Service to Santa Terezinha is coordinated from the Cabreúva-SP factory, route BR-101 (via AL) (2050 km), with a technical team for selection, commissioning and replacement support. Road access runs via BR-101 (via AL), with branches through BR-101, BR-232 and BR-116 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. For Santa Terezinha, FB Bombas offers retrofit of existing baseplates — the FBCN centrifugal follows ASME B73.1, whose dimension designation is common to the entire installed normalized fleet, whoever the original manufacturer was. Santa Terezinha, Pernambuco is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 82 years of continuous operation. For the local industry industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras qualification, API 676 compliance and ASME B73.1 normalization (API 610 engineered-to-order projects) — basis for retrofit in plants with global manufacturers already installed. FB Bombas pumps installed in Santa Terezinha, Pernambuco meet CRCC Petrobras qualification, ASME B73.1 (centrifugal) and API 676 (gear) compliance — credentials FB has sustained as a Brazilian manufacturer since 1944. The city sits within the IBGE mesoregion Sertão Pernambucano, a regional grouping of municipalities with similar economic and logistics profiles — useful for comparative analysis and technical-visit routing. In Santa Terezinha, óleos industriais and água industrial make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality).
Service to Santa Terezinha is coordinated from the Cabreúva-SP factory, route BR-101 (via AL) (2050 km), with a technical team for selection, commissioning and replacement support. Road access runs via BR-101 (via AL), with branches through BR-101, BR-232 and BR-116 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. For Santa Terezinha, FB Bombas offers retrofit of existing baseplates — the FBCN centrifugal follows ASME B73.1, whose dimension designation is common to the entire installed normalized fleet, whoever the original manufacturer was. Santa Terezinha, Pernambuco is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 82 years of continuous operation. For the local industry industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras qualification, API 676 compliance and ASME B73.1 normalization (API 610 engineered-to-order projects) — basis for retrofit in plants with global manufacturers already installed. FB Bombas pumps installed in Santa Terezinha, Pernambuco meet CRCC Petrobras qualification, ASME B73.1 (centrifugal) and API 676 (gear) compliance — credentials FB has sustained as a Brazilian manufacturer since 1944. The city sits within the IBGE mesoregion Sertão Pernambucano, a regional grouping of municipalities with similar economic and logistics profiles — useful for comparative analysis and technical-visit routing. In Santa Terezinha, óleos industriais and água industrial make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality).
Years
Compliant
Tested
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBEI gear pumps (FB Bombas) in Santa Terezinha, Pernambuco: sized for local industry, viscous fluids up to 350°C, API 676 compliance and in-house manufacturing in Cabreúva-SP at 2050 km. Typical critical-parts lead time: 96h to 7 days.
Service to Santa Terezinha is coordinated from the Cabreúva-SP factory, route BR-101 (via AL) (2050 km), with a technical team for selection, commissioning and replacement support. Road access runs via BR-101 (via AL), with branches through BR-101, BR-232 and BR-116 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. For Santa Terezinha, FB Bombas offers retrofit of existing baseplates — the FBCN centrifugal follows ASME B73.1, whose dimension designation is common to the entire installed normalized fleet, whoever the original manufacturer was. Santa Terezinha, Pernambuco is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 82 years of continuous operation. For the local industry industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras qualification, API 676 compliance and ASME B73.1 normalization (API 610 engineered-to-order projects) — basis for retrofit in plants with global manufacturers already installed. FB Bombas pumps installed in Santa Terezinha, Pernambuco meet CRCC Petrobras qualification, ASME B73.1 (centrifugal) and API 676 (gear) compliance — credentials FB has sustained as a Brazilian manufacturer since 1944. The city sits within the IBGE mesoregion Sertão Pernambucano, a regional grouping of municipalities with similar economic and logistics profiles — useful for comparative analysis and technical-visit routing. In Santa Terezinha, óleos industriais and água industrial make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality).
Santa Terezinha receives equipment after hydraulic testing and ISO 21940 G2.5 balancing — traceable report attached to the Data Book. In Santa Terezinha, FBEI and FBCN cover the technical range observed in the field — from primary transfer and circulation to replacing an installed pump carrying the same ASME B73.1 dimensional designation. For óleos industriais and água industrial, the materials recommendation in Santa Terezinha converges on austenitic stainless steels (AISI 304/316) with attention to thermal expansion, a starting point adjustable based on field-observed corrosion. Gear pump selection for Santa Terezinha starts with viscosity at the real pumping temperature — not the 40 °C catalog figure — the typical case of óleos e água industrial. With that data, engineering defines speed (flow is proportional), bushing materials and the thermal arrangement: jacketed body for cold starts and a seal compatible with the hot fluid.
