The óleos industriais and água industrial profile observed in São João Evangelista maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. CRCC Petrobras certification valid in MG qualifies FB Bombas for direct supply to São João Evangelista in refining and petrochemical operations, with FBE and FBCN series compliant with API 610 / API 676 and materials specified per NACE MR0175 for sour service with H2S. Through 104-km proximity to the steel cluster of Ipatinga, São João Evangelista inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. The BR-381 Rodovia Fernão Dias corridor combined with highways BR-381, BR-040, BR-262 and BR-116 composes the freight mesh to São João Evangelista — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. In São João Evangelista, Minas Gerais, FB Bombas serves local industry projects with the FBE, FBCN, FBOT and FBEI series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). In São João Evangelista, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. Service to São João Evangelista is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (697 km), with a technical team for selection, commissioning and replacement support.
The óleos industriais and água industrial profile observed in São João Evangelista maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. CRCC Petrobras certification valid in MG qualifies FB Bombas for direct supply to São João Evangelista in refining and petrochemical operations, with FBE and FBCN series compliant with API 610 / API 676 and materials specified per NACE MR0175 for sour service with H2S. Through 104-km proximity to the steel cluster of Ipatinga, São João Evangelista inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. The BR-381 Rodovia Fernão Dias corridor combined with highways BR-381, BR-040, BR-262 and BR-116 composes the freight mesh to São João Evangelista — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. In São João Evangelista, Minas Gerais, FB Bombas serves local industry projects with the FBE, FBCN, FBOT and FBEI series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). In São João Evangelista, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. Service to São João Evangelista is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (697 km), with a technical team for selection, commissioning and replacement support.
Years
Certified
Warranty
Direct answer for industrial projects — recommended series, standards compliance and logistics.
The FBEI gear-pump line is specified in São João Evangelista, Minas Gerais for local industry — flow and pressure set by the actual system curve. Cabreúva-SP factory (697 km), API 676 and direct technical service from FB engineering.
The óleos industriais and água industrial profile observed in São João Evangelista maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. CRCC Petrobras certification valid in MG qualifies FB Bombas for direct supply to São João Evangelista in refining and petrochemical operations, with FBE and FBCN series compliant with API 610 / API 676 and materials specified per NACE MR0175 for sour service with H2S. Through 104-km proximity to the steel cluster of Ipatinga, São João Evangelista inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. The BR-381 Rodovia Fernão Dias corridor combined with highways BR-381, BR-040, BR-262 and BR-116 composes the freight mesh to São João Evangelista — a cost variable in pricing skids, pump-motor sets and indivisible cargo with escort. In São João Evangelista, Minas Gerais, FB Bombas serves local industry projects with the FBE, FBCN, FBOT and FBEI series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). In São João Evangelista, FB Bombas serves projects with in-house application engineering: system-curve analysis, NPSH balance (available vs required), series selection (FBE / FBCN / FBOT / FBEI / FBFS) and API 682 sealing plan. Service to São João Evangelista is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (697 km), with a technical team for selection, commissioning and replacement support.
For óleos industriais and água industrial, the materials recommendation in São João Evangelista converges on austenitic stainless steels (AISI 304/316) with attention to thermal expansion, a starting point adjustable based on field-observed corrosion. For the technical profile observed in São João Evangelista, FB Bombas application engineering recommends FBEI and FBCN as a starting point for sizing, subject to refinement per Q×H curve, available NPSH and actual fluid temperature. In São João Evangelista, transferência geral and utilidades are the applications that most often appear in local industrial operations; each defines a distinct set of process variables. 100% of pumps bound for São João Evangelista pass through the Cabreúva-SP hydraulic bench — acceptance testing with multi-point curve readings and G2.5 dynamic balancing.
São João Evangelista: low fluid complexity, lean fluid roster — technical operation focused on few main vectors. São João Evangelista: medium density — regular and predictable opportunity pipeline — a variable influencing commercial strategy and service logistics. São João Evangelista: by affinity to the siderurgico cluster, continuous operation with annual scheduled maintenance and occasional outages tied to production campaigns — a variable that enters commercial planning. Working with óleos industriais and água industrial in São João Evangelista demands attention to viscosity at operating temperature, residual abrasiveness and chemical compatibility — criteria FB engineering applies on every project. Due to proximity to the siderurgico cluster, São João Evangelista shares a technical agenda with blast-furnace cooling systems, rolling-mill lubricating oils and thermal oil in continuous furnaces — a direct path to series and materials selection. In São João Evangelista, series FBEI for transferência geral and series FBCN for utilidades — a combination that covers the typical local industrial demand.
