The óleos industriais and água industrial profile observed in Alto Alegre do Maranhão maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. For projects in Alto Alegre do Maranhão that demand formal technical qualification, FB Bombas series cover API 610 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Membership in the Leste Maranhense mesoregion (IBGE) places Alto Alegre do Maranhão in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. Industrial plants in Alto Alegre do Maranhão rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. Alto Alegre do Maranhão, Maranhão is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 80 years of continuous operation. For the local industry industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras certification, API 610 / API 676 compliance and ASME B73.1 normalization — basis for retrofit in plants with global manufacturers already installed. Logistically, the city connects to Cabreúva-SP via BR-135 (via Belém-Brasília BR-153), complemented by alternatives BR-135, BR-222 and BR-316 — a network that supports technical service within tight operational windows. From the Cabreúva-SP factory, 2143 km via BR-135 (via Belém-Brasília BR-153), FB Bombas reaches Alto Alegre do Maranhão with FBE, FBCN, FBOT inventory and engineering capability for special projects.
The óleos industriais and água industrial profile observed in Alto Alegre do Maranhão maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. For projects in Alto Alegre do Maranhão that demand formal technical qualification, FB Bombas series cover API 610 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Membership in the Leste Maranhense mesoregion (IBGE) places Alto Alegre do Maranhão in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. Industrial plants in Alto Alegre do Maranhão rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. Alto Alegre do Maranhão, Maranhão is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 80 years of continuous operation. For the local industry industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras certification, API 610 / API 676 compliance and ASME B73.1 normalization — basis for retrofit in plants with global manufacturers already installed. Logistically, the city connects to Cabreúva-SP via BR-135 (via Belém-Brasília BR-153), complemented by alternatives BR-135, BR-222 and BR-316 — a network that supports technical service within tight operational windows. From the Cabreúva-SP factory, 2143 km via BR-135 (via Belém-Brasília BR-153), FB Bombas reaches Alto Alegre do Maranhão with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Years
Certified
Warranty
Direct answer for industrial projects — recommended series, standards compliance and logistics.
The FBEI gear-pump line is specified in Alto Alegre do Maranhão, Maranhão for local industry — flow and pressure set by the actual system curve. Cabreúva-SP factory (2143 km), API 676 and direct technical service from FB engineering.
The óleos industriais and água industrial profile observed in Alto Alegre do Maranhão maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. For projects in Alto Alegre do Maranhão that demand formal technical qualification, FB Bombas series cover API 610 (FBCN), API 676 (FBE/FBEI), NFPA 20 and NBR 16704 (FBFS systems) — a combination that removes the need for additional suppliers across fire-fighting and process scope. Membership in the Leste Maranhense mesoregion (IBGE) places Alto Alegre do Maranhão in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. Industrial plants in Alto Alegre do Maranhão rely on FB Bombas spares held in scheduled stock: semi-open and open impellers, wear rings in various materials, dual cartridge seals API 682 Plan 53 and SKF/FAG bearings per the original spec. Alto Alegre do Maranhão, Maranhão is territory where FB Bombas operates as a Brazilian industrial-pump manufacturer with 80 years of continuous operation. For the local industry industrial profile dominating the region, we offer the FBE, FBCN, FBOT and FBEI series with CRCC Petrobras certification, API 610 / API 676 compliance and ASME B73.1 normalization — basis for retrofit in plants with global manufacturers already installed. Logistically, the city connects to Cabreúva-SP via BR-135 (via Belém-Brasília BR-153), complemented by alternatives BR-135, BR-222 and BR-316 — a network that supports technical service within tight operational windows. From the Cabreúva-SP factory, 2143 km via BR-135 (via Belém-Brasília BR-153), FB Bombas reaches Alto Alegre do Maranhão with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Alto Alegre do Maranhão typically calls for FBEI and FBCN — an initial recommendation based on local productFit, dominant industrial cluster and identified fluid profile; final technical approval is refined by application engineering. Alto Alegre do Maranhão: transferência geral and utilidades. This application mix is covered by the recommended FB series, with case-by-case fine tuning. In Alto Alegre do Maranhão, materials such as austenitic stainless steels (AISI 304/316) with attention to thermal expansion answer the requirements of óleos industriais and água industrial — a combination that drives service life of casing, impeller, shaft and shaft sleeve, refined via corrosion analysis using removal rates (mpy). For Alto Alegre do Maranhão, the FB protocol includes hydrostatic test at 1.5× design pressure, performance run and ISO 21940 G2.5 balancing — all documented in the Data Book.
