I have a series or model
Review the equipment, dimensions and family documentation. For replacement, also provide the identification of your existing pump.
View the catalog
100%Brazilian company
Gear pumps for projects in
Direct service from our factory in Cabreúva, Brazil. Explore FB Bombas series and tell us what your operation needs to transfer or circulate.
Start with your requirements
Do you already know the pump or need help defining it? Choose the next step for your industrial project.
I need to select a pump
Tell us which fluid you need to transfer or circulate and how the pump will be used. You can start the conversation without all the technical details.
Describe my applicationSeries for your process
Selection depends on the fluid and operating conditions. Location identifies the project and delivery destination.
FBE Series
External Gear Pumps
External gear pumps for viscous fluid transfer. Check size-specific limits and availability with our sales team.
Explore models
FBEI Series
Internal Gear Pumps
Internal gear pumps for viscous fluid transfer. Review the configuration, materials and series documentation.
Explore modelsInformation for your project
Application context and points to confirm during technical and commercial review.
Initial guidance
For projects in Castelo do Piauí, Piauí, FB Bombas provides service from its factory in Cabreúva, Brazil. FBE external gear pumps and FBEI internal gear pumps have their own documentation and operating conditions. Provide the fluid, viscosity at operating temperature and any known flow and pressure data. The team reviews the appropriate configuration.
Industrial context
Identify the fluid by its trade name and available composition. Add viscosity at operating temperature, solids content and startup conditions. These data allow materials and sealing to be assessed before the configuration is confirmed.
Delivery planning for Castelo do Piauí needs the full address and plant access restrictions. Surrounding roads help locate the project, but the cargo route, carrier and timing must be confirmed when contracting transport.
State whether the requirement is an expansion, new installation or equipment replacement. For replacement, pump identification and its dimensional drawing help check the duty point and existing interfaces.
Technical criteria
For gear pumps in Castelo do Piauí, review FBE external gear pumps and FBEI internal gear pumps separately. Their models, drives and limits are not interchangeable; provide viscosity at startup and operating temperatures to assess the configuration.
The project location in Castelo do Piauí does not determine the pump series. Compare families by fluid and process, then confirm selection using flow, pressure or head, temperature, viscosity and installation conditions.
If the project in Castelo do Piauí requires testing or witnessed inspection, specify test points, acceptance criteria and required reports in the purchase requirements. The team confirms capability and scope before supply, according to the series and configuration.
Applications and operation
For economic context, IBGE records GDP of R$ 235 million for Castelo do Piauí in 2023. In the 2021 gross value added breakdown, industry accounts for approximately 6.8% and agriculture for approximately 13.2%. Reference years differ because the 2022–2023 publication does not include a sector breakdown. These data describe the municipality; pumping requirements need to be specified for your plant’s process.
For fluids with varying properties in the process in Castelo do Piauí, provide composition, temperature and viscosity ranges plus startup and cleaning conditions. Identify each product that will pass through the assembly to guide the review of materials, sealing and drive.
If the operation in Castelo do Piauí uses different fluids, record composition, viscosity, temperature and solids content separately for each circuit. Compatibility with one product does not establish that the pump will serve every other plant process.
To describe the industrial application in Castelo do Piauí, identify the process stage and whether the pump will transfer, circulate or feed another item of equipment. The same plant may have circuits with different fluid, flow, pressure and duty requirements.
Source: IBGE — Municipal GDP and methodologySupply and service
- Reference distance
About 2,075 km in a straight line between the factory in Cabreúva, São Paulo, and the geographic center of the municipality (IBGE centroid). It is not a road route, freight cost or lead time.
How the distance is calculated
Haversine formula, treating the Earth as a sphere with a radius of 6,371 km, between the factory’s reference coordinates (Av. Adolpho João Traldi, 80 - Jacaré, Cabreúva-SP) and the municipal centroid published by IBGE in its Geographic Mesh API, retrieved on September 24, 2026. The centroid is a reference point of the municipal territory, not the municipal seat or the delivery location. The result is rounded to multiples of 5 km; below 20 km, only “less than 20 km” is shown.
IBGE Mesh API documentation
The schedule for Castelo do Piauí should distinguish equipment availability, preparation for dispatch and transport. The proposal confirms dates and responsibilities for each stage according to the requested configuration.
Before dispatch to Castelo do Piauí, confirm the approved configuration, contracted documentation and delivery details with the sales team.
Send your requirements
To review the FBE / FBEI families for the project in Castelo do Piauí, send the fluid and any known flow, pressure or head and temperature data. For replacement, add the installed pump’s identification and drawing. The team confirms the configuration and proposal scope.
Understand your application
Review process criteria and prepare the information for equipment selection.
Pumps for Asphalt, Bitumen and Pitch: Technical Guide to Heated Transfer
FBE and FBEI selection for transferring CAP, bitumen, pitch and asphalt emulsions: product data, speed by viscosity, heating (chamber or jacket), start-up, materials and assembly documentation.
View applicationPumps for Biodiesel and Renewable Fuels: Technical Guide to the Brazilian B100 Chain
Pump selection for B100 biodiesel production from vegetable oils and animal fats: reactor feed, methanol and catalyst, glycerin, washing, methanol recovery and storage — with material, sealing and motor criteria according to the project area classification.
