The óleos industriais e fluidos de processo and água industrial profile observed in Dois Irmãos maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. Logistically, the city connects to Cabreúva-SP via BR-116 (via Régis Bittencourt até PR/SC), complemented by alternatives BR-116, BR-290 and BR-101 — a network that supports technical service within tight operational windows. Dois Irmãos sits 37 km from the refining cluster centered in Canoas, a proximity that usually means shared suppliers and aligned maintenance standards. In Dois Irmãos, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. In Dois Irmãos, Indústria de Transformação concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. FB Bombas is a Brazilian manufacturer of industrial pumps serving Dois Irmãos, Rio Grande do Sul, with the FBE, FBCN, FBOT and FBEI series applied to the indústria de transformação sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and qualification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. Service to Dois Irmãos is coordinated from the Cabreúva-SP factory, route BR-116 (via Régis Bittencourt até PR/SC) (801 km), with a technical team for selection, commissioning and replacement support.
The óleos industriais e fluidos de processo and água industrial profile observed in Dois Irmãos maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. Logistically, the city connects to Cabreúva-SP via BR-116 (via Régis Bittencourt até PR/SC), complemented by alternatives BR-116, BR-290 and BR-101 — a network that supports technical service within tight operational windows. Dois Irmãos sits 37 km from the refining cluster centered in Canoas, a proximity that usually means shared suppliers and aligned maintenance standards. In Dois Irmãos, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. In Dois Irmãos, Indústria de Transformação concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. FB Bombas is a Brazilian manufacturer of industrial pumps serving Dois Irmãos, Rio Grande do Sul, with the FBE, FBCN, FBOT and FBEI series applied to the indústria de transformação sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and qualification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. Service to Dois Irmãos is coordinated from the Cabreúva-SP factory, route BR-116 (via Régis Bittencourt até PR/SC) (801 km), with a technical team for selection, commissioning and replacement support.
Years
Compliant
Tested
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBEI gear pumps (FB Bombas) in Dois Irmãos, Rio Grande do Sul: sized for indústria de transformação, viscous fluids up to 350°C, API 676 compliance and in-house manufacturing in Cabreúva-SP at 801 km. Typical critical-parts lead time: 72-96h.
The óleos industriais e fluidos de processo and água industrial profile observed in Dois Irmãos maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. Logistically, the city connects to Cabreúva-SP via BR-116 (via Régis Bittencourt até PR/SC), complemented by alternatives BR-116, BR-290 and BR-101 — a network that supports technical service within tight operational windows. Dois Irmãos sits 37 km from the refining cluster centered in Canoas, a proximity that usually means shared suppliers and aligned maintenance standards. In Dois Irmãos, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. In Dois Irmãos, Indústria de Transformação concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. FB Bombas is a Brazilian manufacturer of industrial pumps serving Dois Irmãos, Rio Grande do Sul, with the FBE, FBCN, FBOT and FBEI series applied to the indústria de transformação sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and qualification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. Service to Dois Irmãos is coordinated from the Cabreúva-SP factory, route BR-116 (via Régis Bittencourt até PR/SC) (801 km), with a technical team for selection, commissioning and replacement support.
Gear pump selection for Dois Irmãos starts with viscosity at the real pumping temperature — not the 40 °C catalog figure — the typical case of óleos industriais e fluidos de processo. With that data, engineering defines speed (flow is proportional), bushing materials and the thermal arrangement: jacketed body for cold starts and a seal compatible with the hot fluid. Technical fit in Dois Irmãos points to FBEI and FBCN as the series suitable for typical local operations — a baseline recommendation; the final specification depends on the specific process parameters. In Dois Irmãos, transferência em linhas de produção and utilidades de planta are the applications that most often appear in local industrial operations; each defines a distinct set of process variables. Dois Irmãos receives equipment after hydraulic testing and ISO 21940 G2.5 balancing — traceable report attached to the Data Book.
Technically, Dois Irmãos shows low complexity in its fluid mix — lean fluid roster — technical operation focused on few main vectors. Demand in Dois Irmãos is characterized by medium density — regular and predictable opportunity pipeline, a typical regional pattern of the mesoregion. The economic base of Dois Irmãos confirms the profile: industry accounted for 42.5% of municipal value added (IBGE, 2021), and 2023 GDP totaled R$ 2.6 billion — a scale that sustains recurring demand for process pumps, utilities and installed-fleet replacement. The fluid catalogue in Dois Irmãos (óleos industriais e fluidos de processo and água industrial) demands case-by-case technical analysis: pour point, Saybolt viscosity at operating temperature, suspended solids and pH profile. The refino cluster around Dois Irmãos concentrates applications crude transfer, distillation-tower circulation, charge pumps for reactors and movement of derivatives — a technical package where FB Bombas has commissioning, retrofit and long-term support history. indústria de transformação plants in Dois Irmãos sustain a continuous pipeline of technical demand — from scheduled replacement to ASME B73.1 dimensional retrofit replacing imported equipment.
