Technical summary
For viscous fluids in metalurgia (São Marcos, Rio Grande do Sul), FB application engineering recommends FBEI as a starting point. API 676 compliance, vertically integrated manufacturing in Cabreúva-SP, 72-96h lead time.
FBE Gear Pumps
FBE Gear Pumps in São Marcos
The fluid roster in São Marcos (óleos hidráulicos, fluidos de corte and água industrial) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. São Marcos's industrial profile centers on Metalurgia and Móveis — sectors with specific pumping demands that FB Bombas meets with dedicated product series. Metalurgia operations in São Marcos map to the FB Bombas FBOT series. The FBOT series is ideal for thermal oil systems in metallurgical processes requiring precise temperature control. Certified characteristic curve covers Precise flow control, Low NPSH required, Special materials. Through 105-km proximity to the refining cluster of Canoas, São Marcos inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. For projects in São Marcos that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. FB Bombas is a Brazilian manufacturer of industrial pumps serving São Marcos, Rio Grande do Sul, with the FBOT series applied to the metalurgia sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and qualification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. FB Bombas serves São Marcos with a complete aftermarket package for FB pumps — factory spare parts, preventive maintenance, vibration troubleshooting (ISO 10816 analysis), ISO 21940 G2.5 balancing and replacement of a normalized pump on the existing ASME B73.1 baseplate. Logistically, the city connects to Cabreúva-SP via BR-116 (via Régis Bittencourt até PR/SC), complemented by alternatives BR-116, BR-290 and BR-101 — a network that supports technical service within tight operational windows. Proximity between São Marcos and Flores Da Cunha, Caxias Do Sul and Antonio Prado enables joint routing of technical visits — operational efficiency that translates into shorter response times. Based in Cabreúva-SP at 742 km via BR-116 (via Régis Bittencourt até PR/SC), FB Bombas delivers to São Marcos industrial pumps manufactured in-house since 1944 plus continuous technical support.
Nationwide Service
753km from factory
FBE Gear Pumps|Desde 1944
The fluid roster in São Marcos (óleos hidráulicos, fluidos de corte and água industrial) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. São Marcos's industrial profile centers on Metalurgia and Móveis — sectors with specific pumping demands that FB Bombas meets with dedicated product series. Metalurgia operations in São Marcos map to the FB Bombas FBOT series. The FBOT series is ideal for thermal oil systems in metallurgical processes requiring precise temperature control. Certified characteristic curve covers Precise flow control, Low NPSH required, Special materials. Through 105-km proximity to the refining cluster of Canoas, São Marcos inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. For projects in São Marcos that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. FB Bombas is a Brazilian manufacturer of industrial pumps serving São Marcos, Rio Grande do Sul, with the FBOT series applied to the metalurgia sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and qualification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. FB Bombas serves São Marcos with a complete aftermarket package for FB pumps — factory spare parts, preventive maintenance, vibration troubleshooting (ISO 10816 analysis), ISO 21940 G2.5 balancing and replacement of a normalized pump on the existing ASME B73.1 baseplate. Logistically, the city connects to Cabreúva-SP via BR-116 (via Régis Bittencourt até PR/SC), complemented by alternatives BR-116, BR-290 and BR-101 — a network that supports technical service within tight operational windows. Proximity between São Marcos and Flores Da Cunha, Caxias Do Sul and Antonio Prado enables joint routing of technical visits — operational efficiency that translates into shorter response times. Based in Cabreúva-SP at 742 km via BR-116 (via Régis Bittencourt até PR/SC), FB Bombas delivers to São Marcos industrial pumps manufactured in-house since 1944 plus continuous technical support.
