Service to Mundo Novo is coordinated from the Cabreúva-SP factory, route BR-262 (via Bauru-SP) (730 km), with a technical team for selection, commissioning and replacement support. Road access runs via BR-262 (via Bauru-SP), with branches through BR-262, BR-163 and BR-267 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. Industrial plants in Mundo Novo rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. CRCC Petrobras certification valid in MS qualifies FB Bombas for direct supply to Mundo Novo in refining and petrochemical operations, with FBE and FBCN series compliant with API 610 / API 676 and materials specified per NACE MR0175 for sour service with H2S. In Mundo Novo, Sucroalcooleiro and Alimentos concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Mundo Novo, Mato Grosso do Sul with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 610 / API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers) and a traceable Data Book on every unit shipped. The FB Bombas FBE series answers sucroalcooleiro demand in Mundo Novo — FBE external gear pumps for transfer of molasses, ethanol, lubricating oils and viscous fluids in sugarcane mills. Operating range: Ideal for molasses and honey, Operation with crystallized products, Easy cleaning. FB Bombas technical service in Mundo Novo covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. Mundo Novo sits 198 km from the sugar-and-ethanol cluster centered in Dourados, a proximity that usually means shared suppliers and aligned maintenance standards. In Mundo Novo, melaço, óleos lubrificantes, óleos comestíveis and caldo de cana make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality).
Service to Mundo Novo is coordinated from the Cabreúva-SP factory, route BR-262 (via Bauru-SP) (730 km), with a technical team for selection, commissioning and replacement support. Road access runs via BR-262 (via Bauru-SP), with branches through BR-262, BR-163 and BR-267 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. Industrial plants in Mundo Novo rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. CRCC Petrobras certification valid in MS qualifies FB Bombas for direct supply to Mundo Novo in refining and petrochemical operations, with FBE and FBCN series compliant with API 610 / API 676 and materials specified per NACE MR0175 for sour service with H2S. In Mundo Novo, Sucroalcooleiro and Alimentos concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Mundo Novo, Mato Grosso do Sul with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 610 / API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers) and a traceable Data Book on every unit shipped. The FB Bombas FBE series answers sucroalcooleiro demand in Mundo Novo — FBE external gear pumps for transfer of molasses, ethanol, lubricating oils and viscous fluids in sugarcane mills. Operating range: Ideal for molasses and honey, Operation with crystallized products, Easy cleaning. FB Bombas technical service in Mundo Novo covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. Mundo Novo sits 198 km from the sugar-and-ethanol cluster centered in Dourados, a proximity that usually means shared suppliers and aligned maintenance standards. In Mundo Novo, melaço, óleos lubrificantes, óleos comestíveis and caldo de cana make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality).
Years
Certified
Warranty
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBE+FBEI gear pumps (FB Bombas) in Mundo Novo, Mato Grosso do Sul: sized for sucroalcooleiro, viscous fluids up to 350°C, API 676 compliance and in-house manufacturing in Cabreúva-SP at 730 km. Typical critical-parts lead time: 72-96h.
Service to Mundo Novo is coordinated from the Cabreúva-SP factory, route BR-262 (via Bauru-SP) (730 km), with a technical team for selection, commissioning and replacement support. Road access runs via BR-262 (via Bauru-SP), with branches through BR-262, BR-163 and BR-267 — a corridor that sets delivery times for rotating equipment and the logistics of technical service. Industrial plants in Mundo Novo rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. CRCC Petrobras certification valid in MS qualifies FB Bombas for direct supply to Mundo Novo in refining and petrochemical operations, with FBE and FBCN series compliant with API 610 / API 676 and materials specified per NACE MR0175 for sour service with H2S. In Mundo Novo, Sucroalcooleiro and Alimentos concentrate the largest share of demand for rotating equipment — a technical agenda well known to the FB application team, with proposals sized against the actual system curve. Brazilian industrial-pump manufacturer since 1944, FB Bombas supplies Mundo Novo, Mato Grosso do Sul with the FBE, FBCN, FBOT, FBEI series and FBFS fire-fighting systems — designed and produced in Cabreúva-SP with API 610 / API 676 compliance, ASME B73.1 normalization (interchangeable with global manufacturers) and a traceable Data Book on every unit shipped. The FB Bombas FBE series answers sucroalcooleiro demand in Mundo Novo — FBE external gear pumps for transfer of molasses, ethanol, lubricating oils and viscous fluids in sugarcane mills. Operating range: Ideal for molasses and honey, Operation with crystallized products, Easy cleaning. FB Bombas technical service in Mundo Novo covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. Mundo Novo sits 198 km from the sugar-and-ethanol cluster centered in Dourados, a proximity that usually means shared suppliers and aligned maintenance standards. In Mundo Novo, melaço, óleos lubrificantes, óleos comestíveis and caldo de cana make up the fluid portfolio served by local plants — each with its own requirements on available NPSH, in-service viscosity and sealing strategy (Plan 11/13/52/53 by criticality).