View applicationFuel Transfer Pumps: Diesel, Gasoline, Ethanol, Heavy Fuel Oil and Aviation
FB Bombas technical guide to selecting liquid fuel transfer pumps — S10/S500 diesel, gasoline, ethanol, kerosene and jet fuel (JET-A1), heavy fuel oil and bunker — with the FBE (external gear) and FBCN (standardized centrifugal) series: viscosity, NPSH, overpressure protection, sealing and the installation standards (ABNT NBR IEC 60079, ABNT NBR 17505, NR-20 and NR-10), which are project requirements, not pump certifications.
View applicationPumps for Sugar-Ethanol Mills: Technical Selection Guide by Pumping Point
Juice, mud, syrup, molasses, massecuite, must, wine, vinasse and ethanol: the data to measure at each point, the documented materials of the FBCN, FBE, FBEI and FBOT series and the NPSH, sealing and hazardous-area limits that decide the selection.
View applicationFrom requirements to a technical proposal
Share what you already know. Additional details can be clarified with the team during review.
Fluid and process
What needs to be pumped, where it comes from and where it needs to go.
Operating conditions
Flow, pressure or head, temperature and operating schedule, when known.
Equipment and installation
Series, model, identification and space or connection constraints, if a pump is already installed.
Destination and supply
Project location, requested scope and documents required for your purchase.
Direct service from the factory
FB Bombas is a Brazilian manufacturer with a history dating back to 1944. Our factory in Cabreúva, São Paulo, brings together CNC machining, assembly and a hydraulic test bench. The team reviews your application and confirms the configuration, documents and supply conditions in the proposal.
About FB BombasReview the documentation
Use the family documentation and application guides to prepare your request.
Technical manuals
Installation, operation and maintenance by series, with the document language identified.
Application guides
Understand the process information needed to specify the equipment.
View applicationsMore on industrial pumps in Castelo do Piauí
See the other pages for this city and for other cities. Service is provided by the factory in Cabreúva, Brazil.
In the same region
Questions about our service
Information to help you prepare your inquiry to FB Bombas.
How is pump sizing performed?
The review for Castelo do Piauí considers the fluid, flow, required pressure or head, temperature, viscosity and installation conditions. Provide what you already know and identify any equipment in use. The team checks the necessary data before confirming series, model, drive and materials.
What is the advantage of buying from a national manufacturer like FB Bombas?
FB Bombas serves projects in Castelo do Piauí from its Cabreúva-SP factory, with direct engineering support and parts supply for its equipment. Availability, lead time, transport and on-site service are assessed according to the request. Its industrial pump manufacturing history began in 1944.
Does FB Bombas serve fire protection systems?
The portfolio includes pumping sets for fire protection systems. Provide the project, duty point, drive arrangement and required standards and acceptance criteria. Compliance must be checked for the supplied set; standards such as NFPA 20 and NBR 16704 are not certificates issued for the entire company.
Does FB Bombas offer FAT and SAT support for projects in Castelo do Piauí?
Yes, when they are included in the purchase scope. The published services include bench performance testing with a scope defined for the project, and on-site start-up and commissioning based on the manual and site conditions. Procedure, test points, acceptance criteria, customer witnessing and reports are defined in the proposal before the supply for Castelo do Piauí is contracted.
Is FB Bombas a national alternative to imported manufacturers in Castelo do Piauí?
FB Bombas is a Brazilian manufacturer with direct service from its factory in Cabreúva. To compare an alternative for the project in Castelo do Piauí, check performance, materials, dimensions, documentation and commercial conditions. Brazilian origin alone does not guarantee lower cost, shorter lead time or technical equivalence.
How do I contact FB Bombas’ technical team?
Use WhatsApp +55 11 97287-4837, telephone +55 11 4898-9200, comercial@fbbombas.com.br or the website form. To help the team, describe the application, project destination and any pump data already available.
What is the balancing grade of FB pumps for critical projects in Castelo do Piauí?
The published grade is for the FBME: service manual MSERV-08/01 (item 12.2) specifies static and dynamic impeller balancing to grade G6.3. The manuals of the other series do not publish a grade; for them and for critical projects in Castelo do Piauí, specify the required standard, grade and report in the purchase scope. Impeller balancing alone does not guarantee the vibration level of the installation.
How can pump delivery to Castelo do Piauí be planned?
The proposal should define availability, dispatch, transport, packaging and responsibilities for delivery to Castelo do Piauí. State access, unloading and receiving restrictions. Route, mode and timing are confirmed for the supply; a reference distance is not a road route or delivery time.
Does FB Bombas manufacture custom pumps?
Yes, in the five Custom Solutions categories: custom complete motor-pump assembly, mobile industrial kit, industrial pump skid, retrofit with a new FB pump in place of the installed one, and special materials projects. The scope of each project is defined with engineering before manufacture in Cabreúva, Brazil.
Do FBCN pumps follow ASME B73.1 dimensional compliance?
No: manual MTEC-03/00 states mechanical construction per ASME B73.1, not dimensional compliance with that standard. So, before a replacement in Castelo do Piauí, interchangeability with the existing pump is checked on each model’s drawing, together with the duty point, materials and drive.
Tell us about your project
Send your application to our factory team. You do not need every parameter defined to start the conversation.
Talk to usMon–Fri 8 a.m.–5 p.m.
What happens next
The team reviews the information and confirms the details needed for a proposal. Configuration, availability, documentation, transport and lead time depend on the requested scope.
Your industrial requirements
Describe the fluid, application and project destination. Include the model and technical data you already have.