Technical summary
The FBEI gear-pump line is specified in Erechim, Rio Grande do Sul for alimentos — flow and pressure set by the actual system curve. Cabreúva-SP factory (705 km), API 676 and direct technical service from FB engineering.
FBE Gear Pumps
FBE Gear Pumps in Erechim
The fluid roster in Erechim (óleos comestíveis, óleos hidráulicos, fluidos de corte and água de processo) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. Road access runs via BR-116 (via Régis Bittencourt até PR/SC), with branches through BR-116, BR-290 and BR-101 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. In Erechim, Rio Grande do Sul, FB Bombas serves alimentos projects with the FBCN series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). In Erechim, Alimentos and Metalurgia concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. Alimentos operations in Erechim map to the FB Bombas FBCN series. FBCN centrifugal pumps with sanitary materials for food processing, process water and utilities. Certified characteristic curve covers 316L stainless steel available, Easy sanitization, Sanitary mechanical seal. FB Bombas technical service in Erechim covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The city sits within the IBGE mesoregion Noroeste Rio-grandense, a regional grouping of municipalities with similar economic and logistics profiles — useful for comparative analysis and technical-visit routing. Only 263 km from the petrochemical cluster of Triunfo, Erechim benefits from logistics spillover and movement of technical professionals — FB Bombas has a service track record in the region. For projects in Erechim that demand formal technical qualification, FB Bombas series cover API 610 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Service to Erechim is coordinated from the Cabreúva-SP factory, route BR-116 (via Régis Bittencourt até PR/SC) (705 km), with a technical team for selection, commissioning and replacement support.
Nationwide Service
715km from factory
FBE Gear Pumps|Desde 1944
The fluid roster in Erechim (óleos comestíveis, óleos hidráulicos, fluidos de corte and água de processo) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. Road access runs via BR-116 (via Régis Bittencourt até PR/SC), with branches through BR-116, BR-290 and BR-101 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. In Erechim, Rio Grande do Sul, FB Bombas serves alimentos projects with the FBCN series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). In Erechim, Alimentos and Metalurgia concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. Alimentos operations in Erechim map to the FB Bombas FBCN series. FBCN centrifugal pumps with sanitary materials for food processing, process water and utilities. Certified characteristic curve covers 316L stainless steel available, Easy sanitization, Sanitary mechanical seal. FB Bombas technical service in Erechim covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The city sits within the IBGE mesoregion Noroeste Rio-grandense, a regional grouping of municipalities with similar economic and logistics profiles — useful for comparative analysis and technical-visit routing. Only 263 km from the petrochemical cluster of Triunfo, Erechim benefits from logistics spillover and movement of technical professionals — FB Bombas has a service track record in the region. For projects in Erechim that demand formal technical qualification, FB Bombas series cover API 610 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Service to Erechim is coordinated from the Cabreúva-SP factory, route BR-116 (via Régis Bittencourt até PR/SC) (705 km), with a technical team for selection, commissioning and replacement support.
Coverage
Nationwide Service
Distance
715km from factory
80+
Years
API
Certified
100%
Warranty
80+
Years in Market
CRCC
Petrobras Approved
27
States Served
API 610/676
Certified Pumps
Technical summary
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBE Gear Pumps Industrial in Erechim
Local context
The fluid roster in Erechim (óleos comestíveis, óleos hidráulicos, fluidos de corte and água de processo) demands attention to viscosity, operating temperature and chemical compatibility — variables that FB application engineering uses to recommend the proper series. Road access runs via BR-116 (via Régis Bittencourt até PR/SC), with branches through BR-116, BR-290 and BR-101 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. In Erechim, Rio Grande do Sul, FB Bombas serves alimentos projects with the FBCN series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). In Erechim, Alimentos and Metalurgia concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. Alimentos operations in Erechim map to the FB Bombas FBCN series. FBCN centrifugal pumps with sanitary materials for food processing, process water and utilities. Certified characteristic curve covers 316L stainless steel available, Easy sanitization, Sanitary mechanical seal. FB Bombas technical service in Erechim covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. The city sits within the IBGE mesoregion Noroeste Rio-grandense, a regional grouping of municipalities with similar economic and logistics profiles — useful for comparative analysis and technical-visit routing. Only 263 km from the petrochemical cluster of Triunfo, Erechim benefits from logistics spillover and movement of technical professionals — FB Bombas has a service track record in the region. For projects in Erechim that demand formal technical qualification, FB Bombas series cover API 610 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Service to Erechim is coordinated from the Cabreúva-SP factory, route BR-116 (via Régis Bittencourt até PR/SC) (705 km), with a technical team for selection, commissioning and replacement support.
