Based in Cabreúva-SP at 547 km via BR-262 (via Bauru-SP), FB Bombas delivers to Três Lagoas industrial pumps manufactured in-house since 1944 plus continuous technical support. FB Bombas technical service in Três Lagoas covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The IBGE classification places Três Lagoas in the Leste de Mato Grosso do Sul mesoregion — an area whose industrial profile directly influences demand for rotating equipment. In Três Lagoas, óleos, licor negro, água branca and óleo térmico make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality). Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Três Lagoas, Mato Grosso do Sul with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. Três Lagoas sits 284 km from the sugar-and-ethanol cluster centered in Catanduva, a proximity that usually means shared suppliers and aligned maintenance standards. Logistically, the city connects to Cabreúva-SP via BR-262 (via Bauru-SP), complemented by alternatives BR-262, BR-163 and BR-267 — a network that supports technical service within tight operational windows. The FB Bombas FBCN series answers celulose demand in Três Lagoas — FBCN centrifugal pumps for pulp and paper processes, liquor transfer, stock and process water. Operating range: High corrosion resistance, Open or closed impeller, Industrial robustness. FB Bombas maintains an installed base in Três Lagoas with a structure of spare parts (impeller, shaft, wear ring, cartridge mechanical seal, bearings) and scheduled preventive maintenance, with direct supply from the Cabreúva-SP factory. For projects in Três Lagoas that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Três Lagoas has celulose and papel as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant.
Based in Cabreúva-SP at 547 km via BR-262 (via Bauru-SP), FB Bombas delivers to Três Lagoas industrial pumps manufactured in-house since 1944 plus continuous technical support. FB Bombas technical service in Três Lagoas covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The IBGE classification places Três Lagoas in the Leste de Mato Grosso do Sul mesoregion — an area whose industrial profile directly influences demand for rotating equipment. In Três Lagoas, óleos, licor negro, água branca and óleo térmico make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality). Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Três Lagoas, Mato Grosso do Sul with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. Três Lagoas sits 284 km from the sugar-and-ethanol cluster centered in Catanduva, a proximity that usually means shared suppliers and aligned maintenance standards. Logistically, the city connects to Cabreúva-SP via BR-262 (via Bauru-SP), complemented by alternatives BR-262, BR-163 and BR-267 — a network that supports technical service within tight operational windows. The FB Bombas FBCN series answers celulose demand in Três Lagoas — FBCN centrifugal pumps for pulp and paper processes, liquor transfer, stock and process water. Operating range: High corrosion resistance, Open or closed impeller, Industrial robustness. FB Bombas maintains an installed base in Três Lagoas with a structure of spare parts (impeller, shaft, wear ring, cartridge mechanical seal, bearings) and scheduled preventive maintenance, with direct supply from the Cabreúva-SP factory. For projects in Três Lagoas that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Três Lagoas has celulose and papel as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant.
Years
Compliant
Tested
Direct answer for industrial projects — recommended series, standards compliance and logistics.
The FBCN+FBOT (normalized centrifugal) line is specified in Três Lagoas, Mato Grosso do Sul for Polo de Celulose de Três Lagoas — head up to 135 m, temperature up to 260°C. ASME B73.1, in-house manufacturing in Cabreúva-SP (547 km).
Based in Cabreúva-SP at 547 km via BR-262 (via Bauru-SP), FB Bombas delivers to Três Lagoas industrial pumps manufactured in-house since 1944 plus continuous technical support. FB Bombas technical service in Três Lagoas covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The IBGE classification places Três Lagoas in the Leste de Mato Grosso do Sul mesoregion — an area whose industrial profile directly influences demand for rotating equipment. In Três Lagoas, óleos, licor negro, água branca and óleo térmico make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality). Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Três Lagoas, Mato Grosso do Sul with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. Três Lagoas sits 284 km from the sugar-and-ethanol cluster centered in Catanduva, a proximity that usually means shared suppliers and aligned maintenance standards. Logistically, the city connects to Cabreúva-SP via BR-262 (via Bauru-SP), complemented by alternatives BR-262, BR-163 and BR-267 — a network that supports technical service within tight operational windows. The FB Bombas FBCN series answers celulose demand in Três Lagoas — FBCN centrifugal pumps for pulp and paper processes, liquor transfer, stock and process water. Operating range: High corrosion resistance, Open or closed impeller, Industrial robustness. FB Bombas maintains an installed base in Três Lagoas with a structure of spare parts (impeller, shaft, wear ring, cartridge mechanical seal, bearings) and scheduled preventive maintenance, with direct supply from the Cabreúva-SP factory. For projects in Três Lagoas that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Três Lagoas has celulose and papel as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant.
