sabará include lubrificação de cadeiras de laminação, hidráulica industrial, resfriamento de lingotamento and aquecimento de processo — each with its own requirements for NPSH, acceptable pulsation and start-up strategy.
Why FB Bombas
In Sabará, high industrial density — multiple plants in a small radius, meaningful cumulative demand — a characteristic that sizes FB's commercial strategy: application-engineering coverage, visit cadence and depth of consignment stock. In Sabará, mineracao-cluster seasonality manifests as 24/7 operation with annual scheduled outages — concentrated PM windows and continuous demand for critical parts — information FB Bombas uses to schedule plant capacity and ready-to-ship inventory. In Sabará, balanced logistics — freight is a contained fraction of equipment cost — a variable entering the decision between CIF/FOB freight, order consolidation and contractual delivery window. Sabará belongs to the set of cities with relevant industrial scale in the state — an input that defines commercial priority and relationship type (one-shot, annual program, master agreement). In Sabará, the high complexity index in the fluid mix sets diversified fluid roster — requires a broad catalogue of materials and sealing configurations — a factor adjusting both technical-spec depth and materials-catalogue scope. Sabará has siderurgia as its main industrial-pump application front — from primary transfer to internal circulation in process equipment. For Sabará, series FBEI for lubrificação de cadeiras de laminação and hidráulica industrial and series FBCN+FBOT for resfriamento de lingotamento and aquecimento de processo — initial reference for technical discussion with application engineering. Sabará sits alongside relevant industrial neighbors — a base that justifies regional rotating-asset management programs and PMs synchronized across multiple customers. Being among the 50 most populous cities in MG, maintains a relevant industrial base, Sabará presents volume and application diversity that justify FB Bombas' structured service. process-water booster, slurry pumping, pit dewatering and tailings dam services: this is the typical application set around the mineracao cluster in which Sabará sits. Sabará: óleos lubrificantes de laminação, óleos hidráulicos and fluidos de corte. Each fluid defines a distinct set of pump requirements — flow, available NPSH, sealing strategy.
Logistics & support
Cabreúva-SP → Sabará via BR-381 Rodovia Fernão Dias (514 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. For Sabará, 24-48h via federal highways is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. In Sabará, FB Bombas structures a spare-parts program tailored to the operation profile — class-A items on consignment, class-B on scheduled order and class-C on demand. The BR-381, BR-040, BR-262 and BR-116 mesh provides logistics redundancy for Sabará — when one route is restricted (rains, construction, accidents), delivery is rerouted without compromising the critical lead time. For Sabará, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number. For Sabará, FB service follows the planned technical visits with 1-2 day mobilization window — direct coordination with the customer model — application engineers conduct pre-scheduled visits while remote support via documentation and phone covers point queries.
Request your proposal
FB engineers serve Sabará for the FBCN series with a sized proposal — duty point, fluid, field conditions and supply lead time.
Talk to engineeringWhy FB Bombas
National leadership in industrial pumping
For over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Brazil Differentiators
Advantages for your Industrial Operation
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Complete National Coverage
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Brazil-Wide Logistics
Nationwide deliveries through partner carrier network with optimized lead times.
Dedicated Engineering
Technical team available for sizing, project work and after-sales support across any region.
Strategic Stock
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Discover FB Bombas
Own factory in Cabreúva/SP with full production capability, serving Sabará and all of Brazil
Own Manufacturing
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
Custom Projects
We size and build complete systems, ready for installation at your industrial plant.
Replacement Parts
We keep original parts in stock for all series, ensuring continuity of your operation.
Industrial Production
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Sabará and the entire Minas Gerais region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteOur Product Line
Soluções completas em bombeamento industrial com tecnologia de ponta
Need a Custom Solution?
