Quote for a
Request your fire pump quote directly from the FB Bombas engineering team, which assembles in Cabreúva-SP the FBFS, a complete electric, diesel or electric + diesel skid, with FBCN centrifugal main pump, jockey and panel, designed in accordance with NFPA 20 or ABNT NBR 16704, when specified. Brazilian industrial pump manufacturer since 1944.
The applicable standard and conformity documentation are defined for each project.
How it works
3 simple steps for your quote
Submit Your Request
Fill in the form with the project data: design flow and pressure, driver type and the standard adopted.
Technical Sizing
Engineering checks the operating point and indicates the FBFS configuration that meets it.
Receive Your Quote
You receive the proposal with the configuration, scope and conditions in writing.
What to provide
- Hydraulic design memorandum: design flow and pressure, with units and pressure reference; combined demand where sprinklers are included
- Suction: reservoir type, minimum water level and elevation difference to the pump
- Intended driver: electric, diesel or both, and available electrical supply
- State where the project is located, adopted standard (NBR 16704 or NFPA 20) and required documents
- Scope: main pump, jockey, control panel and assembly
Partial data is enough to get started. Nameplate photos, drawings or data sheets can be sent via WhatsApp.
Request your Fire Pump Quote
Fill out the form and engineering replies after reviewing your request.
How much does a fire pump system cost?
Fire-fighting systems designed to NFPA 20 or ABNT NBR 16704 have no public list price.
The value is defined by the project hydraulic demand (sprinkler or hydrant flow × pressure), the driver type (electric, diesel or redundant) and the package scope — main pump, jockey, panel, piped skid or pump house.
FB Bombas manufactures complete FBFS packages and quotes per project, factory-direct from Cabreúva-SP, with the package technical documentation for review by the insurer and the Fire Department.
What drives the price of a fire pump system
Design flow and pressure
The hydraulic demand of the hazard, defined in the system design (for example, automatic sprinklers under ABNT NBR 10897 or hydrants under ABNT NBR 13714), sizes the main pump and driver — the starting point of the value.
Driver type
Electric, diesel or electric + diesel, according to the project. The engine, batteries, tank and controller of the diesel package have their scope defined in the proposal.
Package scope
Standard package (main pump + jockey + panel), complete piped skid or prefabricated pump house — each step extends the supply.
Panel and starting method
Control panel and direct, soft or VFD starting (on request), defined by the project standard and ABNT NBR 5410.
There is no public list price for systems designed to NFPA 20 or ABNT NBR 16704 — the market quotes per project. At FB Bombas, the package is sized by engineering from the hydraulic demand of the hazard, and the quotation comes with detailed scope (main pump, jockey, panel, driver), lead time and written conditions.
What defines the price of an NFPA 20 fire-fighting system?
Three blocks define the value:
- the project hydraulic demand — flow and pressure required by sprinklers (ABNT NBR 10897) or hydrants (ABNT NBR 13714), which size pump and driver;
- the driver — electric, diesel or electric + diesel redundancy;
- the scope — standard package with jockey and panel, complete piped skid or prefabricated pump house.
Documentation for the insurer is defined in the proposal.
Does a diesel system cost more than an electric one?
Generally yes: the diesel package includes a fire-service engine, batteries with charger, fuel tank and a dedicated control panel — components the equivalent electric package does not require.
Diesel is specified when electric power is not assured in the fire scenario; critical systems (data centers, port terminals) may adopt electric + diesel redundancy. The choice comes from the project, not from a catalog.
Can I buy the fire pump system directly from the manufacturer?
Yes. FB Bombas manufactures FBFS packages in Cabreúva-SP and sells factory-direct: main pump, jockey and panel sized by engineering, designed to NFPA 20 or ABNT NBR 16704 as the project requires, with commissioning support defined in the proposal. Send your project hydraulic demand through the form on this page to receive the proposal.
Buy factory-direct
Application engineering in the specification
The hydraulic design memorandum, suction conditions, driver and adopted standard guide selection of the FBCN main pump and FBFS configuration before the proposal.
Manufacturer warranty
The warranty is issued by the manufacturer itself: term, coverage and exclusions are defined in writing in the commercial proposal, according to the series and operating conditions.
Genuine parts and direct after-sales
Spare parts for the fire pump package and after-sales technical support are defined from the identification of the supplied equipment; availability and lead time are confirmed at quotation.
Factory lead time confirmed in writing
The manufacturing order opens at the plant itself and the lead time is documented in the technical-commercial proposal, along with performance curve and conditions.
Brazilian industrial pump manufacturer since 1944 — factory in Cabreúva-SP.
Frequently asked questions
Timing, data to send, coverage, visits and payment
How long to receive a quote?
Our technical team replies after reviewing your request. Timing depends on the sizing scope.
What information do I need to provide?
For accurate sizing, provide: fluid type, desired flow (L/min or m³/h), working pressure (bar or psi), operating temperature, and fluid viscosity if available.
Does FB Bombas manufacture custom pumps?
Yes. In addition to the standard FBE, FBEI, FBCN, FBOT and FBME lines, we build pumps to order for special applications, with the specification defined case by case.
Do you serve all of Brazil?
Yes. We serve all of Brazil from our factory in Cabreúva/SP and answer project inquiries from Latin America; freight, destination and shipping documents are defined in the proposal.
Is it possible to visit the factory?
Yes, we receive technical visits by prior appointment. Our factory is at Av. Adolpho João Traldi, 80, Cabreúva/SP. Schedule by phone +55 11 4898-9200.
What payment methods are accepted?
Payment methods and terms are defined in the commercial proposal, after registration and credit review. If your purchasing process requires a specific method, state it in the request.
More on fire protection
Before you send your request, explore
For a fire pump quote, send flow, pressure and driver; the factory replies with a proposal.