Technical solutions
FBCN centrifugal pumps with flow up to 2,200 m³/h, head up to 138 m and temperature up to 260°C (thermal oil via FBOT up to 350°C) is the operating window initially considered for Erechim — the final curve is finalized after piping-network analysis (head loss, geometric head, required vs. available NPSH). Technical fit in Erechim points to FBEI and FBCN+FBOT as the series suitable for typical local operations — a baseline recommendation; the final specification depends on the specific process parameters. Erechim: óleos comestíveis, óleos hidráulicos and fluidos de corte suggest materials such as cast iron with proper coating or stainless steels when the fluid requires — a choice impacting both durability and cost of the pump-and-motor set. Compliance with API 610 (12th ed.) for centrifugal and API 676 for positive displacement, a typical requirement in downstream Oil & Gas projects is part of the default scope for FB series recommended for Erechim, with traceable test and materials documentation. In Erechim, influence from the petroquimico cluster translates into fluids with variable viscosity, vapor presence, light hydrocarbons and the need for dual cartridge seals — variables that enter both preliminary sizing and the selection of materials and constructive configurations. Erechim: transferência de óleos, hidráulica industrial, pasteurização and limpeza CIP. This application mix is covered by the recommended FB series, with case-by-case fine tuning. Erechim receives equipment after hydraulic testing and ISO 21940 G2.5 balancing — traceable report attached to the Data Book.
Why FB Bombas
Fluid-roster complexity in Erechim is high — diversified fluid roster — requires a broad catalogue of materials and sealing configurations. The industrial-pump market in Erechim coexists with traditional suppliers; FB Bombas differentiates itself through Brazilian manufacturing since 1944, Petrobras CRCC and engineered-to-order customization capability. Erechim belongs to the set of cities with relevant industrial scale in the state — a feature that enters the sizing of the service strategy. Typical seasonality of the petroquimico cluster (continuous operation with triennial outages (TPM) — moments of concentrated demand for retrofitted equipment) directly impacts supply scheduling and PMs in Erechim. The demand profile in Erechim reflects very high industrial concentration — territory for multi-customer technical-visit campaigns. Working with óleos comestíveis, óleos hidráulicos and fluidos de corte in Erechim demands attention to viscosity at operating temperature, residual abrasiveness and chemical compatibility — criteria FB engineering applies on every project. Erechim among the 50 most populous cities in RS, maintains a relevant industrial base — a scale that translates into regular demand for rotating equipment. Erechim is part of an active operational neighborhood, with maintenance and replacement flows that benefit from optimized regional logistics. In Erechim, alimentos plants concentrate recurring demand for centrifugal pumps for utilities and positive-displacement pumps for viscous fluids. In Erechim, series FBEI for transferência de óleos and hidráulica industrial and series FBCN+FBOT for pasteurização and limpeza CIP — a combination that covers the typical local industrial demand. Due to proximity to the petroquimico cluster, Erechim shares a technical agenda with cracking, hydrocarbon transfer, fractionation tower recirculation and oily-water pumping — a direct path to series and materials selection.
Logistics & support
Logistics lead time to Erechim is 48-72h, with possible technical stop — variable with cargo type, season and specific optimizations. In Erechim, FB Bombas structures a spare-parts program tailored to the operation profile — class-A items on consignment, class-B on scheduled order and class-C on demand. For Erechim, FB service follows the technical visits scheduled in advance, optimizing the specialized team's travel model — application engineers conduct pre-scheduled visits while remote support via documentation and phone covers point queries. Alternative routing to Erechim can use BR-116, BR-290 and BR-101, which helps in heavy-traffic situations or maintenance on specific roads. 705 km separate the Cabreúva-SP factory from Erechim via BR-116 (via Régis Bittencourt até PR/SC) — an axis sized for movement of pumps, skids and pump-and-motor sets. For Erechim, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
Request your proposal
For projects with FBE pumps in Erechim, talk to FB application engineering: viscosity analysis, available NPSH, seal materials and operating regime — technical response within 24-48 business hours.
Talk to engineeringWhy FB Bombas
National leadership in industrial pumping
For over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Brazil Differentiators
Advantages for your Industrial Operation
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Complete National Coverage
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Brazil-Wide Logistics
Nationwide deliveries through partner carrier network with optimized lead times.
Dedicated Engineering
Technical team available for sizing, project work and after-sales support across any region.
Strategic Stock
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Discover FB Bombas
Own factory in Cabreúva/SP with full production capability, serving Erechim and all of Brazil
Own Manufacturing
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
Custom Projects
We size and build complete systems, ready for installation at your industrial plant.