Coverage
Nationwide Service
Distance
753km from factory
80+
Years
API
Compliant
100%
Tested
80+
Years in Market
CRCC
Petrobras Approved
27
States Served
API 610/676
Certified Pumps
Technical summary
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBE Gear Pumps Industrial in São Marcos
Local context
The fluid roster in São Marcos (óleos hidráulicos, fluidos de corte and água industrial) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. São Marcos's industrial profile centers on Metalurgia and Móveis — sectors with specific pumping demands that FB Bombas meets with dedicated product series. Metalurgia operations in São Marcos map to the FB Bombas FBOT series. The FBOT series is ideal for thermal oil systems in metallurgical processes requiring precise temperature control. Certified characteristic curve covers Precise flow control, Low NPSH required, Special materials. Through 105-km proximity to the refining cluster of Canoas, São Marcos inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. For projects in São Marcos that demand formal technical qualification, FB Bombas series cover ASME B73.1 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. FB Bombas is a Brazilian manufacturer of industrial pumps serving São Marcos, Rio Grande do Sul, with the FBOT series applied to the metalurgia sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and qualification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. FB Bombas serves São Marcos with a complete aftermarket package for FB pumps — factory spare parts, preventive maintenance, vibration troubleshooting (ISO 10816 analysis), ISO 21940 G2.5 balancing and replacement of a normalized pump on the existing ASME B73.1 baseplate. Logistically, the city connects to Cabreúva-SP via BR-116 (via Régis Bittencourt até PR/SC), complemented by alternatives BR-116, BR-290 and BR-101 — a network that supports technical service within tight operational windows. Proximity between São Marcos and Flores Da Cunha, Caxias Do Sul and Antonio Prado enables joint routing of technical visits — operational efficiency that translates into shorter response times. Based in Cabreúva-SP at 742 km via BR-116 (via Régis Bittencourt até PR/SC), FB Bombas delivers to São Marcos industrial pumps manufactured in-house since 1944 plus continuous technical support.
Technical solutions
In viscous fluid services in São Marcos, the FBE works where centrifugals lose efficiency: gear volumetric efficiency improves with viscosity, covering up to 100,000 SSU and 350 °C with a heating jacket — the typical case of óleos hidráulicos e lubrificantes. The design counterpart is mandatory — a discharge line protected by a relief valve, because positive displacement does not tolerate blockage. Material selection for óleos hidráulicos, fluidos de corte and água industrial in São Marcos considers cast iron with proper coating or stainless steels when the fluid requires — a specification FB Bombas details on a matweb sheet after fluid chemical analysis. The refino cluster near São Marcos brings a technical agenda of crude oil, derivatives, high temperature (up to 260°C in FBCN, 350°C in FBOT) and API 610 requirements met via engineered-to-order projects — a reference FB Bombas uses as a benchmark for initial sizing and series selection. dual cartridge mechanical seal (API 682 Plan 53A/53B) for hazardous or high-temperature fluids is the initial sealing configuration for São Marcos; secondary-plan adjustments and dual cartridges are considered based on fluid criticality and environmental requirement. São Marcos typically calls for FBEI and FBCN+FBOT — an initial recommendation based on local productFit, dominant industrial cluster and identified fluid profile; final technical approval is refined by application engineering. The hidráulica industrial and resfriamento de moldes set accounts for a large share of industrial demand in São Marcos; FB Bombas keeps documented history of analogous applications for sizing benchmarks. The pump-and-motor set shipped to São Marcos undergoes bench hydraulic testing and G2.5 dynamic balancing (ISO 21940), with a traceable report.