Lead time for critical parts to Três Lagoas is typically 48-72h — a function of distance (547 km) and the available road modal. Três Lagoas typically calls for FBEI and FBCN+FBOT — an initial recommendation based on local productFit, dominant industrial cluster and identified fluid profile; final technical approval is refined by application engineering. In Três Lagoas, materials such as cast iron with proper coating or stainless steels when the fluid requires answer the requirements of óleos, licor negro and água branca — a combination that drives service life of casing, impeller, shaft and shaft sleeve, refined via corrosion analysis using removal rates (mpy). The lubrificação, circulação de licor, recalque de água branca and circulação de polpa set accounts for a large share of industrial demand in Três Lagoas; FB Bombas keeps documented history of analogous applications for sizing benchmarks. For Três Lagoas, FBCN centrifugal pumps with flow up to 2,200 m³/h, head up to 135 m and temperature up to 260°C (thermal oil via FBOT up to 350°C) is a starting specification — fine-tuning happens with the actual system curve (friction, available NPSH, headloss). In Três Lagoas, influence from the sucroalcooleiro cluster translates into sugarcane juice, vinasse, molasses and thermal oil for evaporators — 24/7 operation during harvest — variables that enter both preliminary sizing and the selection of materials and constructive configurations. Recommended sealing for the operation profile in Três Lagoas is single cartridge mechanical seal (Plan 11/13) for general service, upgradable to dual when the fluid requires secondary containment — a choice that affects MTBF and maintenance procedure. For the FBCN centrifugal in Três Lagoas, correct selection comes from the circuit's flow × head pair: the right model is the one that places the operating point near BEP (best efficiency point), where efficiency and reliability go together. A pump oversized "to be safe" runs in internal recirculation — vibration, radial load and short seal life.
The demand profile in Três Lagoas reflects very high industrial concentration — territory for multi-customer technical-visit campaigns. Typical seasonality of the sucroalcooleiro cluster (concentrated harvest season (Apr-Nov) creates short maintenance windows and intense parts demand during milling) directly impacts supply scheduling and PMs in Três Lagoas. Economically, delivery to Três Lagoas brings balanced logistics — freight is a contained fraction of equipment cost. Fluid-roster complexity in Três Lagoas is medium — moderate fluid roster — concentration in a few main technical categories. The economic base of Três Lagoas confirms the profile: industry accounted for 54.1% of municipal value added (IBGE, 2021), and 2023 GDP totaled R$ 14.8 billion — a scale that sustains recurring demand for process pumps, utilities and installed-fleet replacement. Três Lagoas ranks among the 10 largest cities in the state at relevant industrial scale — a feature that enters the sizing of the service strategy. In Três Lagoas, celulose accounts for a large share of the pumping load — combining utility lines (water, steam, compressed air) with dedicated process circuits. For Três Lagoas, the FBFS line offers a complete fire-protection package: main pump, jockey, control panel NFPA 20 and diesel fuel tank — scope per NFPA 20. In Três Lagoas, engineered-to-order projects benefit from the FB combination: normalized baseline hydraulics + tailored customization (instrumentation, automation, special materials) with scope-defined lead time. In Três Lagoas, óleos, licor negro and água branca form the typical fluid set — guiding both series selection (gear, centrifugal, thermal oil) and constructive detail (closed/open/semi-open impeller). Três Lagoas shows cases like series FBEI for lubrificação and series FBCN+FBOT for circulação de licor and recalque de água branca — a package FB Bombas addresses with real-curve sizing, material recommendation and dimensioned seal configuration. In Três Lagoas, near a sucroalcooleiro cluster, applications such as juice circulation, molasses transfer, vinasse boost and thermal oil for evaporators make up the operational agenda — each backed by technical references in the FBE/FBCN/FBOT catalogues. Três Lagoas, among the 10 most populous cities in MS, is a regional benchmark of economic activity, sustains a predictable B2B demand chain — an ideal profile for scheduled supply and multi-year replacement contracts.
