The óleos industriais and água industrial profile observed in São José do Calçado maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. São José do Calçado sits 162 km from the port cluster centered in Vitoria, a proximity that usually means shared suppliers and aligned maintenance standards. In São José do Calçado, Espírito Santo, FB Bombas serves local industry projects with the FBE, FBCN, FBOT and FBEI series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). FB Bombas maintains in São José do Calçado the technical portfolio of CRCC Petrobras + API 610 + API 676 + ASME B73.1 — a regulatory base that spans refining, petrochemicals, mining, sanitation, food, pulp and paper, sugar-ethanol and steel. Membership in the Sul Espírito-santense mesoregion (IBGE) places São José do Calçado in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. FB Bombas technical service in São José do Calçado covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. São José do Calçado is served by the BR-262 (via BR-381 Fernão Dias até MG) axis and also by highways BR-262 and BR-101 for heavy-cargo movement — relevant for delivery of mounted skids and large pump-and-motor sets. From the Cabreúva-SP factory, 618 km via BR-262 (via BR-381 Fernão Dias até MG), FB Bombas reaches São José do Calçado with FBE, FBCN, FBOT inventory and engineering capability for special projects.
The óleos industriais and água industrial profile observed in São José do Calçado maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. São José do Calçado sits 162 km from the port cluster centered in Vitoria, a proximity that usually means shared suppliers and aligned maintenance standards. In São José do Calçado, Espírito Santo, FB Bombas serves local industry projects with the FBE, FBCN, FBOT and FBEI series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). FB Bombas maintains in São José do Calçado the technical portfolio of CRCC Petrobras + API 610 + API 676 + ASME B73.1 — a regulatory base that spans refining, petrochemicals, mining, sanitation, food, pulp and paper, sugar-ethanol and steel. Membership in the Sul Espírito-santense mesoregion (IBGE) places São José do Calçado in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. FB Bombas technical service in São José do Calçado covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. São José do Calçado is served by the BR-262 (via BR-381 Fernão Dias até MG) axis and also by highways BR-262 and BR-101 for heavy-cargo movement — relevant for delivery of mounted skids and large pump-and-motor sets. From the Cabreúva-SP factory, 618 km via BR-262 (via BR-381 Fernão Dias até MG), FB Bombas reaches São José do Calçado with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Years
Certified
Warranty
Direct answer for industrial projects — recommended series, standards compliance and logistics.
FBEI gear pumps (FB Bombas) in São José do Calçado, Espírito Santo: sized for local industry, viscous fluids up to 350°C, API 676 compliance and in-house manufacturing in Cabreúva-SP at 618 km. Typical critical-parts lead time: 48-72h.
The óleos industriais and água industrial profile observed in São José do Calçado maps to a precise set of FB series: high viscosity → FBE/FBEI; water and low viscosity → FBCN; heat transfer → FBOT; fire protection → FBFS. São José do Calçado sits 162 km from the port cluster centered in Vitoria, a proximity that usually means shared suppliers and aligned maintenance standards. In São José do Calçado, Espírito Santo, FB Bombas serves local industry projects with the FBE, FBCN, FBOT and FBEI series — dedicated application engineering for sizing against the actual system curve, CRCC Petrobras certification and technical compliance with API 610 (centrifugal), API 676 (gear) and NFPA 20 / NBR 16704 (fire fighting). FB Bombas maintains in São José do Calçado the technical portfolio of CRCC Petrobras + API 610 + API 676 + ASME B73.1 — a regulatory base that spans refining, petrochemicals, mining, sanitation, food, pulp and paper, sugar-ethanol and steel. Membership in the Sul Espírito-santense mesoregion (IBGE) places São José do Calçado in a regional economic mesh — a factor FB Bombas uses to optimize multi-city maintenance campaigns and consolidate freight across customers along the same axis. FB Bombas technical service in São José do Calçado covers centrifugal- and gear-pump sizing, commissioning support, assisted startup and operator training — a scope that spans the full technical-supply cycle. São José do Calçado is served by the BR-262 (via BR-381 Fernão Dias até MG) axis and also by highways BR-262 and BR-101 for heavy-cargo movement — relevant for delivery of mounted skids and large pump-and-motor sets. From the Cabreúva-SP factory, 618 km via BR-262 (via BR-381 Fernão Dias até MG), FB Bombas reaches São José do Calçado with FBE, FBCN, FBOT inventory and engineering capability for special projects.