Why FB Bombas
Fluid-roster complexity in São Marcos is medium — moderate fluid roster — concentration in a few main technical categories. São Marcos has a factory-floor economy: 43% of municipal value added is industrial (IBGE, 2021), over a 2023 GDP of R$ 1.5 billion. This profile concentrates demand on process pumps and maintenance contracts with fast parts replacement. Typical seasonality of the refino cluster (scheduled outages every 3-5 years (turnaround) — synchronized demand peaks across the supply chain) directly impacts supply scheduling and PMs in São Marcos. São Marcos has a specific regional profile, with industrial demand sized to its scale — a feature that enters the sizing of the service strategy. The demand profile in São Marcos reflects medium density — regular and predictable opportunity pipeline. In São Marcos, óleos hidráulicos, fluidos de corte and água industrial form the typical fluid set — guiding both series selection (gear, centrifugal, thermal oil) and constructive detail (closed/open/semi-open impeller). In São Marcos, an active industrial neighborhood enables freight consolidation and technical-visit routing — operational efficiency reflected in shorter lead times. For São Marcos, the FBFS line offers a complete fire-protection package: main pump, jockey, control panel NFPA 20 and diesel fuel tank — scope per NFPA 20. São Marcos shows cases like series FBEI for hidráulica industrial and series FBCN+FBOT for resfriamento de moldes — a package FB Bombas addresses with real-curve sizing, material recommendation and dimensioned seal configuration. In São Marcos, metalurgia accounts for a large share of the pumping load — combining utility lines (water, steam, compressed air) with dedicated process circuits. In São Marcos, near a refino cluster, applications such as crude transfer, distillation-tower circulation, charge pumps for reactors and movement of derivatives make up the operational agenda — each backed by technical references in the FBE/FBCN/FBOT catalogues.
Logistics & support
Typical transit time to São Marcos: 48-72h, with possible technical stop — the window used in FB Bombas' standard commercial commitment. For large sets (skids, motors above 200 hp) destined to São Marcos, transport uses platform trailers with escort when required by gauge. Beyond the main route, São Marcos is accessible via BR-116, BR-290 and BR-101 — options that provide redundancy in case of blockages or restricted operating windows. Technical-service coverage for São Marcos involves technical visits scheduled in advance, optimizing the specialized team's travel. The main logistics axis between Cabreúva-SP and São Marcos is BR-116 (via Régis Bittencourt até PR/SC), totaling 742 km — a route that sets the default delivery time for finished equipment. Dispatch from the Cabreúva-SP factory to São Marcos occurs after bench hydraulic testing and Data Book verification — mandatory steps in FB's quality control.
Request your proposal
FB engineers serve São Marcos for the FBE series with a sized proposal — duty point, fluid, field conditions and supply lead time.
Talk to engineeringWhy FB Bombas
National leadership in industrial pumping
For over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Brazil Differentiators
Advantages for your Industrial Operation
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Complete National Coverage
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Brazil-Wide Logistics
Nationwide deliveries through partner carrier network with optimized lead times.
Dedicated Engineering
Technical team available for sizing, project work and after-sales support across any region.
Strategic Stock
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Discover FB Bombas
Own factory in Cabreúva/SP with full production capability, serving São Marcos and all of Brazil
Own Manufacturing
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
Custom Projects
We size and build complete systems, ready for installation at your industrial plant.
Replacement Parts
We keep original parts in stock for all series, ensuring continuity of your operation.
Industrial Production
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves São Marcos and the entire Rio Grande do Sul region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteOur Product Line
Four catalog series, fire-fighting systems and engineered-to-order — in-house manufacturing and hydrostatic testing on 100% of pumps
Need a Custom Solution?
Our technical team is ready to develop the ideal solution for your application
Contact Us
Industrial Capacity
Production line dedicated to industrial pumps
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
350°C
Max. Temp. FBOT
1,350 l/min
Max. Flow FBE (standard line)
2,200 m³/h
Max. Flow FBCN
Companies that Trust FB Bombas
Present in the largest industrial projects in Brazil and Latin America
Explore by pump type
See specific solutions for São Marcos
Industrial Applications Served
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Pumps for Asphalt, Bitumen and Pitch: Technical Guide to Heated Transfer
Read technical guide
Pumps for Biodiesel and Renewable Fuels: Technical Guide to the Brazilian B100 Chain
Read technical guide
Fuel Transfer Pumps: Diesel, Gasoline, Ethanol, Heavy Fuel Oil and Aviation
Read technical guide
Pumps for Sugar-Ethanol Mills: Complete Technical Selection Guide
Read technical guide
Gear Pumps in Nearby Cities
Regional service from São Marcos — same series, same factory in Cabreúva/SP.
Frequently Asked Questions about São Marcos
Does FB Bombas serve fire protection systems?
Does FB Bombas serve fire protection systems?