For Mundo Novo, the FB protocol includes hydrostatic test at 1.5× design pressure, performance run and ISO 21940 G2.5 balancing — all documented in the Data Book. In Mundo Novo, influence from the sucroalcooleiro cluster translates into sugarcane juice, vinasse, molasses and thermal oil for evaporators — 24/7 operation during harvest — variables that enter both preliminary sizing and the selection of materials and constructive configurations. In Mundo Novo, materials such as cast iron with proper coating or stainless steels when the fluid requires answer the requirements of melaço, óleos lubrificantes and óleos comestíveis — a combination that drives service life of casing, impeller, shaft and shaft sleeve, refined via corrosion analysis using removal rates (mpy). Typical applications mapped for Mundo Novo include transferência de melaço, dosagem de aditivos, transferência de óleos and circulação de caldo — each with its own requirements for NPSH, acceptable pulsation and start-up strategy. Mundo Novo is served with a logistics lead time of 72-96h for critical parts from Cabreúva-SP, subject to case-by-case optimization. Mundo Novo typically calls for FBE+FBEI and FBCN+FBOT — an initial recommendation based on local productFit, dominant industrial cluster and identified fluid profile; final technical approval is refined by application engineering. FBCN centrifugal pumps with flow up to 2,200 m³/h, head up to 138 m and temperature up to 260°C (thermal oil via FBOT up to 350°C) is the operating window initially considered for Mundo Novo — the final curve is finalized after piping-network analysis (head loss, geometric head, required vs. available NPSH).
Mundo Novo: high fluid complexity, diversified fluid roster — requires a broad catalogue of materials and sealing configurations. Mundo Novo: logistics carries relative weight in the final composition — planned projects usually consolidate volumes — a relevant input for pricing and commercial strategy. Mundo Novo: by affinity to the sucroalcooleiro cluster, concentrated harvest season (Apr-Nov) creates short maintenance windows and intense parts demand during milling — a variable that enters commercial planning. At state scale, Mundo Novo belongs to the set of cities with relevant industrial scale in the state. Mundo Novo: medium density — regular and predictable opportunity pipeline — a variable influencing commercial strategy and service logistics. Working with melaço, óleos lubrificantes and óleos comestíveis in Mundo Novo demands attention to viscosity at operating temperature, residual abrasiveness and chemical compatibility — criteria FB engineering applies on every project. In Mundo Novo, series FBE+FBEI for transferência de melaço and dosagem de aditivos and series FBCN+FBOT for circulação de caldo and destilação — a combination that covers the typical local industrial demand. In Mundo Novo, sucroalcooleiro plants concentrate recurring demand for centrifugal pumps for utilities and positive-displacement pumps for viscous fluids. Due to proximity to the sucroalcooleiro cluster, Mundo Novo shares a technical agenda with juice circulation, molasses transfer, vinasse boost and thermal oil for evaporators — a direct path to series and materials selection. Mundo Novo among the 50 most populous cities in MS, maintains a relevant industrial base — a scale that translates into regular demand for rotating equipment. In Mundo Novo, fire-pump sets (electric, diesel or electric+diesel) follow NFPA 20 and NBR 16704 — supplied through FBFS.