Typical applications mapped for São José do Calçado include transferência geral and utilidades — each with its own requirements for NPSH, acceptable pulsation and start-up strategy. For the technical profile observed in São José do Calçado, FB Bombas application engineering recommends FBEI and FBCN as a starting point for sizing, subject to refinement per Q×H curve, available NPSH and actual fluid temperature. In São José do Calçado, materials such as cast iron with proper coating or stainless steels when the fluid requires answer the requirements of óleos industriais and água industrial — a combination that drives service life of casing, impeller, shaft and shaft sleeve, refined via corrosion analysis using removal rates (mpy). In São José do Calçado, the sealing strategy starts at single cartridge mechanical seal (Plan 11/13) for general service, upgradable to dual when the fluid requires secondary containment — combined with API 682 plan selection (Plan 11/13/52/53/62) and specific commissioning care. The pump-and-motor set shipped to São José do Calçado undergoes bench hydraulic testing and G2.5 dynamic balancing (ISO 21940), with a traceable report.
Technically, São José do Calçado shows low complexity in its fluid mix — lean fluid roster — technical operation focused on few main vectors. São José do Calçado: has a specific regional profile, with industrial demand sized to its scale, a structural variable in the commercial offer. Demand in São José do Calçado is characterized by medium density — regular and predictable opportunity pipeline, a typical regional pattern of the mesoregion. Working with óleos industriais and água industrial in São José do Calçado demands attention to viscosity at operating temperature, residual abrasiveness and chemical compatibility — criteria FB engineering applies on every project. In São José do Calçado, series FBEI for transferência geral and series FBCN for utilidades — a combination that covers the typical local industrial demand. Due to proximity to the portuario cluster, São José do Calçado shares a technical agenda with bunker (BPF fuel oil), marine cooling water and liquid-bulk discharge — a direct path to series and materials selection. In São José do Calçado, fire-pump sets (electric, diesel or electric+diesel) follow NFPA 20 and NBR 16704 — supplied through FBFS.
São José do Calçado receives equipment within 24-48h via federal highways counted from dispatch at the Cabreúva-SP factory. Cabreúva-SP to São José do Calçado: 618 km via BR-262 (via BR-381 Fernão Dias até MG), a consolidated corridor with carriers qualified by FB Bombas for heavy-equipment cargo. São José do Calçado: technical service is organized as planned technical visits with 1-2 day mobilization window — direct coordination with the customer — the model FB Bombas uses to ensure support without overloading operations. Before shipment to São José do Calçado, each piece of equipment undergoes dimensional inspection, hydraulic testing and document verification.
Technical inquiry for the FBE series in São José do Calçado: real-curve sizing, material recommendation and sealing configuration. Direct service from the FB team.
Talk to engineeringFor over 82 years, we have manufactured industrial pumps in Cabreúva-SP. From north to south, we serve the country's main industrial hubs with gear (FBE/FBEI) and centrifugal (FBCN/FBOT) pumps — engineered, machined and assembled in our own manufacturing facility.
Our engineering team sizes each pump for the customer's actual application, with bench testing before shipping. This technical rigor — combined with direct support from our team — is what has sustained the trust of groups like Petrobras, Vale and CSN for generations.
Four differentiators that make FB Bombas the choice of leading Brazilian industries.
Technical support across all 27 Brazilian states, from inland regions to major industrial capitals.
Nationwide deliveries through partner carrier network with optimized lead times.
Technical team available for sizing, project work and after-sales support across any region.
Original parts in stock for all series, ensuring operational continuity with zero downtime.
Own factory in Cabreúva/SP with full production capability, serving São José do Calçado and all of Brazil
Engineering, CNC machining and assembly — all integrated in our Cabreúva/SP factory.
We size and build complete systems, ready for installation at your industrial plant.
We keep original parts in stock for all series, ensuring continuity of your operation.
