Technical summary
In Betim, Minas Gerais, FBEI (external gear) serves Refinaria Gabriel Passos (REGAP) with 12 sizes (1/8" to 6"), pressure up to 22 kgf/cm² and field-validated materials. Cabreúva-SP at 481 km, 48-72h logistics lead time.
FBE Gear Pumps
FBE Gear Pumps in Betim
In Betim, óleos hidráulicos, fluidos de corte and água de resfriamento make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality). Road access runs via BR-381 Rodovia Fernão Dias, with branches through BR-381, BR-040, BR-262 and BR-116 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. Through 15-km proximity to the automotive cluster of Contagem, Betim inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. For pumping projects in Betim, FB Bombas provides dedicated application engineering — pre-sizing against the actual system curve, material selection (AISI 316) and on-site commissioning support. Betim has automobilística and refinaria as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant. FB Bombas is a Brazilian manufacturer of industrial pumps serving Betim, Minas Gerais, with the FBOT series applied to the automobilística sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and certification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. Industrial plants in Betim rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. Membership in the Metropolitana de Belo Horizonte mesoregion (IBGE) places Betim in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. For the Betim, Minas Gerais market, FB Bombas offers industrial pumps with certified hydraulic tests, API 610 (heavy-duty centrifugal), ASME B73.1 (dimensional interchangeability) and a traceable Data Book per unit — a technical package that shortens the customer homologation cycle. For Betim, where automobilística is the dominant calling, FB Bombas recommends the FBOT series: FBOT pumps for heating systems in painting processes, heat treatment and automotive assembly lines. Technical window: Stable temperature, Long service life, Low maintenance. Service to Betim is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (481 km), with a technical team for selection, commissioning and replacement support.
Nationwide Service
470km from factory
FBE Gear Pumps|Desde 1944
In Betim, óleos hidráulicos, fluidos de corte and água de resfriamento make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality). Road access runs via BR-381 Rodovia Fernão Dias, with branches through BR-381, BR-040, BR-262 and BR-116 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. Through 15-km proximity to the automotive cluster of Contagem, Betim inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. For pumping projects in Betim, FB Bombas provides dedicated application engineering — pre-sizing against the actual system curve, material selection (AISI 316) and on-site commissioning support. Betim has automobilística and refinaria as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant. FB Bombas is a Brazilian manufacturer of industrial pumps serving Betim, Minas Gerais, with the FBOT series applied to the automobilística sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and certification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. Industrial plants in Betim rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. Membership in the Metropolitana de Belo Horizonte mesoregion (IBGE) places Betim in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. For the Betim, Minas Gerais market, FB Bombas offers industrial pumps with certified hydraulic tests, API 610 (heavy-duty centrifugal), ASME B73.1 (dimensional interchangeability) and a traceable Data Book per unit — a technical package that shortens the customer homologation cycle. For Betim, where automobilística is the dominant calling, FB Bombas recommends the FBOT series: FBOT pumps for heating systems in painting processes, heat treatment and automotive assembly lines. Technical window: Stable temperature, Long service life, Low maintenance. Service to Betim is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (481 km), with a technical team for selection, commissioning and replacement support.
Coverage
Nationwide Service
Distance
470km from factory
80+
Years
API
Certified
100%
Warranty
80+
Years in Market
CRCC
Petrobras Approved
27
States Served
API 610/676
Certified Pumps
Technical summary
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBE Gear Pumps for Refinaria Gabriel Passos (REGAP) in Betim
Local context
In Betim, óleos hidráulicos, fluidos de corte and água de resfriamento make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality). Road access runs via BR-381 Rodovia Fernão Dias, with branches through BR-381, BR-040, BR-262 and BR-116 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. Through 15-km proximity to the automotive cluster of Contagem, Betim inherits technical-qualification standards (CRCC, sector audits and customer-side homologation standards) and approved suppliers — a favorable context for normalized FB solutions. For pumping projects in Betim, FB Bombas provides dedicated application engineering — pre-sizing against the actual system curve, material selection (AISI 316) and on-site commissioning support. Betim has automobilística and refinaria as its main industrial front — which directly shapes the pump type (gear, centrifugal, thermal-oil) with technical fit for each plant. FB Bombas is a Brazilian manufacturer of industrial pumps serving Betim, Minas Gerais, with the FBOT series applied to the automobilística sector that dominates the region. Direct factory service from Cabreúva-SP, with application engineering for technical sizing and certification under CRCC Petrobras / API 610 / ASME B73.1 per project specification. Industrial plants in Betim rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. Membership in the Metropolitana de Belo Horizonte mesoregion (IBGE) places Betim in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. For the Betim, Minas Gerais market, FB Bombas offers industrial pumps with certified hydraulic tests, API 610 (heavy-duty centrifugal), ASME B73.1 (dimensional interchangeability) and a traceable Data Book per unit — a technical package that shortens the customer homologation cycle. For Betim, where automobilística is the dominant calling, FB Bombas recommends the FBOT series: FBOT pumps for heating systems in painting processes, heat treatment and automotive assembly lines. Technical window: Stable temperature, Long service life, Low maintenance. Service to Betim is coordinated from the Cabreúva-SP factory, route BR-381 Rodovia Fernão Dias (481 km), with a technical team for selection, commissioning and replacement support.