Replacement Parts
We keep original parts in stock for all series, ensuring continuity of your operation.
Industrial Production
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Erechim and the entire Rio Grande do Sul region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteOur Product Line
Soluções completas em bombeamento industrial com tecnologia de ponta
Need a Custom Solution?
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Industrial Capacity
Production line dedicated to industrial pumps
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
350°C
Max. Temp. FBOT
1,350 l/min
Max. Flow FBE
2,200 m³/h
Max. Flow FBCN
Companies that Trust FB Bombas
Present in the largest industrial projects in Brazil and Latin America
Explore by pump type
See specific solutions for Erechim
Industrial Applications Served
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Pumps for Asphalt, Bitumen and Pitch: Technical Guide to Heated Transfer
Read technical guide
Pumps for Biodiesel and Renewable Fuels: Technical Guide to the Brazilian B100 Chain
Read technical guide
Fuel Transfer Pumps: Diesel, Gasoline, Ethanol, Heavy Fuel Oil and Aviation
Read technical guide
Pumps for Sugar-Ethanol Mills: Complete Technical Selection Guide
Read technical guide
Gear Pumps in Nearby Cities
Regional service from Erechim — same series, same factory in Cabreúva/SP.
Frequently Asked Questions about Erechim
Contact can be made via WhatsApp at +55 11 97287-4837, email comercial@fbbombas.com.br or through the form on our website. Technical response is prioritized on the same business day, with direct reply from the application engineering team.
Yes. FB Bombas offers technical training for operations and maintenance teams in Erechim, with modules on: sizing and reading the characteristic curve, identifying cavitation through NPSH, mechanical-seal troubleshooting, laser alignment, ISO 10816 vibration analysis and PM (preventive maintenance) practice with bearing and wear-ring replacement. Training can be delivered at the customer plant or at the Cabreúva/SP factory, in person or hybrid.
Yes. FB Bombas offers retrofit of existing installations, including seal upgrades, replacement of worn components, adaptation for new fluids and hydraulic performance improvement. The assessment is based on a technical report of the current installation.
To receive a technical quote for industrial pumps in Erechim, send via website form, WhatsApp +55 11 97287-4837 or email comercial@fbbombas.com.br the application data: fluid (name + viscosity at operating temperature), target flow (m³/h), discharge head (m), available NPSH, operating temperature and regime (continuous or intermittent). Application engineering responds with a preliminary technical proposal, characteristic curve, suggested materials and delivery lead time.
Yes. FB Bombas is a Brazilian manufacturer accredited in FINAME (BNDES Special Industrial Financing Agency), which qualifies equipment supplied to Erechim for BNDES Finame financing lines (Industrial Working Capital, Modernization, Capital Goods) with preferential conditions for national industry. The commercial team provides the product FINAME code on the technical proposal for inclusion in the customer financial plan.
Yes. FB Bombas’ application engineering analyzes the installed pump specifications (flow, pressure, viscosity, temperature) and proposes dimensional or functional technical equivalence with one of our series. Many clients in Erechim have already made this replacement with gains in lead time, cost and local support.
Yes. The FBCN series follows ASME B73.1 normalization (North American dimensional standard for end-suction process pumps) — which makes the pump-and-motor set interchangeable with global manufacturers (KSB, Sulzer, Goulds, Flowserve) already installed in plants in Erechim. For retrofits, the existing baseplate, suction/discharge piping and foundations are usually preserved; what changes is the rotating set. FB application engineering performs the dimensional gap analysis prior to supply.
FB Bombas manufactures three major lines: FBE (external gear) for viscous fluids, FBEI (internal gear) for lubricating fluids, FBCN (normalized centrifugal) for water and low-viscosity fluids, and FBOT (specific centrifugal) for thermal oil circuits. We also serve fire protection systems in compliance with NFPA and NBR 16704.
Yes. FBOT is FB Bombas’ specific centrifugal pump for thermal oil circuits, operating at elevated temperatures with fluids like Therminol, Dowtherm and similar. Material and sealing selection is done according to the maximum operating temperature and type of thermal oil.
Yes. FB Bombas serves Erechim and the entire surrounding region with supply, technical support and replacement parts directly from the factory in Cabreúva/SP. Support includes sizing at no cost and, for critical projects, on-site technical visits.
Need gear or centrifugal pumps in Erechim?
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
Talk to us
WhatsApp
+55 11 97287-4837
Reply during business hours
Phone
+55 11 4898-9200
Mon–Fri · 8 a.m.–5 p.m.
E-mail
comercial@fbbombas.com.br
Sales
Factory
Cabreúva — SP
Av. Adolpho João Traldi, 80