Production line with centrifugal and gear pumps assembled and tested in our manufacturing plant.
FB Bombas serves São José do Calçado and the entire Espírito Santo region with gear pumps (internal & external) and centrifugal pumps for your industrial application. Request a quote and receive a personalized proposal.
Request QuoteSoluções completas em bombeamento industrial com tecnologia de ponta
Our technical team is ready to develop the ideal solution for your application
Fale Conosco
Our manufacturing plant in Cabreúva-SP integrates engineering, CNC machining and assembly under one roof. Every pump is validated through bench testing before reaching the customer — ensuring it ships ready for real application.
Present in the largest industrial projects in Brazil and Latin America
See specific solutions for São José do Calçado
Brazilian sectors for which FB Bombas sizes equipment — complete technical guides per application.
Regional service from São José do Calçado — same series, same factory in Cabreúva/SP.
Sizing is performed by FB Bombas’ application engineering team based on four key variables: desired flow, differential pressure, working temperature and fluid viscosity. Additional data such as available NPSH, operating cycle and fluid chemical compatibility are also considered. The service is free of charge for customers in São José do Calçado.
Yes. FB Bombas manufactures pumps for stationary fire protection systems in compliance with NFPA (National Fire Protection Association) and ABNT NBR 16704 standards, serving building and industrial projects that require these certifications.
Yes. FB Bombas serves the entire metropolitan region and microregions neighboring São José do Calçado with the same technical support and logistics structure. This regional reach allows serving industrial plants distributed across multiple cities in a coordinated way.
Shorter delivery times (no import dependency), direct technical support from FB engineering, replacement parts with in-house manufacturing, prices in local currency (no exchange rate exposure) and on-site service for projects in São José do Calçado and surrounding areas. FB Bombas has been manufacturing in Brazil since 1944.
Yes. FB Bombas application engineering supports ISO 10816 vibration analysis (velocity RMS in mm/s) for diagnosing misalignment, imbalance, bearing defects and cavitation on pumps installed in São José do Calçado. The service includes baseline capture at startup, spectral comparison during PM campaigns, and intervention recommendations (re-balancing, bearing replacement, laser alignment) before vibration exceeds the standard’s zone D.
Yes. The FAT (Factory Acceptance Test) is executed on the factory bench in Cabreúva/SP, with hydraulic test, characteristic-curve measurement (Q × H), hydraulic efficiency, NPSHr and ISO 10816 vibration — witnessed by customer inspection when specified. For projects in São José do Calçado, the SAT (Site Acceptance Test) is supported by application engineering during commissioning, with startup checklist, laser alignment and baseline vibration-signature capture.
Mechanical seal configuration is defined by engineering according to the fluid, temperature and operating pressure. Options include single seals, double seals (tandem or back-to-back), cartridge seals and packing glands for specific applications. For hazardous fluids, double seals with barrier are recommended.
Yes. FB Bombas is a Brazilian industrial-pump manufacturer since 1944, with a factory in Cabreúva/SP and a technical team for projects in São José do Calçado. The FBCN (centrifugal), FBE/FBEI (gear) and FBOT (thermal oil) series cover applications typically served by global manufacturers such as KSB, Sulzer, Imbil and Grundfos — with advantages in lead time (no import), direct support without intermediaries, fast spare-parts availability and Portuguese-speaking application engineering. For retrofits, ASME B73.1 normalization ensures dimensional interchangeability with existing baseplates.
Yes. The FBE and FBCN lines were designed with easy access to wear-prone components, allowing disassembly and inspection with conventional tools. Detailed technical manuals and direct factory replacement parts availability simplify maintenance routines.
Yes. The FBCN series complies with ASME B73.1 (North American standard for horizontal end-suction process centrifugal pumps) — a feature that enables dimensional retrofit on existing baseplates in São José do Calçado plants originally equipped with KSB, Sulzer, Goulds or Flowserve. Shaft dimensions, suction/discharge flanges, casing feet and impeller centerline follow the standard; the rotating set is swapped without changing piping or baseplate.
Fill out the form and our technical team will contact you to size the ideal pump — gear (FBE/FBEI) or centrifugal (FBCN/FBOT).