For Dois Irmãos, 48-72h, with possible technical stop is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. Cabreúva-SP → Dois Irmãos via BR-116 (via Régis Bittencourt até PR/SC) (801 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. For Dois Irmãos, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
For projects with FBE pumps in Dois Irmãos, talk to FB application engineering: viscosity analysis, available NPSH, seal materials and operating regime — technical response within 24-48 business hours.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Own factory in Cabreúva/SP with full production capability, serving Dois Irmãos and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Dois Irmãos and the entire Rio Grande do Sul region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteFour catalog series, fire-fighting systems and engineered-to-order — in-house manufacturing and hydrostatic testing on 100% of pumps
Our technical team is ready to develop the ideal solution for your application
Contact Us
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for Dois Irmãos
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from Dois Irmãos — same series, same factory in Cabreúva/SP.
The FB portfolio handles an extensive spectrum of fluids. The FBE series takes mineral and synthetic oils, asphalt (CAP), BPF fuel oils, petroleum derivatives, molasses, resins plus viscous chemical and hydraulic products; the FBCN series works with raw and treated water, process fluids and industrial effluents; the FBOT series is dedicated to thermal oil at elevated temperatures. Each case is sized considering viscosity, temperature and chemical compatibility.
Yes. ASME B73.1 dimensional compliance — the North American standard for horizontal end-suction process centrifugal pumps — is a feature of the FBCN series and enables retrofit on existing baseplates in Dois Irmãos plants, regardless of which brand occupied the base, provided the designation coincides. Shaft, suction/discharge flanges, casing feet and impeller centerline obey the standard, so the new pump takes the position without touching piping or baseplate.
It offers both. The FAT (Factory Acceptance Test) takes place on the Cabreúva/SP bench and covers hydraulic testing, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration; when the customer specifies, inspection witnesses the tests. In the SAT (Site Acceptance Test) of Dois Irmãos projects, application engineering supports commissioning with startup checklist, laser alignment and capture of the baseline vibration signature.
It does. When a special application demands something beyond the standard portfolio, FB Bombas develops the solution: modified construction materials, specific sealing arrangements, system-integrated heating, skids, mobile assemblies and retrofit of existing installations. Engineering reviews each special project as a step prior to manufacturing.
The portfolio covers four in-house series: FBE (external gear) for viscous fluids, FBEI (internal gear) for low-pulsation services, FBCN (standardized centrifugal) for water and light fluids and FBOT (dedicated centrifugal) for thermal oil — plus complete fire-fighting systems per NFPA 20 and NBR 16704.
FB Bombas holds: active CRCC at Petrobras (supplier registry for Oil & Gas); compliance with API 676 (international standard for positive displacement pumps — FBE series); compliance with ASME B73.1 (standard for process centrifugal pumps — FBCN series); compliance with NFPA (National Fire Protection Association) standards and ABNT NBR 16704 for stationary fire protection pump systems.
The FB Bombas rotating set is balanced per ISO 21940 G2.5 (a balancing grade equivalent to API 610 requirements for heavy-duty service) — required for critical projects in Dois Irmãos with continuous regime, plants with online vibration monitoring or applications with high cost of unplanned downtime. For machines running above 3,600 RPM or with rotating mass over 50 kg, balancing is performed on two planes with a piezoelectric sensor.
Coverage against manufacturing defects accompanies the supply of FB pumps — the full terms appear in the commercial proposal. It holds as long as installation, operation and maintenance follow what the manual specifies and the sizing performed by engineering. Our technical team clarifies the specific conditions of your project in Dois Irmãos.
Quotes can be requested via WhatsApp at +55 11 97287-4837, email comercial@fbbombas.com.br or through our website form. Provide the application (fluid, flow, pressure, temperature) and the technical team will respond with a proposal sized for your conditions in Dois Irmãos.
Yes. FB Bombas is a Brazilian manufacturer accredited in FINAME (BNDES Special Industrial Financing Agency), which qualifies equipment supplied to Dois Irmãos for BNDES Finame financing lines (Industrial Working Capital, Modernization, Capital Goods) with preferential conditions for national industry. The commercial team provides the product FINAME code on the technical proposal for inclusion in the customer financial plan.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