For São João Evangelista, 24-48h via federal highways is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. Cabreúva-SP → São João Evangelista via BR-381 Rodovia Fernão Dias (697 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. For São João Evangelista, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
Technical inquiry for the FBE series in São João Evangelista: real-curve sizing, material recommendation and sealing configuration. Direct service from the FB team.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Own factory in Cabreúva/SP with full production capability, serving São João Evangelista and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves São João Evangelista and the entire Minas Gerais region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteSoluções completas em bombeamento industrial com tecnologia de ponta
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for São João Evangelista
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from São João Evangelista — same series, same factory in Cabreúva/SP.
Yes. FB Bombas manufactures pumps for stationary fire protection systems in compliance with NFPA (National Fire Protection Association) and ABNT NBR 16704 standards, serving building and industrial projects that require these certifications.
Yes. FB Bombas is a Brazilian industrial-pump manufacturer since 1944, with a factory in Cabreúva/SP and a technical team for projects in São João Evangelista. The FBCN (centrifugal), FBE/FBEI (gear) and FBOT (thermal oil) series cover applications typically served by global manufacturers such as KSB, Sulzer, Imbil and Grundfos — with advantages in lead time (no import), direct support without intermediaries, fast spare-parts availability and Portuguese-speaking application engineering. For retrofits, ASME B73.1 normalization ensures dimensional interchangeability with existing baseplates.
Shorter delivery times (no import dependency), direct technical support from FB engineering, replacement parts with in-house manufacturing, prices in local currency (no exchange rate exposure) and on-site service for projects in São João Evangelista and surrounding areas. FB Bombas has been manufacturing in Brazil since 1944.
Yes. FB Bombas offers technical training for operations and maintenance teams in São João Evangelista, with modules on: sizing and reading the characteristic curve, identifying cavitation through NPSH, mechanical-seal troubleshooting, laser alignment, ISO 10816 vibration analysis and PM (preventive maintenance) practice with bearing and wear-ring replacement. Training can be delivered at the customer plant or at the Cabreúva/SP factory, in person or hybrid.
FB Bombas manufactures three major lines: FBE (external gear) for viscous fluids, FBEI (internal gear) for lubricating fluids, FBCN (normalized centrifugal) for water and low-viscosity fluids, and FBOT (specific centrifugal) for thermal oil circuits. We also serve fire protection systems in compliance with NFPA and NBR 16704.
Yes. Correct sizing is the main lever for energy efficiency — an oversized or undersized pump wastes energy. FB Bombas engineering calculates the optimal operating point considering the actual process conditions in São João Evangelista, optimizing the flow/pressure/power ratio.
Service to São João Evangelista is handled directly by the FB Bombas team at the Cabreúva/SP factory — no intermediaries, no resellers. That means direct contact with application engineering for sizing, technical quotes returned within 24h and original spare parts supplied without distributor markup. On-site technical visits to São João Evangelista are planned based on project criticality.
Yes. Since FB Bombas manufactures entirely in Cabreúva/SP, replacement parts for the FBE, FBEI, FBCN and FBOT series are available directly from the factory, with short lead times for scheduled stops and priority service for emergencies. This significantly reduces total cost of ownership.
Yes. FB Bombas serves São João Evangelista and the entire surrounding region with supply, technical support and replacement parts directly from the factory in Cabreúva/SP. Support includes sizing at no cost and, for critical projects, on-site technical visits.
To receive a technical quote for industrial pumps in São João Evangelista, send via website form, WhatsApp +55 11 97287-4837 or email comercial@fbbombas.com.br the application data: fluid (name + viscosity at operating temperature), target flow (m³/h), discharge head (m), available NPSH, operating temperature and regime (continuous or intermittent). Application engineering responds with a preliminary technical proposal, characteristic curve, suggested materials and delivery lead time.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
