Technical summary
The FBEI gear-pump line is specified in Alto Alegre, Roraima for arroz — flow and pressure set by the actual system curve. Cabreúva-SP factory (3302 km), API 676 and direct technical service from FB engineering.
FBE Gear Pumps
FBE Gear Pumps in Alto Alegre
The fluid roster in Alto Alegre (defensivos viscosos and água) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. Within IBGE mesoregion Norte de Roraima, Alto Alegre shares economic context with adjacent municipalities, shaping typical pump specifications and the frequency of synchronized maintenance campaigns. FB Bombas pumps installed in Alto Alegre, Roraima meet CRCC Petrobras certification, API 610 (centrifugal) and API 676 (gear) compliance — credentials FB has sustained as a Brazilian manufacturer since 1944. Alto Alegre is served by the BR-174 (via Manaus) axis and also by highways BR-174 and BR-401 for heavy-cargo movement — relevant for delivery of mounted skids and large pump-and-motor sets. Operations in arroz, agronegócio dominate the local production profile, defining the typical fluid catalogue and the FB series recommended for each application. Alto Alegre, in the top 10 by population in RR, offers scale for mid- and large-sized projects — from scheduled replacement to greenfield in regional industrial districts. FB Bombas technical service in Alto Alegre covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. Alto Alegre, Roraima is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 82 years of continuous operation. For the arroz industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras certification, API 610 / API 676 compliance and ASME B73.1 normalization — basis for retrofit in plants with global manufacturers already installed. From the Cabreúva-SP factory, 3302 km via BR-174 (via Manaus), FB Bombas reaches Alto Alegre with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Nationwide Service
3299km from factory
FBE Gear Pumps|Desde 1944
The fluid roster in Alto Alegre (defensivos viscosos and água) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. Within IBGE mesoregion Norte de Roraima, Alto Alegre shares economic context with adjacent municipalities, shaping typical pump specifications and the frequency of synchronized maintenance campaigns. FB Bombas pumps installed in Alto Alegre, Roraima meet CRCC Petrobras certification, API 610 (centrifugal) and API 676 (gear) compliance — credentials FB has sustained as a Brazilian manufacturer since 1944. Alto Alegre is served by the BR-174 (via Manaus) axis and also by highways BR-174 and BR-401 for heavy-cargo movement — relevant for delivery of mounted skids and large pump-and-motor sets. Operations in arroz, agronegócio dominate the local production profile, defining the typical fluid catalogue and the FB series recommended for each application. Alto Alegre, in the top 10 by population in RR, offers scale for mid- and large-sized projects — from scheduled replacement to greenfield in regional industrial districts. FB Bombas technical service in Alto Alegre covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. Alto Alegre, Roraima is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 82 years of continuous operation. For the arroz industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras certification, API 610 / API 676 compliance and ASME B73.1 normalization — basis for retrofit in plants with global manufacturers already installed. From the Cabreúva-SP factory, 3302 km via BR-174 (via Manaus), FB Bombas reaches Alto Alegre with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Coverage
Nationwide Service
Distance
3299km from factory
80+
Years
API
Certified
100%
Warranty
80+
Years in Market
CRCC
Petrobras Approved
27
States Served
API 610/676
Certified Pumps
Technical summary
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBE Gear Pumps Industrial in Alto Alegre
Local context
The fluid roster in Alto Alegre (defensivos viscosos and água) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. Within IBGE mesoregion Norte de Roraima, Alto Alegre shares economic context with adjacent municipalities, shaping typical pump specifications and the frequency of synchronized maintenance campaigns. FB Bombas pumps installed in Alto Alegre, Roraima meet CRCC Petrobras certification, API 610 (centrifugal) and API 676 (gear) compliance — credentials FB has sustained as a Brazilian manufacturer since 1944. Alto Alegre is served by the BR-174 (via Manaus) axis and also by highways BR-174 and BR-401 for heavy-cargo movement — relevant for delivery of mounted skids and large pump-and-motor sets. Operations in arroz, agronegócio dominate the local production profile, defining the typical fluid catalogue and the FB series recommended for each application. Alto Alegre, in the top 10 by population in RR, offers scale for mid- and large-sized projects — from scheduled replacement to greenfield in regional industrial districts. FB Bombas technical service in Alto Alegre covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. Alto Alegre, Roraima is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 82 years of continuous operation. For the arroz industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras certification, API 610 / API 676 compliance and ASME B73.1 normalization — basis for retrofit in plants with global manufacturers already installed. From the Cabreúva-SP factory, 3302 km via BR-174 (via Manaus), FB Bombas reaches Alto Alegre with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Technical solutions
In Alto Alegre, materials such as austenitic stainless steels (AISI 304/316) with attention to thermal expansion answer the requirements of defensivos viscosos and água — a combination that drives service life of casing, impeller, shaft and shaft sleeve, refined via corrosion analysis using removal rates (mpy). For sealing in Alto Alegre, single cartridge mechanical seal (Plan 11/13) for general service, upgradable to dual when the fluid requires secondary containment is a defensible starting point; final plan approval involves risk analysis of the specific fluid. Alto Alegre typically calls for FBEI and FBCN — an initial recommendation based on local productFit, dominant industrial cluster and identified fluid profile; final technical approval is refined by application engineering. Compliance with ASME B73.1 for horizontal normalized centrifugal pumps — consolidated market standard is part of the default scope for FB series recommended for Alto Alegre, with traceable test and materials documentation. Typical applications mapped for Alto Alegre include transferência em armazéns and irrigação de processo — each with its own requirements for NPSH, acceptable pulsation and start-up strategy. 100% of pumps bound for Alto Alegre pass through the Cabreúva-SP hydraulic bench — acceptance testing with multi-point curve readings and G2.5 dynamic balancing.