Technical solutions
Technical-and-commercial support for Betim is covered from Cabreúva-SP, with typical lead time for critical parts of 48-72h via dedicated carrier. Material selection for óleos hidráulicos, fluidos de corte and água de resfriamento in Betim considers austenitic stainless steels (AISI 304/316) with attention to thermal expansion — a specification FB Bombas details on a matweb sheet after fluid chemical analysis. The automotivo cluster near Betim brings a technical agenda of cutting fluids, hydraulic oils, paint-line water and process cooling — a reference FB Bombas uses as a benchmark for initial sizing and series selection. For the technical profile observed in Betim, FB Bombas application engineering recommends FBEI and FBCN as a starting point for sizing, subject to refinement per Q×H curve, available NPSH and actual fluid temperature. In Betim, the sealing strategy starts at single cartridge mechanical seal (Plan 11/13) for general service, upgradable to dual when the fluid requires secondary containment — combined with API 682 plan selection (Plan 11/13/52/53/62) and specific commissioning care. In Betim, prensas hidráulicas, usinagem, cabines de pintura and teste are the applications that most often appear in local industrial operations; each defines a distinct set of process variables. For Betim, FB delivery includes conformance certificates against ASME B73.1 for horizontal normalized centrifugal pumps — consolidated market standard — documentation typically required during commissioning audits and qualification processes. Betim receives equipment after hydraulic testing and ISO 21940 G2.5 balancing — traceable report attached to the Data Book.
Why FB Bombas
The medium fluid-complexity profile in Betim (moderate fluid roster — concentration in a few main technical categories) shapes FB's technical strategy: standardization versus case-by-case customization. Betim is natural territory for scheduled replacement programs — the FBCN delivers the same dimensional envelope as the international standard, with motorization, materials and sealing tuned to the local process. automotivo cluster near Betim imposes a collective shutdowns (recess, industrial holidays) synchronize maintenance across regional plants pace — syncing equipment purchases, PM contracting and regional technical-team mobilization. Betim shows a very high industrial concentration — territory for multi-customer technical-visit campaigns pattern, a structural factor that modulates predictability of recurring revenue and the viable contract type (spot, annual, multi-year). balanced logistics — freight is a contained fraction of equipment cost is the logistics-economic scenario of Betim, reflected in pricing, typical payment terms and warranty sizing. By the ranks among the 10 largest cities in the state at relevant industrial scale profile, Betim ranks as a relevant market in FB's commercial plan with regular technical coverage. In Betim, óleos hidráulicos, fluidos de corte and água de resfriamento form the typical fluid set — guiding both series selection (gear, centrifugal, thermal oil) and constructive detail (closed/open/semi-open impeller). Betim sits alongside relevant industrial neighbors — a base that justifies regional rotating-asset management programs and PMs synchronized across multiple customers. In Betim, automobilística accounts for a large share of the pumping load — combining utility lines (water, steam, compressed air) with dedicated process circuits. Betim shows cases like series FBEI for prensas hidráulicas and usinagem and series FBCN for cabines de pintura and teste — a package FB Bombas addresses with real-curve sizing, material recommendation and dimensioned seal configuration. In Betim, near a automotivo cluster, applications such as cutting fluids in machining, hydraulic oils in presses and treated water in paint booths make up the operational agenda — each backed by technical references in the FBE/FBCN/FBOT catalogues. Betim, among the 10 most populous cities in MG, is a regional benchmark of economic activity, sustains a predictable B2B demand chain — an ideal profile for scheduled supply and multi-year replacement contracts. In Betim, engineered-to-order projects benefit from the FB combination: normalized baseline hydraulics + tailored customization (instrumentation, automation, special materials) with scope-defined lead time.
Logistics & support
Logistics lead time to Betim is 24-48h via federal highways — variable with cargo type, season and specific optimizations. The technical-service model in Betim is structured as planned technical visits with 1-2 day mobilization window — direct coordination with the customer. Alternative routing to Betim can use BR-381, BR-040, BR-262 and BR-116, which helps in heavy-traffic situations or maintenance on specific roads. 481 km separate the Cabreúva-SP factory from Betim via BR-381 Rodovia Fernão Dias — an axis sized for movement of pumps, skids and pump-and-motor sets. Equipment with above-conventional gauge bound for Betim is moved by road modal with dedicated route planning. Consignment stock of critical items is a common approach in Betim, especially for sets running 24/7 or with concentrated PM windows. The factory-to-Betim logistics cycle begins with documented dispatch: invoice, packing list, test certificates and the equipment's technical manual.
Request your proposal
For projects with FBE pumps in Betim, talk to FB application engineering: viscosity analysis, available NPSH, seal materials and operating regime — technical response within 24-48 business hours.
