The fluid roster in Santo Antônio do Jacinto (óleos industriais and água industrial) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. FB Bombas aftermarket support in Santo Antônio do Jacinto covers technical service, spare parts with traceable Data Book, scheduled preventive maintenance (PM) and full overhaul on a factory bench with certified FAT. Through 67-km proximity to the pulp-and-paper cluster of Eunapolis, Santo Antônio do Jacinto inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Santo Antônio do Jacinto, Minas Gerais with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. For the Santo Antônio do Jacinto, Minas Gerais market, FB Bombas offers industrial pumps with certified hydraulic tests, ASME B73.1 (dimensional interchangeability) and a traceable Data Book per unit — a technical package that shortens the customer homologation cycle. The road network BR-381, BR-040, BR-262 and BR-116, with BR-381 Rodovia Fernão Dias as the main axis, defines response time for critical-part shipments and technical visits to Santo Antônio do Jacinto. Service to Santo Antônio do Jacinto is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (1046 km), with a technical team for selection, commissioning and replacement support.
The fluid roster in Santo Antônio do Jacinto (óleos industriais and água industrial) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. FB Bombas aftermarket support in Santo Antônio do Jacinto covers technical service, spare parts with traceable Data Book, scheduled preventive maintenance (PM) and full overhaul on a factory bench with certified FAT. Through 67-km proximity to the pulp-and-paper cluster of Eunapolis, Santo Antônio do Jacinto inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Santo Antônio do Jacinto, Minas Gerais with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. For the Santo Antônio do Jacinto, Minas Gerais market, FB Bombas offers industrial pumps with certified hydraulic tests, ASME B73.1 (dimensional interchangeability) and a traceable Data Book per unit — a technical package that shortens the customer homologation cycle. The road network BR-381, BR-040, BR-262 and BR-116, with BR-381 Rodovia Fernão Dias as the main axis, defines response time for critical-part shipments and technical visits to Santo Antônio do Jacinto. Service to Santo Antônio do Jacinto is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (1046 km), with a technical team for selection, commissioning and replacement support.
Years
Compliant
Tested
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBEI gear pumps (FB Bombas) in Santo Antônio do Jacinto, Minas Gerais: sized for local industry, viscous fluids up to 350°C, API 676 compliance and in-house manufacturing in Cabreúva-SP at 1046 km. Typical critical-parts lead time: 72-96h.
The fluid roster in Santo Antônio do Jacinto (óleos industriais and água industrial) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. FB Bombas aftermarket support in Santo Antônio do Jacinto covers technical service, spare parts with traceable Data Book, scheduled preventive maintenance (PM) and full overhaul on a factory bench with certified FAT. Through 67-km proximity to the pulp-and-paper cluster of Eunapolis, Santo Antônio do Jacinto inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Santo Antônio do Jacinto, Minas Gerais with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers), API 610 engineered-to-order projects and a traceable Data Book on every unit shipped. For the Santo Antônio do Jacinto, Minas Gerais market, FB Bombas offers industrial pumps with certified hydraulic tests, ASME B73.1 (dimensional interchangeability) and a traceable Data Book per unit — a technical package that shortens the customer homologation cycle. The road network BR-381, BR-040, BR-262 and BR-116, with BR-381 Rodovia Fernão Dias as the main axis, defines response time for critical-part shipments and technical visits to Santo Antônio do Jacinto. Service to Santo Antônio do Jacinto is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (1046 km), with a technical team for selection, commissioning and replacement support.
Gear pump selection for Santo Antônio do Jacinto starts with viscosity at the real pumping temperature — not the 40 °C catalog figure — the typical case of óleos e água industrial. With that data, engineering defines speed (flow is proportional), bushing materials and the thermal arrangement: jacketed body for cold starts and a seal compatible with the hot fluid. Santo Antônio do Jacinto, near a papel-celulose cluster, deals with liquor circulation, white water, low-to-medium consistency stock pumps — a technical agenda well known to FB application engineering. In Santo Antônio do Jacinto, FBEI and FBCN cover the technical range observed in the field — from primary transfer and circulation to replacing an installed pump carrying the same ASME B73.1 dimensional designation. Before shipment to Santo Antônio do Jacinto, each pump is tested on a hydraulic bench with ISO 21940 G2.5 balancing — FB Bombas standard protocol.