Why FB Bombas
In Alto Alegre, the low complexity index in the fluid mix sets lean fluid roster — technical operation focused on few main vectors — a factor adjusting both technical-spec depth and materials-catalogue scope. In Alto Alegre, low industrial density — typically standalone projects, without regional cumulative volume — a characteristic that sizes FB's commercial strategy: application-engineering coverage, visit cadence and depth of consignment stock. In Alto Alegre, logistics is a significant economic factor — order consolidation and integrated packages are recommended — a variable entering the decision between CIF/FOB freight, order consolidation and contractual delivery window. Alto Alegre ranks among the 10 largest cities in the state at relevant industrial scale — an input that defines commercial priority and relationship type (one-shot, annual program, master agreement). Typical fluids handled in Alto Alegre (defensivos viscosos and água) require careful selection of seal and coating materials — a central variable in pump sizing. Municipalities adjacent to Alto Alegre have relevant industrial activity, and FB Bombas typically covers multiple plants of that region in a single scheduled technical visit. Typical use cases identified for Alto Alegre: series FBEI for transferência em armazéns and series FBCN for irrigação de processo. Fire protection systems (NFPA 20 / ABNT NBR 16704) are a recurring application in industrial plants in Alto Alegre — scope covered by FB Bombas' FBFS line. arroz operations in Alto Alegre demand continuous pumping of process fluids, with preventive-maintenance windows aligned to plant scheduled outages.
Logistics & support
For Alto Alegre, 72h to 7 days, depending on modal and dry season is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. Cabreúva-SP → Alto Alegre via BR-174 (via Manaus) (3302 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. The BR-174 and BR-401 mesh provides logistics redundancy for Alto Alegre — when one route is restricted (rains, construction, accidents), delivery is rerouted without compromising the critical lead time. For Alto Alegre, FB service follows the technical visits planned as a mission — concentrated agenda to cover multiple plants in a single trip model — application engineers conduct pre-scheduled visits while remote support via documentation and phone covers point queries. For Alto Alegre, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
Request your proposal
For projects with FBE pumps in Alto Alegre, talk to FB application engineering: viscosity analysis, available NPSH, seal materials and operating regime — technical response within 24-48 business hours.
Talk to engineeringWhy FB Bombas
National leadership in industrial pumping
For over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Brazil Differentiators
Advantages for your Industrial Operation
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Complete National Coverage
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Brazil-Wide Logistics
Nationwide deliveries through partner carrier network with optimized lead times.
Dedicated Engineering
Technical team available for sizing, project work and after-sales support across any region.
Strategic Stock
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Discover FB Bombas
Own factory in Cabreúva/SP with full production capability, serving Alto Alegre and all of Brazil
Own Manufacturing
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
Custom Projects
We size and build complete systems, ready for installation at your industrial plant.
Replacement Parts
We keep original parts in stock for all series, ensuring continuity of your operation.
Industrial Production
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Alto Alegre and the entire Roraima region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteOur Product Line
Complete pumping solutions for all industrial needs
Need a Custom Solution?
Our technical team is ready to develop the ideal solution for your application
Contact Us
Industrial Capacity
Production line dedicated to industrial pumps
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
350°C
Max. Temp. FBOT
1,350 l/min
Max. Flow FBE
2,200 m³/h
Max. Flow FBCN
Companies that Trust FB Bombas
Present in the largest industrial projects in Brazil and Latin America
Explore by pump type
See specific solutions for Alto Alegre
Industrial Applications Served
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Pumps for Asphalt, Bitumen and Pitch: Technical Guide to Heated Transfer
Read technical guide
Pumps for Biodiesel and Renewable Fuels: Technical Guide to the Brazilian B100 Chain
Read technical guide
Fuel Transfer Pumps: Diesel, Gasoline, Ethanol, Heavy Fuel Oil and Aviation
Read technical guide
Pumps for Sugar-Ethanol Mills: Complete Technical Selection Guide
Read technical guide
Gear Pumps in Nearby Cities
Regional service from Alto Alegre — same series, same factory in Cabreúva/SP.