Yes. For stationary fire protection systems, FB Bombas produces pumps compliant with NFPA (National Fire Protection Association) and with ABNT's NBR 16704 — covering building and industrial projects that demand these certifications.
Can FB Bombas pumps be financed via BNDES / FINAME in São Marcos?
Can FB Bombas pumps be financed via BNDES / FINAME in São Marcos?
Yes. As a Brazilian manufacturer accredited in FINAME — the BNDES Special Industrial Financing Agency —, FB Bombas qualifies equipment supplied to São Marcos for BNDES Finame financing lines (Industrial Working Capital, Modernization, Capital Goods), with preferential conditions for national industry. On the technical proposal, the commercial team includes the product's FINAME code to enter the customer's financial plan.
Which pump does FB recommend for water and utilities in São Marcos?
Which pump does FB recommend for water and utilities in São Marcos?
For water, condensate and low-viscosity fluids, the recommendation is the FBCN standardized centrifugal — 53 models with bench-tested curves and back-pull-out maintenance, which frees the rotating assembly without dismantling the piping. The exact model comes from the circuit’s flow × head pair.
What is the warranty on FB pumps?
What is the warranty on FB pumps?
FB pumps are supplied with a warranty against manufacturing defects according to the terms detailed in the commercial proposal. The warranty assumes installation, operation and maintenance within the parameters specified in the manual and sizing performed by engineering. Consult our technical team for specific details of your project in São Marcos.
Are FB pumps easy to maintain?
Are FB pumps easy to maintain?
Yes. The FBE and FBCN lines were designed with easy access to wear-prone components, allowing disassembly and inspection with conventional tools. Detailed technical manuals and direct factory replacement parts availability simplify maintenance routines.
Does the FBOT series serve thermal oil applications in São Marcos?
Does the FBOT series serve thermal oil applications in São Marcos?
Yes. FBOT is FB Bombas’ specific centrifugal pump for thermal oil circuits, operating at elevated temperatures with fluids like Therminol, Dowtherm and similar. Material and sealing selection is done according to the maximum operating temperature and type of thermal oil.
Is FB Bombas a national alternative to imported manufacturers in São Marcos?
Is FB Bombas a national alternative to imported manufacturers in São Marcos?
Yes. With a factory in Cabreúva/SP and a technical team dedicated to projects in São Marcos, FB Bombas has manufactured industrial pumps in Brazil since 1944. Applications currently running on imported equipment are covered by the FBCN (centrifugal), FBE/FBEI (gear) and FBOT (thermal oil) series — adding advantages in lead time (no import), factory-direct technical support, spare parts for FB pumps and application engineering that works in Portuguese. In a normalized-line retrofit, the interchangeability set out in ASME B73.1 holds between units of the same standard dimension designation, whatever the original supplier.
Does FB Bombas have a representative in São Marcos?
Does FB Bombas have a representative in São Marcos?
In São Marcos, service comes directly from the factory in Cabreúva/SP, through the FB Bombas team. The customer speaks with application engineering for sizing, receives the complete technical quotation within 3-5 business days and buys original parts at factory pricing. When project criticality warrants it, on-site technical visits to São Marcos are scheduled.
What is the emergency spare-parts lead time to São Marcos?
What is the emergency spare-parts lead time to São Marcos?
When there is a plant shutdown in São Marcos, FB Bombas triggers an emergency flow dedicated to critical parts (mechanical seal, impeller, shaft, wear ring, bearings): the order gets pre-invoicing, dispatch is prioritized and the modal can change — express road or air, decided by distance and criticality. The region defines the typical lead time, with a window negotiable for each case. For those with an installed base and scheduled PM, there is the option of consigning part of the stock at the plant.
Does FB Bombas serve cities neighboring São Marcos?
Does FB Bombas serve cities neighboring São Marcos?
Yes. FB Bombas serves the entire metropolitan region and microregions neighboring São Marcos with the same technical support and logistics structure. This regional reach allows serving industrial plants distributed across multiple cities in a coordinated way.
Need gear or centrifugal pumps in São Marcos?
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
Talk to usMon–Fri 8 a.m.–5 p.m.