Fluid-roster complexity in Santo Antônio do Jacinto is low — lean fluid roster — technical operation focused on few main vectors. Santo Antônio do Jacinto has a services-oriented economy (32.7% of value added, IBGE 2021; 2023 GDP of R$ 131 million) — in this profile, typical projects involve centrifugals for utilities, reservoirs and fire networks, with the FBCN as the reference series. The demand profile in Santo Antônio do Jacinto reflects medium density — regular and predictable opportunity pipeline. Santo Antônio do Jacinto: óleos industriais and água industrial. Each fluid defines a distinct set of pump requirements — flow, available NPSH, sealing strategy. For Santo Antônio do Jacinto, series FBEI for transferência geral and series FBCN for utilidades — initial reference for technical discussion with application engineering. white/black liquor circulation, recovery-boiler feed and low-to-medium consistency stock pumping: this is the typical application set around the papel-celulose cluster in which Santo Antônio do Jacinto sits.
Logistics lead time to Santo Antônio do Jacinto is 48-72h, with possible technical stop — variable with cargo type, season and specific optimizations. The BR-381 Rodovia Fernão Dias corridor (1046 km) is the logistics spine for FB deliveries to Santo Antônio do Jacinto — a factor entering FOB pricing and the commissioning lead-time curve. The factory-to-Santo Antônio do Jacinto logistics cycle begins with documented dispatch: invoice, packing list, test certificates and the equipment's technical manual.
Technical inquiry for the FBE series in Santo Antônio do Jacinto: real-curve sizing, material recommendation and sealing configuration. Direct service from the FB team.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Own factory in Cabreúva/SP with full production capability, serving Santo Antônio do Jacinto and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Santo Antônio do Jacinto and the entire Minas Gerais region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteFour catalog series, fire-fighting systems and engineered-to-order — in-house manufacturing and hydrostatic testing on 100% of pumps
Our technical team is ready to develop the ideal solution for your application
Contact Us
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for Santo Antônio do Jacinto
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from Santo Antônio do Jacinto — same series, same factory in Cabreúva/SP.
Yes. FB Bombas serves Santo Antônio do Jacinto and the entire surrounding region with supply, technical support and replacement parts directly from the factory in Cabreúva/SP. Support includes sizing at no cost and, for critical projects, on-site technical visits.
Application engineering starts from four variables — flow, differential pressure, temperature and viscosity — and refines with available NPSH, duty cycle and chemical compatibility. The study is free for customers in Santo Antônio do Jacinto and results in the exact model recommendation, not a generic family.
Yes. For stationary fire protection systems, FB Bombas produces pumps compliant with NFPA (National Fire Protection Association) and with ABNT's NBR 16704 — covering building and industrial projects that demand these certifications.
Yes. The entire metropolitan region and the microregions around Santo Antônio do Jacinto receive from FB Bombas the same technical support and logistics structure. With this regional reach, industrial plants spread across several cities are served in a coordinated manner.
It does. When a special application demands something beyond the standard portfolio, FB Bombas develops the solution: modified construction materials, specific sealing arrangements, system-integrated heating, skids, mobile assemblies and retrofit of existing installations. Engineering reviews each special project as a step prior to manufacturing.
Yes. The FBCN series complies with ASME B73.1 (North American standard for horizontal end-suction process centrifugal pumps) — which enables retrofit on existing baseplates in Santo Antônio do Jacinto plants, whoever manufactured the installed unit, provided the dimension designation matches. Shaft dimensions, suction/discharge flanges, casing feet and impeller centerline follow the standard: the complete FBCN pump goes in and piping and baseplate stay put.
Three fluid fronts are covered by the FB series. FBE: mineral and synthetic oils, asphalt (CAP), BPF fuel oils, petroleum derivatives, molasses, resins, viscous chemical and hydraulic products. FBCN: raw and treated water, process fluids and industrial effluents. FBOT: thermal oil at elevated temperatures. Fluid viscosity, temperature and chemical compatibility guide the sizing of every application.
It is. From the data of the pump in operation (flow, pressure, viscosity, temperature), FB Bombas' application engineering proposes a technical equivalence — dimensional or functional — with one of our series. This replacement has already been done by many clients in Santo Antônio do Jacinto, with benefits in lead time, cost and local support.
The advantages are concrete: faster delivery because nothing depends on imports; FB engineering providing direct technical support; spares secured by in-house parts manufacturing; local-currency pricing, free from exchange rate exposure; and physical presence on projects in Santo Antônio do Jacinto and surrounding areas. All from a company manufacturing in Brazil since 1944.
Since 1944 — over 82 years of continuous experience manufacturing industrial pumps. In Cabreúva/SP, the factory brings engineering, manufacturing and testing together under one roof, which assures total quality control on each unit shipped to Santo Antônio do Jacinto and all across Brazil.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