Fluid-roster complexity in Alto Alegre do Maranhão is low — lean fluid roster — technical operation focused on few main vectors. Alto Alegre do Maranhão has a specific regional profile, with industrial demand sized to its scale — a feature that enters the sizing of the service strategy. The demand profile in Alto Alegre do Maranhão reflects medium density — regular and predictable opportunity pipeline. The fluid catalogue in Alto Alegre do Maranhão (óleos industriais and água industrial) demands case-by-case technical analysis: pour point, Saybolt viscosity at operating temperature, suspended solids and pH profile. Use cases in Alto Alegre do Maranhão (series FBEI for transferência geral and series FBCN for utilidades) follow the FB technical playbook with benchmarking against an analogous installed base in a comparable region.
For Alto Alegre do Maranhão, 72h to 7 days, depending on modal and dry season is the standard contractual transit window — compressible via emergency air modal for critical parts, on specific demand. Cabreúva-SP → Alto Alegre do Maranhão via BR-135 (via Belém-Brasília BR-153) (2143 km): a corridor with regular FB freight history, supporting indivisible loads and sets with escort when the gauge demands. For Alto Alegre do Maranhão, FB dispatch is preceded by: hydrostatic test at 1.5× design pressure, performance run with curve points, G2.5 dynamic balancing and Data Book closure — all traceable by serial number.
FB engineers serve Alto Alegre do Maranhão for the FBE series with a sized proposal — duty point, fluid, field conditions and supply lead time.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Own factory in Cabreúva/SP with full production capability, serving Alto Alegre do Maranhão and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves Alto Alegre do Maranhão and the entire Maranhão region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteSoluções completas em bombeamento industrial com tecnologia de ponta
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for Alto Alegre do Maranhão
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from Alto Alegre do Maranhão — same series, same factory in Cabreúva/SP.
FB Bombas holds: active CRCC at Petrobras (supplier registry for Oil & Gas); compliance with API 676 (international standard for positive displacement pumps — FBE series); compliance with API 610 (standard for centrifugal pumps in refineries — FBCN series); compliance with NFPA (National Fire Protection Association) standards and ABNT NBR 16704 for stationary fire protection pump systems.
Yes. FB Bombas offers retrofit of existing installations, including seal upgrades, replacement of worn components, adaptation for new fluids and hydraulic performance improvement. The assessment is based on a technical report of the current installation.
Yes. FB Bombas is a Brazilian manufacturer accredited in FINAME (BNDES Special Industrial Financing Agency), which qualifies equipment supplied to Alto Alegre do Maranhão for BNDES Finame financing lines (Industrial Working Capital, Modernization, Capital Goods) with preferential conditions for national industry. The commercial team provides the product FINAME code on the technical proposal for inclusion in the customer financial plan.
Yes. FB Bombas’ application engineering analyzes the installed pump specifications (flow, pressure, viscosity, temperature) and proposes dimensional or functional technical equivalence with one of our series. Many clients in Alto Alegre do Maranhão have already made this replacement with gains in lead time, cost and local support.
FB Bombas has been manufacturing industrial pumps since 1944, with over 82 years of continuous experience. The factory in Cabreúva/SP operates with engineering, manufacturing and testing under one roof, ensuring total quality control on every unit supplied to Alto Alegre do Maranhão and all of Brazil.
Lead time depends on the chosen series, construction materials and stock availability. For standard configuration pumps, lead times are shorter; for special or custom constructions, the schedule is informed in the technical proposal. Logistics for Alto Alegre do Maranhão is handled by our regular road operator.
The FB line covers a wide range: mineral and synthetic oils, asphalt (CAP), BPF fuel oils, petroleum derivatives, molasses, resins, viscous chemical and hydraulic products (FBE series); raw and treated water, process fluids, industrial effluents (FBCN series); thermal oil at elevated temperatures (FBOT series). Each application is sized according to fluid viscosity, temperature and chemical compatibility.
Yes. The FBCN series complies with ASME B73.1 (North American standard for horizontal end-suction process centrifugal pumps) — a feature that enables dimensional retrofit on existing baseplates in Alto Alegre do Maranhão plants originally equipped with KSB, Sulzer, Goulds or Flowserve. Shaft dimensions, suction/discharge flanges, casing feet and impeller centerline follow the standard; the rotating set is swapped without changing piping or baseplate.
FB Bombas manufactures three major lines: FBE (external gear) for viscous fluids, FBEI (internal gear) for lubricating fluids, FBCN (normalized centrifugal) for water and low-viscosity fluids, and FBOT (specific centrifugal) for thermal oil circuits. We also serve fire protection systems in compliance with NFPA and NBR 16704.
Maximum temperature depends on the series: FBE and FBEI operate up to 350°C with heating jacket and special sealing; FBOT operates up to 350°C in thermal oil circuits; FBCN operates up to 250°C with proper materials and sealing. Correct sizing of sealing and materials is essential for safe operation.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