The main logistics axis between Cabreúva-SP and Três Lagoas is BR-262 (via Bauru-SP), totaling 547 km — a route that sets the default delivery time for finished equipment. For Três Lagoas, the recommended strategy for critical parts involves a minimum consignment stock at the plant — mechanical seal, bearings, wear ring — reducing MTTR during unplanned shutdowns. Dispatch from the Cabreúva-SP factory to Três Lagoas occurs after bench hydraulic testing and Data Book verification — mandatory steps in FB's quality control. Beyond the main route, Três Lagoas is accessible via BR-262, BR-163 and BR-267 — options that provide redundancy in case of blockages or restricted operating windows. For large sets (skids, motors above 200 hp) destined to Três Lagoas, transport uses platform trailers with escort when required by gauge. Typical transit time to Três Lagoas: 24-48h via federal highways — the window used in FB Bombas' standard commercial commitment. Technical-service coverage for Três Lagoas involves planned technical visits with 1-2 day mobilization window — direct coordination with the customer.
Technical inquiry for the FBCN series in Três Lagoas: real-curve sizing, material recommendation and sealing configuration. Direct service from the FB team.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Own factory in Cabreúva/SP with full production capability, serving Três Lagoas and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Três Lagoas and the entire Mato Grosso do Sul region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteFour catalog series, fire-fighting systems and engineered-to-order — in-house manufacturing and hydrostatic testing on 100% of pumps
Our technical team is ready to develop the ideal solution for your application
Contact Us
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for Três Lagoas
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from Três Lagoas — same series, same factory in Cabreúva/SP.
In the pulp and paper industry, the FBCN series is the primary choice for pulp, black liquor, process water and effluent pumping. FBE serves applications with starch, glue and viscous additives. FBOT circulates thermal oil in dryers and calenders.
Each series has its thermal limit: with heating jacket and special sealing, FBE and FBEI reach 350°C; FBOT hits the same 350°C in thermal oil circuits; FBCN goes up to 260°C when fitted with proper materials and sealing. Safe operation requires correctly sized sealing and materials.
You can reach us on WhatsApp at +55 11 97287-4837, write to comercial@fbbombas.com.br or fill in the website form. Technical requests receive prioritized feedback within the same business day, coming straight from application engineering.
For water, condensate and low-viscosity fluids, the recommendation is the FBCN standardized centrifugal — 53 models with bench-tested curves and back-pull-out maintenance, which frees the rotating assembly without dismantling the piping. The exact model comes from the circuit’s flow × head pair.
Yes — the standard catalog is only the starting point. For special applications, FB Bombas engineers custom solutions: changes in construction materials, sealing arrangements, integrated heating systems, skids, mobile assemblies and retrofit of existing installations. Before manufacturing, every special project is validated by engineering.
FB Bombas has been manufacturing industrial pumps since 1944, with over 82 years of continuous experience. The factory in Cabreúva/SP operates with engineering, manufacturing and testing under one roof, ensuring total quality control on every unit supplied to Três Lagoas and all of Brazil.
Yes. FBOT is FB Bombas’ specific centrifugal pump for thermal oil circuits, operating at elevated temperatures with fluids like Therminol, Dowtherm and similar. Material and sealing selection is done according to the maximum operating temperature and type of thermal oil.
It does. FB Bombas' retrofit service for existing installations encompasses updated seals, replaced worn components, adjustment to new fluids and improved hydraulic performance. To evaluate each case, the reference is the technical report on the current installation.
Lead time depends on the chosen series, construction materials and stock availability. For standard configuration pumps, lead times are shorter; for special or custom constructions, the schedule is informed in the technical proposal. Logistics for Três Lagoas is handled by our regular road operator.
Three fluid fronts are covered by the FB series. FBE: mineral and synthetic oils, asphalt (CAP), BPF fuel oils, petroleum derivatives, molasses, resins, viscous chemical and hydraulic products. FBCN: raw and treated water, process fluids and industrial effluents. FBOT: thermal oil at elevated temperatures. Fluid viscosity, temperature and chemical compatibility guide the sizing of every application.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