Logistics lead time to Mundo Novo is 48-72h, with possible technical stop — variable with cargo type, season and specific optimizations. The technical-service model in Mundo Novo is structured as technical visits scheduled in advance, optimizing the specialized team's travel. 730 km separate the Cabreúva-SP factory from Mundo Novo via BR-262 (via Bauru-SP) — an axis sized for movement of pumps, skids and pump-and-motor sets. Equipment with above-conventional gauge bound for Mundo Novo is moved by road modal with dedicated route planning. Alternative routing to Mundo Novo can use BR-262, BR-163 and BR-267, which helps in heavy-traffic situations or maintenance on specific roads. The factory-to-Mundo Novo logistics cycle begins with documented dispatch: invoice, packing list, test certificates and the equipment's technical manual.
FB engineers serve Mundo Novo for the FBE series with a sized proposal — duty point, fluid, field conditions and supply lead time.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Own factory in Cabreúva/SP with full production capability, serving Mundo Novo and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Mundo Novo and the entire Mato Grosso do Sul region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteSoluções completas em bombeamento industrial com tecnologia de ponta
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for Mundo Novo
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from Mundo Novo — same series, same factory in Cabreúva/SP.
Yes. Since FB Bombas manufactures entirely in Cabreúva/SP, replacement parts for the FBE, FBEI, FBCN and FBOT series are available directly from the factory, with short lead times for scheduled stops and priority service for emergencies. This significantly reduces total cost of ownership.
FB pumps are supplied with a warranty against manufacturing defects according to the terms detailed in the commercial proposal. The warranty assumes installation, operation and maintenance within the parameters specified in the manual and sizing performed by engineering. Consult our technical team for specific details of your project in Mundo Novo.
Yes. FB Bombas application engineering supports ISO 10816 vibration analysis (velocity RMS in mm/s) for diagnosing misalignment, imbalance, bearing defects and cavitation on pumps installed in Mundo Novo. The service includes baseline capture at startup, spectral comparison during PM campaigns, and intervention recommendations (re-balancing, bearing replacement, laser alignment) before vibration exceeds the standard’s zone D.
For critical parts (mechanical seal, impeller, shaft, wear ring, bearings) during a plant shutdown in Mundo Novo, FB Bombas runs an emergency flow: pre-invoicing, priority dispatch and alternative modal (express road or air transport depending on distance and criticality). Typical lead time varies by region, with a window negotiable case by case. For customers with an installed base and scheduled PM, part of the stock can be kept on consignment at the plant.
Lead time depends on the chosen series, construction materials and stock availability. For standard configuration pumps, lead times are shorter; for special or custom constructions, the schedule is informed in the technical proposal. Logistics for Mundo Novo is handled by our regular road operator.
Yes. The FBCN series follows ASME B73.1 normalization (North American dimensional standard for end-suction process pumps) — which makes the pump-and-motor set interchangeable with global manufacturers (KSB, Sulzer, Goulds, Flowserve) already installed in plants in Mundo Novo. For retrofits, the existing baseplate, suction/discharge piping and foundations are usually preserved; what changes is the rotating set. FB application engineering performs the dimensional gap analysis prior to supply.
Yes. FB Bombas’ application engineering analyzes the installed pump specifications (flow, pressure, viscosity, temperature) and proposes dimensional or functional technical equivalence with one of our series. Many clients in Mundo Novo have already made this replacement with gains in lead time, cost and local support.
Yes. The FAT (Factory Acceptance Test) is executed on the factory bench in Cabreúva/SP, with hydraulic test, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration — witnessed by customer inspection when specified. For projects in Mundo Novo, the SAT (Site Acceptance Test) is supported by application engineering during commissioning, with startup checklist, laser alignment and baseline vibration-signature capture.
Quotes can be requested via WhatsApp at +55 11 97287-4837, email comercial@fbbombas.com.br or through our website form. Provide the application (fluid, flow, pressure, temperature) and the technical team will respond with a proposal sized for your conditions in Mundo Novo.
Yes. The FBE and FBCN lines were designed with easy access to wear-prone components, allowing disassembly and inspection with conventional tools. Detailed technical manuals and direct factory replacement parts availability simplify maintenance routines.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