Talk to engineeringWhy FB Bombas
National leadership in industrial pumping
For over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Brazil Differentiators
Advantages for your Industrial Operation
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Complete National Coverage
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Brazil-Wide Logistics
Nationwide deliveries through partner carrier network with optimized lead times.
Dedicated Engineering
Technical team available for sizing, project work and after-sales support across any region.
Strategic Stock
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Discover FB Bombas
Own factory in Cabreúva/SP with full production capability, serving Betim and all of Brazil
Own Manufacturing
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
Custom Projects
We size and build complete systems, ready for installation at your industrial plant.
Replacement Parts
We keep original parts in stock for all series, ensuring continuity of your operation.
Industrial Production
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Betim and the entire Minas Gerais region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteOur Product Line
Soluções completas em bombeamento industrial com tecnologia de ponta
Need a Custom Solution?
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Industrial Capacity
Production line dedicated to industrial pumps
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
350°C
Max. Temp. FBOT
1,350 l/min
Max. Flow FBE
2,200 m³/h
Max. Flow FBCN
Companies that Trust FB Bombas
Present in the largest industrial projects in Brazil and Latin America
Explore by pump type
See specific solutions for Betim
Industrial Applications Served
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Pumps for Asphalt, Bitumen and Pitch: Technical Guide to Heated Transfer
Read technical guide
Pumps for Biodiesel and Renewable Fuels: Technical Guide to the Brazilian B100 Chain
Read technical guide
Fuel Transfer Pumps: Diesel, Gasoline, Ethanol, Heavy Fuel Oil and Aviation
Read technical guide
Pumps for Sugar-Ethanol Mills: Complete Technical Selection Guide
Read technical guide
Gear Pumps in Nearby Cities
Regional service from Betim — same series, same factory in Cabreúva/SP.
Frequently Asked Questions about Betim
Yes. Active CRCC at Petrobras and compliance with API 676 (FBE series) and API 610 (FBCN series) qualify FB Bombas to supply refineries and petrochemical plants, including applications in classified areas and hazardous fluids. Factory engineering sizes sealing arrangements and materials according to each specification.
Shorter delivery times (no import dependency), direct technical support from FB engineering, replacement parts with in-house manufacturing, prices in local currency (no exchange rate exposure) and on-site service for projects in Betim and surrounding areas. FB Bombas has been manufacturing in Brazil since 1944.
Yes. FB Bombas serves the entire metropolitan region and microregions neighboring Betim with the same technical support and logistics structure. This regional reach allows serving industrial plants distributed across multiple cities in a coordinated way.
Sizing is performed by FB Bombas’ application engineering team based on four key variables: desired flow, differential pressure, working temperature and fluid viscosity. Additional data such as available NPSH, operating cycle and fluid chemical compatibility are also considered. The service is free of charge for customers in Betim.
Service to Betim is handled directly by the FB Bombas team at the Cabreúva/SP factory — no intermediaries, no resellers. That means direct contact with application engineering for sizing, technical quotes returned within 24h and original spare parts supplied without distributor markup. On-site technical visits to Betim are planned based on project criticality.
Maximum temperature depends on the series: FBE and FBEI operate up to 350°C with heating jacket and special sealing; FBOT operates up to 350°C in thermal oil circuits; FBCN operates up to 250°C with proper materials and sealing. Correct sizing of sealing and materials is essential for safe operation.
Yes. FB Bombas offers retrofit of existing installations, including seal upgrades, replacement of worn components, adaptation for new fluids and hydraulic performance improvement. The assessment is based on a technical report of the current installation.
Mechanical seal configuration is defined by engineering according to the fluid, temperature and operating pressure. Options include single seals, double seals (tandem or back-to-back), cartridge seals and packing glands for specific applications. For hazardous fluids, double seals with barrier are recommended.
Yes. Correct sizing is the main lever for energy efficiency — an oversized or undersized pump wastes energy. FB Bombas engineering calculates the optimal operating point considering the actual process conditions in Betim, optimizing the flow/pressure/power ratio.
To receive a technical quote for industrial pumps in Betim, send via website form, WhatsApp +55 11 97287-4837 or email comercial@fbbombas.com.br the application data: fluid (name + viscosity at operating temperature), target flow (m³/h), discharge head (m), available NPSH, operating temperature and regime (continuous or intermittent). Application engineering responds with a preliminary technical proposal, characteristic curve, suggested materials and delivery lead time.
Regional Presence
Industrial Hub
Betim Industrial Hub
Betim is recognized as an important industrial hub in the region, with emphasis on automobilística and refinaria. FB Bombas offers specialized service for local industries.
AutomobilísticaRefinaria
Need gear or centrifugal pumps in Betim?
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
Talk to us
WhatsApp
+55 11 97287-4837
Reply during business hours
Phone
+55 11 4898-9200
Mon–Fri · 8 a.m.–5 p.m.
E-mail
comercial@fbbombas.com.br
Sales
Factory
Cabreúva — SP
Av. Adolpho João Traldi, 80