Frequently Asked Questions about Alto Alegre
Are FBCN pumps dimensionally compatible with global manufacturers already installed in Alto Alegre?
Are FBCN pumps dimensionally compatible with global manufacturers already installed in Alto Alegre?
Yes. The FBCN series follows ASME B73.1 normalization (North American dimensional standard for end-suction process pumps) — which makes the pump-and-motor set interchangeable with global manufacturers (KSB, Sulzer, Goulds, Flowserve) already installed in plants in Alto Alegre. For retrofits, the existing baseplate, suction/discharge piping and foundations are usually preserved; what changes is the rotating set. FB application engineering performs the dimensional gap analysis prior to supply.
Up to what temperature can FB Bombas pumps operate?
Up to what temperature can FB Bombas pumps operate?
Maximum temperature depends on the series: FBE and FBEI operate up to 350°C with heating jacket and special sealing; FBOT operates up to 350°C in thermal oil circuits; FBCN operates up to 250°C with proper materials and sealing. Correct sizing of sealing and materials is essential for safe operation.
What is the advantage of buying from a national manufacturer like FB Bombas?
What is the advantage of buying from a national manufacturer like FB Bombas?
Shorter delivery times (no import dependency), direct technical support from FB engineering, replacement parts with in-house manufacturing, prices in local currency (no exchange rate exposure) and on-site service for projects in Alto Alegre and surrounding areas. FB Bombas has been manufacturing in Brazil since 1944.
What is the warranty on FB pumps?
What is the warranty on FB pumps?
FB pumps are supplied with a warranty against manufacturing defects according to the terms detailed in the commercial proposal. The warranty assumes installation, operation and maintenance within the parameters specified in the manual and sizing performed by engineering. Consult our technical team for specific details of your project in Alto Alegre.
Are FB pumps easy to maintain?
Are FB pumps easy to maintain?
Yes. The FBE and FBCN lines were designed with easy access to wear-prone components, allowing disassembly and inspection with conventional tools. Detailed technical manuals and direct factory replacement parts availability simplify maintenance routines.
What is the balancing grade of FB pumps for critical projects in Alto Alegre?
What is the balancing grade of FB pumps for critical projects in Alto Alegre?
The FB Bombas rotating set is balanced per ISO 21940 G2.5 (a balancing grade equivalent to API 610 requirements for heavy-duty service) — required for critical projects in Alto Alegre with continuous regime, plants with online vibration monitoring or applications with high cost of unplanned downtime. For machines running above 3,600 RPM or with rotating mass over 50 kg, balancing is performed on two planes with a piezoelectric sensor.
Does FB Bombas offer technical training for operators in Alto Alegre?
Does FB Bombas offer technical training for operators in Alto Alegre?
Yes. FB Bombas offers technical training for operations and maintenance teams in Alto Alegre, with modules on: sizing and reading the characteristic curve, identifying cavitation through NPSH, mechanical-seal troubleshooting, laser alignment, ISO 10816 vibration analysis and PM (preventive maintenance) practice with bearing and wear-ring replacement. Training can be delivered at the customer plant or at the Cabreúva/SP factory, in person or hybrid.
How do I contact FB Bombas’ technical team?
How do I contact FB Bombas’ technical team?
Contact can be made via WhatsApp at +55 11 97287-4837, email comercial@fbbombas.com.br or through the form on our website. Technical response is prioritized on the same business day, with direct reply from the application engineering team.
Do FBCN pumps follow ASME B73.1 dimensional compliance?
Do FBCN pumps follow ASME B73.1 dimensional compliance?
Yes. The FBCN series complies with ASME B73.1 (North American standard for horizontal end-suction process centrifugal pumps) — a feature that enables dimensional retrofit on existing baseplates in Alto Alegre plants originally equipped with KSB, Sulzer, Goulds or Flowserve. Shaft dimensions, suction/discharge flanges, casing feet and impeller centerline follow the standard; the rotating set is swapped without changing piping or baseplate.
Does FB Bombas serve cities neighboring Alto Alegre?
Does FB Bombas serve cities neighboring Alto Alegre?
Yes. FB Bombas serves the entire metropolitan region and microregions neighboring Alto Alegre with the same technical support and logistics structure. This regional reach allows serving industrial plants distributed across multiple cities in a coordinated way.
Need gear or centrifugal pumps in Alto Alegre?
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
Talk to us
WhatsApp
+55 11 97287-4837
Reply during business hours
Phone
+55 11 4898-9200
Mon–Fri · 8 a.m.–5 p.m.
E-mail
comercial@fbbombas.com.br
Sales
Factory
Cabreúva — SP
Av. Adolpho João Traldi, 80