Technically, Santa Terezinha shows low complexity in its fluid mix — lean fluid roster — technical operation focused on few main vectors. Demand in Santa Terezinha is characterized by medium density — regular and predictable opportunity pipeline, a typical regional pattern of the mesoregion. A GDP of R$ 123 million (IBGE, 2023) with a services profile (28.3% of value added in 2021) places Santa Terezinha's local demand in the utilities field: building pressurization, light process water and fire-fighting systems. Working with óleos industriais and água industrial in Santa Terezinha demands attention to viscosity at operating temperature, residual abrasiveness and chemical compatibility — criteria FB engineering applies on every project. Due to proximity to the portuario cluster, Santa Terezinha shares a technical agenda with bunker (BPF fuel oil), marine cooling water and liquid-bulk discharge — a direct path to series and materials selection. In Santa Terezinha, series FBEI for transferência geral and series FBCN for utilidades — a combination that covers the typical local industrial demand.
For Santa Terezinha, 72h to 7 days, depending on modal and dry season is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. Cabreúva-SP → Santa Terezinha via BR-101 (via AL) (2050 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. For Santa Terezinha, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
For projects with FBE pumps in Santa Terezinha, talk to FB application engineering: viscosity analysis, available NPSH, seal materials and operating regime — technical response within 24-48 business hours.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
What changes when the pump comes straight from the manufacturer: engineering, stock and logistics under one roof in Cabreúva-SP.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original spare parts for the FBE, FBEI, FBCN and FBOT series stocked at our own factory, ready to ship.
Own factory in Cabreúva/SP with full production capability, serving Santa Terezinha and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Santa Terezinha and the entire Pernambuco region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteFour catalog series, fire-fighting systems and engineered-to-order — in-house manufacturing and hydrostatic testing on 100% of pumps
Our technical team is ready to develop the ideal solution for your application
Contact Us
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for Santa Terezinha
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from Santa Terezinha — same series, same factory in Cabreúva/SP.
Yes. FB Bombas is a Brazilian manufacturer accredited in FINAME (BNDES Special Industrial Financing Agency), which qualifies equipment supplied to Santa Terezinha for BNDES Finame financing lines (Industrial Working Capital, Modernization, Capital Goods) with preferential conditions for national industry. The commercial team provides the product FINAME code on the technical proposal for inclusion in the customer financial plan.
FB Bombas' rotating set balancing follows ISO 21940 G2.5 — a grade equivalent to the API 610 requirement for heavy-duty service. It is the level demanded in critical Santa Terezinha projects: continuous regime, plants with online vibration monitoring or operations where unplanned downtime is expensive. Above 3,600 RPM or with rotating mass beyond 50 kg, balancing is done on two planes, with a piezoelectric sensor.
Yes. Since FB Bombas manufactures entirely in Cabreúva/SP, replacement parts for the FBE, FBEI, FBCN and FBOT series are available directly from the factory, with short lead times for scheduled stops and priority service for emergencies. This significantly reduces total cost of ownership.
Contact can be made via WhatsApp at +55 11 97287-4837, email comercial@fbbombas.com.br or through the form on our website. Technical response is prioritized on the same business day, with direct reply from the application engineering team.
The schedule is set by three factors: chosen series, construction materials and stock at order time. Standard configurations ship faster; custom ones receive a firm date in the technical proposal. Delivery to Santa Terezinha is by road, shipping directly from the factory.
Each series has its thermal limit: with heating jacket and special sealing, FBE and FBEI reach 350°C; FBOT hits the same 350°C in thermal oil circuits; FBCN goes up to 260°C when fitted with proper materials and sealing. Safe operation requires correctly sized sealing and materials.
FB Bombas' trajectory as an industrial pump manufacturer began in 1944 and adds up to over 82 years of continuous experience. Engineering, manufacturing and testing operate under one roof at the Cabreúva/SP factory — a guarantee of total quality control on every unit that reaches Santa Terezinha and the rest of Brazil.
It offers both. The FAT (Factory Acceptance Test) takes place on the Cabreúva/SP bench and covers hydraulic testing, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration; when the customer specifies, inspection witnesses the tests. In the SAT (Site Acceptance Test) of Santa Terezinha projects, application engineering supports commissioning with startup checklist, laser alignment and capture of the baseline vibration signature.
Yes — Santa Terezinha is part of FB Bombas’ direct service area. Supply, engineering support and spare parts ship from the factory in Cabreúva/SP; sizing is done at no cost and, when the project is critical, the team evaluates an on-site technical visit.
It is compatible when the dimension designation is the same. ASME B73.1 (North American dimensional standard for end-suction process pumps), adopted in the FBCN series, defines an envelope common to the whole normalized fleet operating in Santa Terezinha plants, whoever manufactured the installed unit. In a typical retrofit, baseplate, suction/discharge piping and foundations are preserved, and FB Bombas supplies the complete new pump — not loose parts for third-party equipment. The dimensional and hydraulic gap analysis is executed by application engineering before supplying.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