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Industrial Capacity
Production line dedicated to industrial pumps
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
350°C
Max. Temp. FBOT
1,350 l/min
Max. Flow FBE
2,200 m³/h
Max. Flow FBCN
Companies that Trust FB Bombas
Present in the largest industrial projects in Brazil and Latin America
Explore by pump type
See specific solutions for Sabará
Industrial Applications Served
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Pumps for Sanitation, Water Treatment and Sewerage: Technical Guide for Brazilian Water Utilities
Read technical guide
Pumps for Chemical and Pharmaceutical Industry: Selection Guide by Material and Fluid Family
Read technical guide
Pumps for HVAC, Building Pressurization and Water Supply: Technical Guide for Commercial Buildings and Hospitals
Read technical guide
Industrial and Building Hot Water Pumps: HVAC, Boiler, Sanitary and Solar Heating
Read technical guide
Centrifugal Pumps in Nearby Cities
Regional service from Sabará — same series, same factory in Cabreúva/SP.
Frequently Asked Questions about Sabará
FB Bombas manufactures three major lines: FBE (external gear) for viscous fluids, FBEI (internal gear) for lubricating fluids, FBCN (normalized centrifugal) for water and low-viscosity fluids, and FBOT (specific centrifugal) for thermal oil circuits. We also serve fire protection systems in compliance with NFPA and NBR 16704.
Yes. FB Bombas offers retrofit of existing installations, including seal upgrades, replacement of worn components, adaptation for new fluids and hydraulic performance improvement. The assessment is based on a technical report of the current installation.
Yes. The FBE and FBCN lines were designed with easy access to wear-prone components, allowing disassembly and inspection with conventional tools. Detailed technical manuals and direct factory replacement parts availability simplify maintenance routines.
Mechanical seal configuration is defined by engineering according to the fluid, temperature and operating pressure. Options include single seals, double seals (tandem or back-to-back), cartridge seals and packing glands for specific applications. For hazardous fluids, double seals with barrier are recommended.
Yes. The FBCN series follows ASME B73.1 normalization (North American dimensional standard for end-suction process pumps) — which makes the pump-and-motor set interchangeable with global manufacturers (KSB, Sulzer, Goulds, Flowserve) already installed in plants in Sabará. For retrofits, the existing baseplate, suction/discharge piping and foundations are usually preserved; what changes is the rotating set. FB application engineering performs the dimensional gap analysis prior to supply.
Yes. FB Bombas’ application engineering analyzes the installed pump specifications (flow, pressure, viscosity, temperature) and proposes dimensional or functional technical equivalence with one of our series. Many clients in Sabará have already made this replacement with gains in lead time, cost and local support.
The FB line covers a wide range: mineral and synthetic oils, asphalt (CAP), BPF fuel oils, petroleum derivatives, molasses, resins, viscous chemical and hydraulic products (FBE series); raw and treated water, process fluids, industrial effluents (FBCN series); thermal oil at elevated temperatures (FBOT series). Each application is sized according to fluid viscosity, temperature and chemical compatibility.
Service to Sabará is handled directly by the FB Bombas team at the Cabreúva/SP factory — no intermediaries, no resellers. That means direct contact with application engineering for sizing, technical quotes returned within 24h and original spare parts supplied without distributor markup. On-site technical visits to Sabará are planned based on project criticality.
Shorter delivery times (no import dependency), direct technical support from FB engineering, replacement parts with in-house manufacturing, prices in local currency (no exchange rate exposure) and on-site service for projects in Sabará and surrounding areas. FB Bombas has been manufacturing in Brazil since 1944.
Yes. Since FB Bombas manufactures entirely in Cabreúva/SP, replacement parts for the FBE, FBEI, FBCN and FBOT series are available directly from the factory, with short lead times for scheduled stops and priority service for emergencies. This significantly reduces total cost of ownership.
Need gear or centrifugal pumps in Sabará?
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
Talk to us
WhatsApp
+55 11 97287-4837
Reply during business hours
Phone
+55 11 4898-9200
Mon–Fri · 8 a.m.–5 p.m.
E-mail
comercial@fbbombas.com.br
Sales
Factory
Cabreúva — SP
Av. Adolpho João Traldi, 80
